• 전자공학회논문지
• /
• 제52권4호
• /
• pp.135-144
• /
• 2015

지문의 땀샘(pore)은 지문인식 분야에서 아주 유용한 특징의 하나이고 땀샘에 기반한 지문인식 시스템도 많이 제안되었다. 땀샘 정보를 이용하여 지문을 인식하려면 땀샘을 정확하게 추출하는 것이 아주 중요하다. 기존의 땀샘 추출 방법은 2차원 모델정합 기법을 이용하여 땀샘 중심을 검출한다. 본 논문에서는 2차원 모델보다 간단한 1차원 가우시안 모델을 이용한 땀샘 추출 방법을 제안한다. 1차원 모델을 이용하여 모델정합하는 과정에 2차원 모델보다 적은 연산량을 필요한다는 장점이 있다. 제안하는 방법은 먼저 국부적 융선(ridge)의 방향을 계산하고 융선 마스크(ridge mask)를 생성한 다음 땀샘 중심이 주변보다 밝다는 성질을 이용하여 사이즈가 각각 $3{\times}3$과 $5{\times}5$인 필터로 땀샘 후보를 찾는다. 검출된 땀샘 후보에 대하여 1차원 가우시간 모델정합을 적용하여 땀샘 중심을 검출한다. 땀샘 추출 실험을 통하여 제안하는 방법은 기존의 2차원 모델에 기반한 방법보다 더 높은 땀샘 검출률을 보여주었고 땀샘 매칭 실험을 통하여 제안하는 땀샘 추출 방법이 지문인식에 사용될 수 있음을 보여준다.

• 청정기술
• /
• 제15권4호
• /
• pp.265-272
• /
• 2009

본 연구에서는 하수슬러지에서 만든 활성탄을 이용하여 벤젠에 대한 정지(static)흡착실험을 수행하였다. 7.999 kPa에 이르는 압력 범위 내에서 온도 조건을 변화시켜 가며 303.15, 318.15, 333.15 K에서 흡착실험을 진행하였다. 등온흡착곡선은 Langmuir isotherm, Freundlich isotherm, Toth isotherm을 적용하여 비교하였다. 벤젠의 흡착량(q)을 fitting한 결과 Langmuir isotherm과 Toth isotherm으로 fitting한 등온흡착 곡선의 정확도가 높은 것으로 나타났다. 그리고 Langmuir isotherm의 $q_{max}$ 값을 이용하여 흡착제의 흡착량을 비교하였다. 또한, 하수슬러지 활성탄과 상용활성탄의 세공 발달 여부를 비교하기 위해 SEM image를 관찰하였다. SEM image 관찰 결과, 국내외 상용활성탄(DARCO A.C., SPG-100 A.C.)이 하수슬러지 활성탄에 비해 세공발달 정도가 우수하며, 세공발달 정도가 우수한 국내외 상용활성탄(DARCO A.C., SPG-100 A.C.)이 하수슬러지 활성탄에 비해 벤젠흡착량(q)이 높은 것을 확인할 수 있었다. 그러나 실온조건인 303.15K에서 하수슬러지의 최대 벤젠흡착량($q_{max}$)은 국내 상용활성탄(SPG-100 A.C.)의 최대 벤젠흡착량($q_{max}$)과 대등한 수치로 나타났으므로 하수슬러지 활성탄의 상용화 가능성을 검증할 수 있었다.

