• Journal of Korean Society for Quality Management
• /
• v.36 no.4
• /
• pp.87-92
• /
• 2008

It is common to use CUSUM charts for detecting small level shifts in processes control, in which reference value(k) and decision interval(h) are the design parameters to be determined. To control process with autocorrelation, CUSUM charts could be applied to residuals obtained from fitting ARIMA models. However, constant level shifts in processes lead to varying mean shifts in residual processes and thus standard CUSUM charts may need to be modified. In this paper, we study the performance of CUSUM charts with various design parameters applied to autocorrelated processes, especially focussing on ARMA(1,1) models, and propose how they can be determined to get better performance in terms of the average run length.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1047-1048
• /
• 2008

The objective of this paper is to build a decision method of the shape quality for the stainless steel and ensure reducibility of working-load for next rolling process. The criterion of the shape quality is derived from the customer needs, and Automatic Shape Decision System is implemented in SPM (Skin Pass Mill). The methods of shape decision are based on curve fitting and frequency analysis and so on. The Field Test with concerned customers is successful. The performance of right decision is 99% and the claims from the customer have been largely reduced.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.1
• /
• pp.120-126
• /
• 2002

The near net shape forging of gears offers significant technical and economic advantages ever other forms of manufacture. These potential benefits can however only be realized by careful die design. This paper describes a computer-based methodology fur achieving this. A Visual-BASIC program has been developed on a rule based system that enables optimal design of the dies taking into account the elastic deflections generated in shrink-fitting the die inserts and that caused by the stresses generated in the forging process. The method also enables the profile of the spark erosion electrode to be determined. An example of the application to forging spur gears is given.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.238-243
• /
• 1986

Distillation columns are widely used in almost every chemical plant. The use of multivariable control for such units is attractive because of the strong interactions exhibited between outputs and inputs and the desire to control simultaneously both top and bottom products. In this research design of a robust multivariable controller for distillation column was considered; output feedback controller with proportional and integral modes was designed using pole assignment. The transfer function matrix was obtained by fitting the step response realtions between single input double output pairs of variables. This matrix was then converted to linear time invariant state space model by multivariable realization technique. With the proposed multivariable proportional and integral controller applied to the process, the result of the digital computer simulation showed a good performance of asymtotic tracking. The limited experimental performance of this multivariable control was compared with the result from simulation. It was found that the proposed controller performed satisfactorily for the distillation column which separated binary mixture of methanol and water.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2002.09a
• /
• pp.28-34
• /
• 2002

The b-value in the magnitude-frequency relationship logN(m) = $\alpha$ - bmwhere N(m) is the number of earthquakes exceeding magnitude m, is important seismicity parameter In hazard analysis. Estimation of the b-value for earthquake data observed on KSRS array network is done employing the maximum likelihood technique. Assuming the whole Korea Peninsula as a single seismic source area, the b-value is computed at 0.9. The estimation for KMA earthquake data is also similar to that. Since estimate is a function of minimum magnitude, we can inspect the completeness of earthquake catalog in the fitting process of b-value. KSRS and KMA data lists are probably incomplete for magnitudes less than 2.0 and 3.0, respectively. Examples from probabilistic seismic hazard assessment calculated for a range of b-value show that the small change of b-value has seriously effect on the prediction of ground motion.

• Journal of the Korean Society for Railway
• /
• v.7 no.2
• /
• pp.107-113
• /
• 2004

This study presents a development of DeCatS(Detail Design of High Speed Catenary System) which is a software to design high speed catenary system automatically. The program is developed by Korea Railroad Research Institute with the support of KHSR. A process of developing it and a comparison with LEXCAT. in order to demonstrate a preciseness of that, were performed. In the program, decision of H-beam, cantilever fitting, management of materials, automatic drawing and etc. according to input conditions can be accomplished. In this study, especially the program algorithm for the decision of mast was introduced.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.192-193
• /
• 2000

We studied the characteristics and fabricated the plano-convex refractive microlenses using the thermal reflow method. The exposed resist was resolved in a standard developing process. The remaining resist of circle pattern was melted in an oven 12$0^{\circ}C$ to 15$0^{\circ}C$. The shape of the melted resist microlenses is ruled by surface tension. Diameter and hight of the fabricated microlenses were 250${\mu}{\textrm}{m}$ to 325${\mu}{\textrm}{m}$ and 15${\mu}{\textrm}{m}$ to 22${\mu}{\textrm}{m}$, respectively. The surface profile was calculated using data curve-fitting method with circle equation. The optical characteristics was analysed using optical simulation program.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.03a
• /
• pp.124-130
• /
• 1995

An upper-bound elemental stream function technique(UBST) is proposed for solivng forging and backward extrusion problems that are geometrically complex or need a forming simulation . And in the forging problems, this study investigates that layer of elements effects dissipation of total energy and load. The element system of UBSTuses the curve fitting property of FEM and the fluid incompressiblity of the stream function . The foumulated optimal design problems with constraints ae solved by the flixible toerance method. In the closed-die forging and backward extrusion, the result of layer of element by this study produces a lower upper-bound solution than that fo UBET and conventional layer of element . And the main advantage of UBST program is that a computer code, once written , can be used for a large variety problems by simply changing the input data.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.10
• /
• pp.939-944
• /
• 2004

The numerical methods including the performance analysis and the noise prediction of the centrifugal compressor impeller are coupled with the optimization design skill, which consists of response surface method, statistical approach, and genetic algorithm. The flow-field Inside of a centrifugal compressor is obtained numerically by solving Wavier-Stokes equations. and then the propagating noise is estimated from the distributed surface pressure by using Ffowcs Williams-Hawkings formulation. The quadratic response surface model with D-optimal 3-level factorial experimental design points is constructed to optimize the impeller geometry for the advanced centrifugal compressor. The statistical analysis shows that the quadratic model exhibits a reasonable fitting quality resulting in the impeller blade design with high performance and low far-field noise level. The influences of selected design variables, objective functions, and constraints on the impeller performance and the impeller noise are also examined as a result of the optimization process.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.11 no.2
• /
• pp.15-29
• /
• 2007

In this paper, we explore some interesting models of the quasi-negative-binomial distribution based on difference differential equations applicable to theory of microorganisms and the situations like that. Some characterizations based on conditional distributions and damage process have been obtained. Further, the distribution of number of accidents as the quasi-negative-binomial distribution in the light of Irwin's theory of ";proneness-liability"; model has been derived. Finally, the proposed model (QNBD) has been applied to study the Shunting accidents, home injuries, and strikes in industries.