• 대한치과기공학회지
• /
• 제31권4호
• /
• pp.15-23
• /
• 2009

The aim of this study was to evaluate the bond strength of using a Au bonding agent applied on cp-Ti and nonprecious metal-gold-ceramic system. Metallic frameworks(diameter: 5mm, height: 20mm)(N=56, n=7per group) cast in Ni-Cr alloy, Co-Cr alloy and cp-Ti were obtained using acrylic templates and airborne particle abraded with $110{\mu}m$ aluminum oxide. Au bonding agent was applied on wash opaque firing as intermediate layer. SEM and SEM/EDS line profile were performed on the cutting the cross-section of the metal substrate-porcelain with intermediate Au coating. Groups were tested using shear bond strength(SBS) testing at 0.5mm/min. The mean SBS values for the ceramic-Au layer-metal combination were significantly higher than those ceramic-metal combination. While ceramic-Au layer-cp-Ti combinations failed to increase bond strength instead of using a titanium bonding porcelain. The appication of using Au intermediate layer significantly improve the bond strength combination with metal-ceramic system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1121-1126
• /
• 2003

Strength evaluation was carried out for the fillet and oil hole of crankshaft of medium speed diesel HiMSEN engine to verify initial concept design. Alternating torque obtained from torsional vibration analysis and radial force due to firing pressure were applied. It was assumed that the maximum alternating torque and radial force occur simultaneously. Weak points in view of fatigue are proceeding fillet and crank pin fillet area and the minimum normalized fatigue safety factor is 1.17 at crank pin fillet. The fatigue strength of the oil hole was evaluated to verify the effect of the surface roughness of the oil hole. As results, the specific level of the inner surface roughness and the polishing depth of the oil hole for sufficient fatigue strength was suggested. The maximum stress value and stress distribution at the inner surface of the oil hole can be easily estimated at initial design stage by the newly developed method.

• 한국재료학회지
• /
• 제9권2호
• /
• pp.181-187
• /
• 1999

In this study, the effect of residual stress on mechanical strength was investigated with 1 kind of whiteware body and 4 kinds of glazes which are produced in succeeding ceramic art place. Using dipping method, the body was coated for different times in order to manipulate the coating thickness and sintered in the different temperatures ($1200^{\circ}C$, $1250^{\circ}C$, $1300^{\circ}C$, $1350^{\circ}C$) for two thus hours. The sintered bodies were characterized by XRD, EPMA, FEM and UTM in order to study the forming of reaction layer between body and glazes, residual stresses and the effects of residual stresses on mechanical strength of pottery. At $1300{\circ}C$, we obtained maximum density and mechanical strength. By the finite element method, the residual stresses in surface of body were minimum in specific thickness of glazes and the mechanical strength of body in that thickness of glazes showed maximum when the firing temperature was settled.

• Structural Engineering and Mechanics
• /
• 제82권2호
• /
• pp.163-172
• /
• 2022

Zinc-rich epoxy (ZRE) is used to overcome corrosion problems in reinforced concrete (RC) beams and coat steel rebars to protect them from humidity and chlorides. An extra coating layer of Sikadur-31 epoxy (SDE) is utilised to increase bond strength because the use of ZRE reduces the bond strength between concrete and steel rebars. However, the low melting point of SDE indicates that concrete specimens are vulnerable to fire. An experimental investigation on flexural performance of RC beams incorporating ZRE-SDE coating of steel rebars that were destroyed by fire is performed in this study. Twenty beams of five concrete mixes with different cementitious contents were tested to compare fire exposure for coated and uncoated rebars of the same beams at room temperature and determine the optimal cementitious content. Scanning electron microscopy (SEM) was also applied to investigate characteristics of fired mixture samples. Results showed that the use of SDE-ZRE at room temperature improves flexural strengths of the five mixes compared with uncoated rebars with percentages ranging from 8.5% to 12.3%. All beams with SDE-ZRE lost approximately 50% of their flexural strength due to firing. Moreover, the mix incorporating SF (silica fume) of 15% and cement content of 400 kg/m³ introduces optimum behaviour compared with other mixes. All results were supported and verified by the SEM analysis and compressive strength of cubic specimens of the same mixes.

