• 패션비즈니스
• /
• 제18권6호
• /
• pp.116-136
• /
• 2014

The purpose of this study was to select patterns for slim fit pants, for the following main research, to develop new pants patterns that are suitable and preferable for men in their 20s. We compared and analyzed the patterns of which are currently in the market. We compared 10 different slim pants pattern drafting and analyzed their differences. Then, we examined their appearances and functionalities thru a male model test fitting 10 different samples of the pants. The conclusions of the research results were as follows. We listed the patterns in the following order based on the numbers of items each pattern has, which are statistically considerable for the evaluation to the optimum satisfactory level among the total of 35 testing categories: J > B=I > F=H > A > C=G > D > E. In the functionality test of the pants, we found that it was too tight around the waist and abdomen area with Pattern D, where-as it was too loose around the waist with Pattern C:,-, yet, both of the patterns indicated that it is a good fit in over-all. Therefore, we chose Pattern E, D, C, and G as the existing pants patterns that could be used for further research and for educational purposes to develop a slim pants pattern for men in their 20s.

• 한국생활과학회지
• /
• 제15권6호
• /
• pp.1037-1047
• /
• 2006

In this paper, various structures of the healthcare smart clothing for real-time measurement of vital sign were suggested. The wearing efficiency was evaluated to find out the best ergonomic clothing in the suggested design. The supplementary effects of the clothing components (princess line, double fabric, cushion) on the stable and tight positioning of sensors to the body were evaluated with wear test. Five experimental clothing for male subject were made with closely-fitted shape and they included two representative structure: one was the integrated type of inner and outer garments and the other was the separated type with two garments. Eight subjects in their twenties were participated in the wear test to evaluate the wearing efficiency of experimental clothing. As results, the clothing structure of the separated garments with the inner and the outer shells were evaluated as more efficient and comfortable. However, the effects of clothing components on the light positioning of the sensors to the body surface were not differentiated each other in the subjective evaluation.

• 복식
• /
• 제35권
• /
• pp.167-180
• /
• 1997

The purpose of this study was to find out some of the problems consumers have with ready to wear garments sizing and clothing satisfaction the following women's garments; sweaters T-shirts blouses jackets pants skirts one-piece jumpers and burberry(coats). For this study questionnaires were administered to female students in community college. Employing a sample of 166 students data were analyzed by Frequencies X2-test t-test ANOVA Factor Analysis and Regression. Major results of this study were summerized as follows: 1) Purchasing clothing subjects considered mainly bust circumference for T-shirts and blouse shoulder width for jackets and jumpers hip circumference for pants and skirts and length for sweaters(knit) one-piece and burberry(coats) as a reference of fitting sites. 2) In relation with dissatisfaction with apparel fit hip circumference of pants including jeans was found as the most unsatisfactory site. Besides subjects were dissatisfied with skirts sweaters one-piece jackets blouses burberry(coats) jumpers T-shirts in order. In relateion with height and body type were most dissatisfied with pants(jeans) 3) Factors related to clothing deprivation of ready-to-wear garment were identified as aethetics elements practical elements economic elements and fittness elements. Fittness elements were most dissatisfied factors with all items of garments except for skirts.

• 한국의류산업학회지
• /
• 제11권6호
• /
• pp.887-895
• /
• 2009

The purposes of this study were to provide informations to apparel companies and to contribute the education of clothing consumers through finding out the present status of clothes purchasing behaviors and the degree of the recognition and the application of care labels of the Chinese students in Daegu area. The data were collected from 166 Chinese students through the questionnaire and analyzed by the frequence, t-test, ANOVA, and Scheffe-test using SPSS 12.0. The results were as follows: 1. The main purchasing place was road shops of well-known brands, and the most decisive factor of purchasing was the display style of goods. They purchased 'any time when necessary' and impulsively. They payed mostly by cash and the most affecting factor of purchasing decision was the degree of fitting. 2. The recognition of the necessity of care label was found in 36.7% of respondent and their most rationale was 'for the management of clothes'. The recognition of care labels showed the highest in reliability and the lowest in application. There were significant differences in satisfaction of care label between male and female and in application according to purchasing places. In conclusion, the recognition of the necessity of care labels showed a little high level but relatively low in the understanding and the application.

• 비파괴검사학회지
• /
• 제37권2호
• /
• pp.115-121
• /
• 2017

The nonlinear ultrasonic technique is a potential nondestructive method to evaluate material degradation, in which the ultrasonic nonlinearity parameter is usually measured. The ultrasonic nonlinearity parameter is defined by the elastic nonlinearity coefficients of the nonlinear Hooke's equation. Therefore, even though the ultrasonic nonlinearity parameter is not equal to the elastic nonlinearity parameter, they have a close relationship. However, there has been no experimental verification of the relationship between the ultrasonic and elastic nonlinearity parameters. In this study, the relationship is experimentally verified for a heat-treated aluminum alloy. Specimens of the aluminum alloy were heat-treated at $300^{\circ}C$ for different periods of time (0, 1, 2, 5, 10, 20, and 50 h). The relative ultrasonic nonlinearity parameter of each specimen was then measured, and the elastic nonlinearity parameter was determined by fitting the stress-strain curve obtained from a tensile test to the 5th-order-polynomial nonlinear Hooke's equation. The results showed that the variations in these parameters were in good agreement with each other.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권1호
• /
• pp.33-39
• /
• 2018

