Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지

Characteristics of Pyrophyllite Aggregate fired at Low Temperature(II)

저온소성 납석질 벽돌의 특성에 관한 연구(저온소성 ladle용 벽돌의 개발연구 제이보)

  • 지응업 (인하대학교 요업공학과) ;
  • 한기성 (인하대학교 요업공학과) ;
  • 최상욱 (인하대학교 요업공학과)
  • Published : 1975.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

The continuous grading method of pyrophyllite particles was adopted to prepare the refractories for ladle. The optimum conditions of fabrication adjusting the binders, the amount of water, the forming pressure and the firing temperature were investigated. The various properties, such as strength, density, porosity, thermal shock, corrosion resistance to slag were measured and compared with properties of ladle bricks presently used at local steel plants. The specimen studied in the present investigation showed a rather superior properties to theconventional product available locally.

Keywords

References

  1. 窯業會誌 v.3 no.1 東萊蠟石과 造塊用耐火物 金琪一
  2. 耐火物 v.24 no.7 Sand slinger에 依한 取鍋築造에 대하여 田中英雄
  3. Trans. Brit. Cer. Soc. v.71 no.5 Lining teeming ladles by sand slinging S.H. Short
  4. 耐火物 v.25 no.7 sand slinger 施工取鍋의 試驗結果(1) 浜本不二未(et al.)
  5. 耐火物 Sand slinger process에 의한 取鍋 lining에 대하여 谷哲郎(et al.)
  6. 耐火物 Sand slinger process에 의한 取鍋 lining에 대하여 大西穗泰(et al.)
  7. 耐火物 v.26 no.2 Slinger process에 의한 取鍋 lining 木村守弘
  8. 耐火物 v.15 no.11 cupola用 酸性耐火物의 侵飾機 에 關한 考察 牧口利貞(et al.)
  9. 播磨耐火技報 v.25 no.9 高珪酸質原料와 基本特性에 대하여 涓石直幸;吉野一
  10. 播磨耐火技報 v.25 no.8 低溫燒成取鍋煉瓦의 使用結果 廣本健
  11. 窯業會誌 v.10 no.3 蠟石粉碎物의 充塡에 關한 硏究 池應業;韓基成;崔相旭
  12. Refractories 4ed. pouring pit refractories F.H. Norton
  13. 耐火物工學 取鍋練瓦 吉木文平
  14. Trans. Brit. Cer. Soc. v.57 Assesment of ladle fire brick quality and performance Workman G.M.
  15. J. Am. Cer. Soc. Bull. v.32 no.3 Quality control of ladle brick J.A. Roslund
  16. Trans. Brit. Cer. Soc. v.61 The wear of refractories in steel ladles Savioli, F.
  17. Brit. Patent 907007 Lining reparing equipment Bloch J.