• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1518-1527
• /
• 2023

A method was proposed for in-situ evaluating the thickness and resistivity of the oxide/hydroxide film formed on the surface of aluminum alloy exposed to sump water formed in the containment after a loss-of-coolant accident. The evaluation entailed fitting a model for the film impedance, which has film thickness and other variables describing the resistivity profile of the film along its thickness direction as fitting parameters, to the practically measured electrochemical impedance data. The obtained resistivity profiles implied that the films formed at pHs_25℃ 7, 8, 9, 10, and 11 all had a duplex structure; compared to the outer layer in contact with the solution, the inner layer of the film had a much higher resistivity and was inferred to be denser and provide most of the protectiveness of the film. Both the thickness and the total resistance of the film decreased with the increasing solution pH_25℃, suggesting that the films formed in more alkaline solutions had less protectiveness against corrosion, consistent with the increasing aluminum alloy corrosion rates previously identified.

• Journal of Computational Design and Engineering
• /
• v.1 no.3
• /
• pp.202-212
• /
• 2014

To survive in the current shipbuilding industry, it is of vital importance for shipyards to have the ship components' accuracy evaluated efficiently during most of the manufacturing steps. Evaluating components' accuracy by comparing each component's point cloud data scanned by laser scanners and the ship's design data formatted in CAD cannot be processed efficiently when (1) extract components from point cloud data include irregular obstacles endogenously, or when (2) registration of the two data sets have no clear direction setting. This paper presents reformative point cloud data processing methods to solve these problems. K-d tree construction of the point cloud data fastens a neighbor searching of each point. Region growing method performed on the neighbor points of the seed point extracts the continuous part of the component, while curved surface fitting and B-spline curved line fitting at the edge of the continuous part recognize the neighbor domains of the same component divided by obstacles' shadows. The ICP (Iterative Closest Point) algorithm conducts a registration of the two sets of data after the proper registration's direction is decided by principal component analysis. By experiments conducted at the shipyard, 200 curved shell plates are extracted from the scanned point cloud data, and registrations are conducted between them and the designed CAD data using the proposed methods for an accuracy evaluation. Results show that the methods proposed in this paper support the accuracy evaluation targeted point cloud data processing efficiently in practice.

• Fashion & Textile Research Journal
• /
• v.17 no.3
• /
• pp.429-439
• /
• 2015

This study develops a new brassiere for new silver women. A new brassiere design was developed for the silver generation based on apreliminary survey; subsequently, a wire and no-wire type of brassier were developed after a second fitting evaluation. The results were as follows. First, in terms of brassiere design, the cup shape was designed as mold type full cup, shoulder straps were designed as camisole type with cups, bias tape was designed for body correction in the side line and mash tape was designed for easy movement below the cups. On the other side ofthe cup shape was a pocketdesigned on a support pad forthe wire type and a support panel to serve as a wire in the no-wire type brassiere. Second, brassiere patterns were designed by referencing the educational H pattern. Thetotal length was elongated by 5cmto reduce pressure when wearing a brassiere and the height of the front center increased by 8cm for the stability of the front center of the brassiere. In addition, the side line was moved back by 3cm and the width of the brassiere wings was designed widely at 10.5cm. Third, a wearing test was conducted for the wire type and the no-wire type brassiere with comparison products, using a 7-point Likert scale. Appearance results and movement tests for the wire and no-wire type showed a higher score than comparison products.

• Journal of the Korean Home Economics Association
• /
• v.43 no.5 s.207
• /
• pp.235-248
• /
• 2005

The objective of the study was to design a Battle Dress Uniform(BDU with improved motional flexibility, body fit, and protectiveness to cope with the special operational environment of the subjects. For this purpose, the researcher conducted a questionnaire survey on 92 male members of Special Weapon Attack Team(SWAT units in a former study, and based on the results of the survey, made the two-piece and one- piece BDU samples to overcome the identified problems and inconveniences. The sample uniforms were designed ergonomically from five aspects. Subsequentlv, the new BDU was compared with the current operational uniform in terms of outward appearance(design and fit), motional flexibility, and suitability for field activities. The samples were evaluated by 5 SWAT members as subjects and 8 graduate school students majoring in clothing and textiles as experts. According to the results, the two-piece and one-piece samples gained higher scores than the existing operational uniform in terms of outward appearance(design and fitness) and motional flexibility, and the one-piece sample was preferred with regard to fit when worn by the subjects with their full kit for field operations. That is, the one-piece sample appeared to be more suited to the special work environment of SWAT and to be more functional in terms of ease of putting on and taking off, motional flexibility, body fit and protectiveness than the current operational uniform(two-piece type).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.4
• /
• pp.589-595
• /
• 2014

The error of instrument transformers is measured by connecting the external burden with the secondary terminal of the instrument transformers. Because the error of transformer is affected by the apparent power and power factor of the external burden, an accurate measurement of burden is important for transformer evaluation. We have developed the burden evaluation equipment for both potential transformer and current transformer by employing the series resistor in the range of $20m{\Omega}{\sim}5{\Omega}$ and the parallel resistor in the range of $1M{\Omega}{\sim}500{\Omega}$, respectively, together with visual basic program. We could reduce testing time more than 5 times by employing method developed in this study, compared with that developed in past. This method shows more better reliability by analyzing the evaluation results and fitting graphs of burden measurements. The test results of the developed system is compared with those obtained in the power meter analyzer to verify the validity.