• 한국세라믹학회지
• /
• 제12권2호
• /
• pp.3-9
• /
• 1975

The continuous grading method of pyrophyllite particles was adopted to prepare the refractories for ladle. The optimum conditions of fabrication adjusting the binders, the amount of water, the forming pressure and the firing temperature were investigated. The various properties, such as strength, density, porosity, thermal shock, corrosion resistance to slag were measured and compared with properties of ladle bricks presently used at local steel plants. The specimen studied in the present investigation showed a rather superior properties to theconventional product available locally.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.725-730
• /
• 1998

Recently we extended the fuzzy model for rule based systems incorporating an importance factor for each rule. The model permits for both unrestricted as well as non-negative importance factors. We use this extended model to design a fuzzy rule based classifier system which uses both the firing strength of the rule and the importance factor to decide the class label. The effectiveness of the scheme is established using several data sets.

• 산업기술연구
• /
• 제5권
• /
• pp.15-20
• /
• 1985

The microstructure of sintered body of two component(kaolin-pottery stone) system after firing was examined with scanning electron microscope. At first the pottery stone was melted into glassy phase and the kaoline was decomposed to mullite and silica at higher temperature. The interlocked mullite crystals and silica surrounded by glassy phase are belived to increase strength.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2006년도 추계학술대회 학술발표 논문집 제16권 제2호
• /
• pp.7-10
• /
• 2006

지능형 디지털 재설계 기법의 중요한 가정은 퍼지 IF-THEN 규칙의 발화도가 샘플링 구간에서 샘플링 순간의 값으로 근사화 된다는 점이다. 본 논문은 퍼지 IF-THEN 규칙 발화도의 근사화 가정을 배제한 경우에 대하여 기존의 지능형 디지털 재설계 기법에 의하여 재설계된 디지털 제어기의 안정화 가능성을 조사한다.

• Journal of the Korean Physical Society
• /
• 제73권9호
• /
• pp.1385-1392
• /
• 2018

A network with coupled biological neurons provides various forms of collective synchronous dynamics. Such phase-locking dynamics states resemble eigenvectors in a linear coupling system in that the forms are determined by the symmetry of the coupling strengths. However, the states behave as attractors in a nonlinear dynamics system. We here study the collective synchronous dynamics in a neural system by using a novel theory. We exhibit how the period and the stability of individual phase-locking dynamics states are determined by the characteristics of synaptic couplings. We find that, contrary to common sense, the firing rate of a synchronized state decreases with increasing synaptic coupling strength.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제13권1호
• /
• pp.60-66
• /
• 2008

본 연구에서는 실제 납 탄알로 오염된 사격장 토양에 대해 토양세척기법을 적용하기위한 lab-scale 실험을 수행하였으며 다음과 같은 결론을 얻을 수 있었다. 토양오염공정시험법과 EPA Method 3050B 분석결과 각각 4,803.5 mg/kg, 9,443 mg/kg으로 나타났다. 회분식 토양세척 실험에서 HCl을 세척제로 사용한 경우 농도증가에 따른 제거율은 로그적인(logarithmic) 경향을 나타내었고 0.1M에서 약 90% 정도 제거되었으며, EDTA는 농도에 비례하여 제거율도 증가하여 0.1 M에서 약 98%의 제거율을 보였다. 교반강도에 따른 시간별 세척효율을 분석한 결과, HCl과 EDTA를 사용한 경우 모두 교반강도의 증가와 비례하여 토양내 제거율이 증가하였으나 200 rpm과 300 rpm에서의 제거율은 유사한 것으로 나타났으며, 반응 초기 10분 이내에 대부분의 용출이 이뤄지고 60분 경과 후에는 제거율 증가가 둔화되었다.