Purpose: Accelerated degradation tests can be effective in assessing product reliability when degradation leading to failure can be observed. This article proposes an accelerated degradation test model for highly reliable solid state drives (SSDs). Methods: We suggest a nonlinear mixed-effects (NLME) model to degradation data for SSDs. A Monte Carlo simulation is used to estimate lifetime distribution in accelerated degradation testing data. This simulation is performed by generating random samples from the assumed NLME model. Conclusion: We apply the proposed method to degradation data collected from SSDs. The derived power model is shown to be much better at fitting the degradation data than other existing models. Finally, the Monte Carlo simulation based on the NLME model provides reasonable results in lifetime estimation.

• Earthquakes and Structures
• /
• 제12권1호
• /
• pp.23-34
• /
• 2017

Composite steel plate deep beam (CDB) is proposed as a lateral resisting member, which is constructed by steel plate and reinforced concrete (RC) panel, and it is connected with building frame through high-strength bolts. To investigate the seismic performance of the CDB, tests of two 1/3 scaled specimens with different length-to-height ratio were carried out under cyclic loads. The failure modes, load-carrying capacity, hysteretic behavior, ductility and energy dissipation were obtained and analyzed. In addition, the nonlinear finite element (FE) models of the specimens were established and verified by the test results. Besides, parametric analyses were performed to study the effect of length-to-height ratio, height-to-thickness ratio, material type and arrangement of RC panel. The experimental and numerical results showed that: the CDBs lost their load-carrying capacity because of the large out-of plane deformation and yield of the tension field formed on the steel plate. By increasing the length-to-height ratio of steel plate, the load-carrying capacity, elastic stiffness, ductility and energy dissipation capacity of the specimens were significantly enhanced. The ultimate loading capacity increased with increasing the length-to-height ratio of steel plate and yield strength of steel plate; and such capacity increased with decreasing of height-to-thickness ratio of steel plate and gap. Finally, a unified formula is proposed to calculate their ultimate loading capacity, and fitting formula on such indexes are provided for designation of the CDB.

• 한국농공학회지
• /
• 제38권4호
• /
• pp.110-124
• /
• 1996

This study was conducted to simulate long seres of synthetic monthly flows by multi-season first order Markov model with selection of best fitting frequency distribution, harmonic synthetic and harmonic regression models and to make a comparison of statistical parameters between observes and synthetic flows of five watersheds in Geum river system. The results obtained through this study can be summarized as follow. 1. Both gamma and two parameter lognormal distributions were found to be suitable ones for monthly flows in all watersheds by Kolmogorov-Smirnov test. 2. It was found that arithmetic mean values of synthetic monthly flows simulated by multi-season first order Markov model with gamma distribution are much closer to the results of the observed data in comparison with those of the other models in the applied watersheds. 3. The coefficients of variation, index of fluctuation for monthly flows simulated by multi-season first order Markov model with gamma distribution are appeared closer to those of the observed data in comparison with those of the other models in Geum river system. 4. Synthetic monthly flows were simulated over 100 years by multi-season first order Markov model with gamma distribution which is acknowledged as a suitable simulation modal in this study.

• 한국광학회지
• /
• 제13권2호
• /
• pp.98-104
• /
• 2002

비구면 광학부품의 수차 측정 및 성능 평가를 위해 특별 설계된 층밀리기 간섭계를 소개하고, 이와 더불어 층밀리기 간섭계가 갖는 자체의 계통오차를 측정결과로부터 제거하기 위한 보정 방법을 제안한다. 층밀리기 간섭계의 계통오차는 크게 간섭광학계가 갖는 광학오차와 간섭계의 기구부의 불완전에 기인한 층밀리기 방향의 직교오차로 구분할 수 있다. 이들 두 계통 오차들은 모두 본 논문에서 제안하는 방법으로 모두 보정될 수 있다. 보정 방법은 측정 대상물을 간섭계의 광축을 중심으로 회전하여 측정결과로부터 계통오차를 분리하는 자가보정 원리에 근거한다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.60-63
• /
• 2002

Metal/intermetallic laminated composites have been manufactured by SHS reactions between Ni and Al elemental metal foils. Microstructure showed that the intermetallic volume fraction was 55%, 45%, 35% in the 1:1, 2:1, 4:1 thickness ratio(Ni:Al) specimen and the main phases of the intermetallic were transformed from $Ni_2Al_3$ to NiAl when the thickness ratio was increased. Tensile strength and elongation were increased when the volume fraction of Ni metallic phase was increased. Under assumptions of isostrain condition, the tensile strength of metal/intermetallic laminated composites didn't obey the ROM due to the thermal residual stress and this was confirmed by X-ray residual stress analysis. Fracture toughness results by the SENB test showed R-curves with upward curvature based on LSB condition. Bridging stress based on LSB condition was determined by the curve fitting analysis, In-situ observed microstructure during fracture test showed that the various bridging mechanism such as crack bridging, crack branching and ductile failure of metallic layer were occurred