• Journal of Power Electronics
• /
• v.17 no.2
• /
• pp.501-513
• /
• 2017

The fundamental small-signal modeling of lithium-ion (Li-ion) batteries and a parameter evaluation approach are investigated in this study to describe the dynamic behaviors of small signals accurately. The main contributions of the study are as follows. 1) The operational principle of the small signals of Li-ion batteries is revealed to prove that the sinusoidal voltage response of a Li-ion battery is a result of a sinusoidal current stimulation of an AC small signals. 2) Three small-signal measurement conditions, namely stability, causality, and linearity, are proved mathematically proven to ensure the validity of the frequency response of the experimental data. 3) Based on the internal structure and electrochemical operational mechanism of the battery, an AC small-signal model is established to depict its dynamic behaviors. 4) A classical least-squares curve fitting for experimental data, referred as Levy's method, are introduced and developed to identify small-signal model parameters. Experimental and simulation results show that the measured frequency response data fit well within reading accuracy of the simulated results; moreover, the small-signal parameters identified by Levy's method are remarkably close to the measured parameters. Although the fundamental and parameter evaluation approaches are discussed for Li-ion batteries, they are expected to be applicable for other batteries.

• The Research Journal of the Costume Culture
• /
• v.13 no.3 s.56
• /
• pp.414-424
• /
• 2005

This study was aimed to alter slacks pattern of ready-to-wear clothing appropriate for the lower body types of male university students of sports majors. The subjects used for this study were 151 male sports majors between $18{\sim}27$ years of age. Characteristics of the respondents were ascertained by means of questionnaires and an evaluation of a total of 36 lower body features. The characteristics of the lower body were depended on sport activities. In particular, bodybuilding students demonstrated a somatotype with an increased circumference, depth, and width of the thigh and lower body. The somatotypes were classified into 3 types by means of a cluster analysis employing 5 factors. The bodybuilding was selected for alter slacks pattern because of the grand variation of lower body types. A lining evaluation of slacks pattern was made for the male sports collegians in bodybuilding-major. The results of evaluation shows that the research pattern was better than a ready-made slacks pattern. Specially the hip and thigh parts were more comfortable to sports major students.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.7
• /
• pp.1004-1014
• /
• 2000

The purpose of this study was to develop a well-fitting bodice basic pattern for high school irk. Two bodice patterns were first made based on the most recent existing drafting methods and sensory evaluation was done on the patterns by the present researchers Two high school girls possessing standard physical condition tried and evaluated the functionality of the garments made by the two bodice patterns. Based on the results of the evaluation, a new bodice basic pattern was developed. The new bodice basic pattern was drafted by long measurement method. The dimensions of new bodice basic pattern were as follows. Bust circumference=B/2+4cm, Arms hole depth=C.B/2+1.5cm, Back width=B/6+4cm, Front width=B/6+3cm, Back neck width=B/12+0.5cm, Back neck depth=Back neck width/3cm, Front neck width=B/12cm, Front neck depth=B/12+0.5cm. The sensory and functional evaluations were also conducted for the new bodice basic pattern and the two patterns drafted by the existing methods. The new bodice basic pattern showed better fit both visually and functionally than the existing patterns. SPSS package including means, standard deviation and one-sample T-test were used for data analysis.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.183-186
• /
• 2007

Hyperspectral remote sensing data contain plenty of information about objects, which makes object classification more precise. Over the past several years, different algorithms for the classification of hyperspectral remote sensing images have been developed. In this study, we proposed method based on absorption band extraction and Gravity type model to solve hyperspectral image classification problem. In contrast to conventional methods that are based on correlation techniques, this method is simple and more effective. The proposed approach was tested to evaluate its effectiveness. The evaluation was done by comparing the results of preexiting SFF(Spectral Feature Fitting) classification method. The evaluation results showed the proposed approach has a good potential in the classification of hyperspectral images.

• Fashion & Textile Research Journal
• /
• v.2 no.4
• /
• pp.353-359
• /
• 2000

The purpose of this study was to develop the jacket pattern drafting method for Korean middle-aged women. The study was composed as follows : 1. Body measurement and statistical analysis : Two hundreds and forty four middle-aged women between the ages of forty five and fifty nine were measured on 52 items. 2. Development of new jacket pattern drafting method : Measurement items necessary to draft new jacket pattern were back waist length, bust girth, waist girth, hip girth, back interscye breadth, front interscye breadth, neck base girth, nipple length, nipple to nipple breadth, 1/2 posterior shoulder length and sleeve length. Basic jackets constructed from the experimental patterns were examined through the fitting test. 3. Evaluation of the new pattern drafting method : The sensory evaluations for appearance and comfort were applied to evaluate the new jacket pattern by comparing it with one of the conventional jacket patterns (Lee Hyung-Suk's). According to the result of sensory evaluation, the new jacket pattern was more positive.