• Journal of Convergence for Information Technology
• /
• v.9 no.1
• /
• pp.142-150
• /
• 2019

This study is a file management security system that encrypts and decrypts computer and cloud data by using Bluetooth based cryptographic module. It is a necessary solution in terms of abuse of personal information and protection of social and national information. We developed H/W and S/W for SFMS(: Safe File Management Security) related Bluetooth module in cloud environment and implemented firmware development, encryption key generation and issuance, client program for system mobile and key management system. In the terminal internal encryption and decryption, SFMS was developed to ensure high security that the hacking itself is not possible because key values exist separately for each file.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.1
• /
• pp.31-38
• /
• 2019

In this paper, we develop a beamforming front end platform with pipeline circuit configuration method that can apply various clinical diagnostic applications of ultrasound image technology. Hardware design targets compression applications as well as scalable applications where power, integration levels and replication possibilities are important. Firmware design was implemented to achieve optimal FPGA parallel processing level by constructing new IP and system-oriented design environment to accelerate design productivity with maximum productivity improvement using Vivado HLS tool, which is a next generation high level synthesis tool. Former supports the high-speed management function of scan data that can create an image area arbitrarily and can be appropriately corrected and supplemented when reconfiguring or changing system specifications in the future.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.1
• /
• pp.33-41
• /
• 2019

We propose an embedded solution to design a high-speed and high-accuracy 16bit analog-digital signal processing interface for the control systems using various external analog signals. Choosing TMS320F28377D micro controller unit (MCU) featuring high-performance processing in the 32-bit floating point operation, low power consumption, and various I/O device supports, we design and build the proposed system that supports both 16-bit analog-digital converter (ADC) interface and high precision digital-analog converter (DAC) interface. The ADC receives voltage-level differential signals from fully differential amplifiers, and the DAC communicates with MCU through 50 MHz bandwidth high-fast serial peripheral interface (SPI). We port the boot loader and device drivers to the implemented board, and construct the firmware development environment for the application programming. The performance of the entire implemented system is demonstrated by analog-digital signal processing tests, and is verified by comparing the test results with those of existing similar systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.10
• /
• pp.1249-1254
• /
• 2020

As the market for life friendly ICT (Information and Communication Technologies) services has grown up, high tech elevator with IoT (Internet of Things), a key area of the fourth industry, have become an indispensable part of life. Existing elevators are composed of up and down buttons to conveniently climb up and down high rise buildings, but there is a small inconvenience that everyone experiences depending on the characteristics of the user's composition, types of use, frequency, etc. Existing elevators are automatically closed if there are no people within the range of sensors, but they are inconvenient for the passengers with disabilities to carry luggage or to use. In this paper, the smart button, a hardware firmware device, was designed to relieve user inconvenience by opening the elevator for a certain period of time considering the boarding time of the passengers.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.4
• /
• pp.157-166
• /
• 2022

The most commonly used wireless communication technologies in IoT technology include ZigBee, WiFi, Bluetooth, and Z-Wave. In particular, Z-Wave is currently one of the preferred wireless communication technologies, with a global market share of 60 % of these technologies. In this research, a temperature and humidity sensor module using a Z-wave protocol was designed and manufactured by referring to the data sheet. Subsequently, the Z-Wave protocol was analyzed during the operation of the sensor module, and the firmware of the controller module was mounted and implemented. In addition, a program for monitoring the temperature and humidity information from the sensor module was developed and validated. Finally, the performance of the sensor module was validated through master distance and low power tests on it and its reception data success rate.