• 복식
• /
• 제24권
• /
• pp.157-176
• /
• 1995

The purpose of this treatise is to study external form and internal meaning of minimal expression fashion which appeared as a major stream in modern fashion trends to understand one aspect of modernism in fashion and also to gain insight into internal value of human beings through fashion. The results can be summarized as follows : Firstly , minimalism is a trend in art attempting to seek essence of the object by presenting simple and disciplined expressions by minimal formative means and minimal production process. Secondly, minimal expression in fashion means seeking simplicity an dpurity by using minimum design elements and minimal productive process. Thirdly, external from of minimal expression fashion can be created through application of following minimal expression techniques. 1. Minimal expression techniques in terms of line mean smooth curve flowing along body contours, straight lines of diagonal lines into desciplined silhouette or rendering internal contour lines. 2. Minimum expression techniques in terms of forms mean forms of smooth curves flowing along boyd or forms with simple geometric forms from qualitative aspects, In terms of volume it means quest for essence of pure body itself by revealing body as it is by minimizing the size of dress or its area and herein is contained using simple geometric pattern or utilizing textiles without any patterns.3. Minimal expression techniques by colors mean simple colors such as primary colors, colors without clear distinctions or natural colors and in terms of quantity it means quest for one color within one item of dress or combination of each items when getting dressed. 4. Minimal expression techniques in terms of fabrics mean fabrics with simple surfaced. In terms of quantity it means quest for essence of tight fitting thin textiles to human body or using transparent materials to human body thus exposing body contours as it is. 5. Minimal expression techniques in terms of productive process mean minimizing process of tailoring , sewing or ornamenting and seeking for simplicity and purity. 6. Minimal expression techniques in terms of manufacturing process mean selection of technique conveying simple image with disciplined simple image. Fourthly, minimal expression fashion with external expression as mentioned in the above lay body-priority style and its internal meaning can be asummed as quest for essence and purity of human body.

• 대한공간정보학회지
• /
• 제19권1호
• /
• pp.79-86
• /
• 2011

최근 수치표고모델(DEM : Digital Elevation Model)을 구축하기 위한 목적으로 항공레이저측량(LiDAR : Light Detection And Ranging) 기술이 주목받고 있다. DEM은 항공레이저측량으로부터 획득된 라이다 데이터에서 지면점만 추출한 수치지면자료(DTD : Digital Terrain Data)의 정확성에 의해 그 품질이 좌우된다. 하지만 원시자료에서 수치지면자료를 추출하기 위한 자동 필터링 작업은 필터링 알고리즘의 한계 및 라이다 데이터의 고유한 특성으로 인하여 항상 오분류 영역이 발생한다. 따라서 이를 보완하기 위해서는 작업자에 의한 수동분류 작업이 반드시 필요하다. 본 연구에서는 수동 작업이 원활하게 이루어 질 수 있도록 자동 필터링 작업에서 얻어진 수치지면자료에서 오분류 될 가능성이 있는 영역을 자동으로 탐지하는 알고리즘을 제안한다. 제안된 알고리즘은 2D 격자 구조를 적용하였으며 'Slope Angle', 'Slope DeltaH', 'NNMaxDH(Nearest Neighbor Max Delta Height)'로 명명한 매개변수를 사용하였다. 실험 결과, 제안된 알고리즘은 지형형태나 라이다 데이터 평균 점밀도에 제한받지 않는 안정적인 결과를 보여주었다.

• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2753-2759
• /
• 2013

The aim of the present study is to explore the possibility of utilizing fly ash and loess, as alternative to activated carbon, for the adsorption of diazinon in water. Batch adsorption experiment was performed to evaluate the influences of various factors like initial concentration, contact time and temperature on the adsorption of diazinon. The adsorption data shows that fly ash is not effective for the adsorption of diazinon. The equilibrium data for both activated carbon and loess were fitted well to the Freundlich isotherm model. The pseudo-second-order kinetic model appeared to be the better-fitting model because it has higher $R^2$ compared to the pseudo-first-order kinetic model. The thermodynamic parameters such as free energy (${\Delta}G$), the enthalpy (${\Delta}H$) and the entropy (${\Delta}S$) were calculated. Contrary to loess, the ${\Delta}G$ values of activated carbon were negative at the studied temperatures. It indicates that the adsorption of diazinon by activated carbon is a favorable and spontaneous process. The positive ${\Delta}H$ values of activated carbon and loess suggest that the diazinon adsorption process is endothermic in nature. In addition, the positive ${\Delta}S$ values show that increased randomness occurs at the solid/solution surface during the adsorption of diazinon.