• Journal of Drive and Control
• /
• v.19 no.2
• /
• pp.17-26
• /
• 2022

Recently, automatic transmissions caused a good improvement in the shift quality of a forklift. An advanced shift control algorithm, which was based on TCU firmware, was applied with embedded control technology and microcontrollers. In the clutch-to-clutch shifting, one friction element is released and the other friction element is activated. During this process, if the release and application timings are not synchronized, an overrun or tie-up occurs and ultimately leads to a shift shock. The TCU, which measures only the speed of the forklift, inevitably applies the open-loop shift control. In this situation, the speed ratio does not change during the clutch fill. The torque phase occurs until the clutch is disengaged. In this study, an offline shift logic of the learning control was proposed. It induced a synchronous shift when the learning control progressed. During this process, the reference current trajectory of the release clutch was corrected and applied to the next upshift. We considered the results of the overrun/tie-up characteristics of the upshift performed immediately before. The vehicle test proved that the deviation in shift quality, which was caused by the difference in the mechanical characteristics of the clutch, could be improved by the learning control.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.2
• /
• pp.263-271
• /
• 1994

Automation of production in modern manufacturing is based on the integration of the various stage of production process by means of processing system. Information processing and network interface are of fundamental importance in programmable device in industrial automation, as they essential in order to active integration in production lines. In this paper, TBC(token bus controller) in the Mini-MAP board performs the function of the MAC sublayer, The LLC sublayer is implemented according to the specification of Class 3 that includes Type 1 and 3. And the MMS services are designed within the scope of implementation MAP 3.0 All the softwares are implemented under the real time executive for real time application of the Mini-MAP and they are loaded into PROMs at the network board. We tested the LLC functions to make use of a protocol analyzer for the token bus protocol. Also the MMS conformance test was carried out by exchanging primitives between a model system(including NIU) and a MMS product that had already passed the conformance the conformance test based on measurement method of network analysis.

• The KIPS Transactions:PartC
• /
• v.11C no.4
• /
• pp.539-544
• /
• 2004

This paper presents the implementation of the bluetooth headset and the audio gateway connected to the mobile Phone in the embedded environment. The bluetooth module includes the BC02 processor chip, the BCSP02 firmware and the bluelab software Including bluetooth protocol stack. The above components in the bluetooth module developed at CSR company are used as the development environment. The application program using API functions supported by bluelab is coded by C language and loaded on the flash ROM of the bluetooth module. The cail processing capacity measuring the call setup time and the clearing time between the audio gateway and the headset is considered as the performance parameter of the developed systems. As a call setup and clearing time between the audio gateway and the headset is about 88.8ms, the call processing capacity is about 11 calls per second. Therefore the performance result is satisfied in the aspect of the call processing time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.2
• /
• pp.184-190
• /
• 2014

Until now ship communication micro serial network communication method is designed for the communication between the controller and the RS-422 communication on the international standard ISO 1993, but gradually progresses NMEA 2000 standardized fast Ethernet-based communications environments expected to be replaced. In addition, the ship's main instrumentation equipment versatility with ease gradually to control devices by monitoring and controlling are. Wind anemometer, ship mast end, where the highest wind farms typically install a separate console boxes, data loggers, indicators was required in order to manage them, to maintain them, to go through the procedures and cumbersome data update firmware were Therefore, in this paper, using the PC network, ultrasonic wind speed data processing system for implementing functional was expressed as a function of the technology elements, NMEA 2000 standard certified in separate operating console without the features of the data loggers, indicators, implementation by ultrasonic wind data processing system was implemented to minimize the maintenance cost of the operating system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.6
• /
• pp.11-17
• /
• 2001

Design and implementation of the MAC protocol processor prototype for high speed wireless LAN, which has interface with 5GHz OFDM PHY layer, is presented. We analyze the IEEE 802.11 MAC protocol specification and then separate the MAC protocol functions to be implemented by hardware and firmware and define the interface in which frames can be exchanged. That is, it is considered that high speed queue processing and interfaces with RISC processor and OFDM PHY layer. Protocol control and transmission/reception functions of the MAC functions are implemented in hardware in order to guarantee high speed processing in MAC layer. The developed MAC hardware block operates at 10MHz main clock. Therefore, transmission rate in PHY layer is about 80Mbps because data transmission/reception between MAC layer and PHY layer is performed as unit of octet. The designed FPGA MAC function chip has been implemented in wireless LAN test board and it is verified that DCF function is operated correctly.