• 한국항공운항학회지
• /
• 제20권4호
• /
• pp.50-56
• /
• 2012

Rotor system is a very important part which produce lift, thrust and control force in helicopter. Component of rotor system must have structural integrity for applied load. The estimation of structural integrity is regarded greatly as important in aerospace field. In this study, the process of structural analysis performed for bearingless main rotor system of helicopter. The composite flexbeam and torque tube of bearingless main rotor are very thick, so 3D layered soild elements of MSC.PATRAN were used to get the finite element analysis results. To estimate structural integrity, non-linear static analysis considering geometric non-linearity is performed. In addition, detailed finete element analysis and non-linear static analysis are performed to consider the stress concentration for fitting effect and contact surface. The estimation process of structural integrity for bearingless main rotor system of helicopter may help the design.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.40-45
• /
• 2004

Recently, aspheric optical lenses and mirrors, which are harder to manufacture and measure than the conventional spherical ones, are widely used, particularly in electronic fabrication process. Generally, interferometric optical method is used for the measurement of spherical optical surface. However, the interferometric method for aspheric surface measurement is difficult because it needs a precise null corrector and strict environmental conditions such as constant temperature, humidity and vibrations. We have been studied on the manufacturing of aspheric optics to improve the surface profile accuracy and productivity using a corrective polishing process. For the corrective polishing, a practical method of On-Machine Measurement (OMM) is required. For this purpose, an optical OMM system has been studied using the Shach-Hartmann test, which is very robust to the practical polishing environment. The wavefront has been reconstructed from the measured data using the primary aberration polynomial function by the least squares fitting. The measured result of the OMM system shows that the maximum deviation is less than 200 nm for the one of commercial Fizeau interferometer Wyko 6000.

• Transactions on Electrical and Electronic Materials
• /
• 제12권5호
• /
• pp.200-203
• /
• 2011

In this research, nitrogen (N)-doped zinc oxide (ZnO) thin films have been grown on a sapphire substrate by dielectric barrier discharge (DBD) in pulsed laser deposition (PLD). DBD has been used as an effective way for massive in-situ generation of N-plasma under conventional PLD process conditions. Low-temperature photoluminescence spectra of N-doped ZnO thin films provided near-band-edge emission after a thermal annealing process. The emission peak was resolved by Gaussian fitting and showed a dominant acceptor-bound excitation peak ($A^{\circ}X$) that indicated acceptor doping of ZnO with N. The acceptor binding energy of the N acceptor was estimated to be approximately 145 MeV based on the results of temperature-dependent photoluminescence (PL) measurements.

• 한국태양에너지학회 논문집
• /
• 제32권2호
• /
• pp.74-86
• /
• 2012

For the improvement of environmental comfort in the buildings with the blind control, the objective of this study is to prevent the direct glare caused by the daylight inlet. During the process of solar profile prediction, time are significant factors that may cause error and glare during the blind control. This research proposes and evaluates the correction and control method to minimize prediction error. For the local areas with different longitude and local standard meridian, error occurred in the process of the time conversion from local standard time to apparent solar time. In order to correct error in time conversion, apparent solar time should be recalculated after adjusting the day of year and the equation of time. To solve the problems by the potential time errors, control method is suggested to divide the control sections using the calibrated fitting-curve and this method is verified through simulations. The proposed correction and control method, which considered potential time errors by loop lop leap years, could solve the problems about direct glare caused by daylight inlet on the work-plane according to the prediction errors of solar profile. And also these methods could maximize daylight inlet and solar heat gain, because the blocked area on windows could be minimized.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.272-276
• /
• 2000

Reverse engineering refers to the process that creates a physical part from acquiring the surface data of an existing part using a scanning device. In recent years, as the non-contact type scanning devices become more popular, the huge amount of point data can be obtained with high speed. The point data handling process, therefore, becomes more important since the scan data need to be refined for the efficiency of subsequent tasks such as mesh generation and surface fitting. As one of point handling functions, the cross-sectioning function is still frequently used for extracting the necessary data from the point cloud. The commercial reverse engineering software supports cross-sectioning functions, however, these are only for cross-sectioning the point cloud with the constant spacing and direction. In this paper, adaptive cross-sectioning point cloud which allow the changes of the spacing and directions of cross-sections according to the constant spacing and direction. In this paper, adaptive cross-sectioning algorithms which allow the changes of the spacing and directions of cross-sections according to the curvature difference of the point cloud data are proposed.