• Journal of the Korea Safety Management & Science
• /
• v.23 no.4
• /
• pp.23-29
• /
• 2021

The purpose of this study is to reduce the probability of occurrence of electric fires as a preemptive preventive measure, and to strengthen the capability of preventing electric fires by strengthening the cooperative function between electric fire-related departments and establishing a cooperative system. In this study, the general aspects of electric fires were identified by reviewing the literature such as ignition mechanisms of electric fires. And the major electrical fires that occurred in the last 10 years were classified into ignition factors (short circuit, overload/overcurrent, and earth leakage/ground fault) and ignition sources (wiring/wiring appliances, electrical equipment/household appliances). And the 4M technique was used to analyze the potential causes of ignition at the fire site and to suggest preventive measures. In the case In this study, out of 48 electrical fires in the past 10 years, 16 short-circuit fires, 3 overload/overcurrent fires, 3 short-circuit and earth fault fires, 16 fires in wiring/wiring appliances, and 10 fires in electrical equipment/home appliances classified as cases. And prevention measures were presented in terms of human, machine, media, and management by using the 4M technique. For the preemptive prevention of electric fires, strengthening the compulsory electrical safety inspection and making it mandatory to report when new or expanding electric facilities, charging a fee for electric safety inspection for detached houses and granting benefits subject to inspection completion, improvement of the electric safety voluntary inspection table and safety indications; It was suggested as a policy to organize and operate electrical safety inspection personnel in a two-person team (mixed), establish a close work cooperation system with related organizations, and strengthen electrical safety education and publicity.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.4_1
• /
• pp.735-740
• /
• 2024

Data released by the National Fire Agency showed that the total incidence of fires from 2014 to 2023 was 410,497, among which 75,215 were house fires, constituting 18% of the total occurrences. The fatalities resulting from house fires numbered 1,435. Fatalities stemming from prior house fires occurred between midnight and 6 am, coinciding with periods of sleep and diminished responsiveness to fire emergencies. A fire safety labeling system is proposed to prevent fire hazards associated with household products. This system primarily entails indicators of thermal energy and inherent fire attributed to household products. Furthermore, the Korea Fire Safety Institute has suggested adopting a risk label as a concrete measure plan for implementing the fire safety labeling system for household products. The results promise to safeguard the public against fires and increase the exports of household commodities by enhancing the corporate reputation through positive association with fire safety measures.

• International Journal of Safety
• /
• v.6 no.2
• /
• pp.17-21
• /
• 2007

This paper aims at the statistical analysis of electrical fire and classification of electrical fire causes to collect electrical fires data efficiently. Electrical fire statistics are produced to monitor the number and characteristics of fires attended by fire fighters, including the causes and effects of fire so that action can be taken to reduce the human and financial cost of fire. Electrical fires make up the majority of fires in Korea(including nearly 30% of total fires according to recent figures), The incorrect and biased knowledge for electrical fires changed the classification of certain types of fires, from non-electrical to electrical. It is convenient and required to develop the standardized form that makes, in the assessment of the cause of electrical fires, the fire fighters directly ticking the appropriate box on the fire report form or making an assessment of a text description. Therefore, it is highly recommended to develop electrical fire cause classification and electrical fire assessment on the fire statistics in order to categorize and assess electrical fires exactly. In this paper newly developed electrical fire cause classification structure, which is well-defined hierarchical structure so that there are not any relationship or overlap between cause categories, is suggested. Also fire statistics systems of foreign countries are introduced and compared.

• Journal of the Korean Society of Safety
• /
• v.7 no.3
• /
• pp.89-98
• /
• 1992

In this study, the methods to identify the causes of electrical fires are suggested. Among several causes of electrocal fires, it is focused upon a short-circuit and an over-current accidents, which take the highest ratio compare with any other causes. To propose the exact method of identification, electric wires(HIV, IV), fuses and plug-receptacls are tested under the conditions of electrical accidents and external fires, respectively. By analyzing the microphotographs, the differences between the results from electrical fires and the others are found out.

• Proceedings of the KIEE Conference
• /
• 2009.04a
• /
• pp.205-207
• /
• 2009

In 2007, 9,128 fires are attributed to electrical equipments. These fires resulted in 29 deaths and 262 injuries. Arc-faults were one of the major causes of these fires. When an unintended arc-fault occurs, it generates intense heat that can easily ignite surrounding combustibles. Conventional circuit breakers only respond to overloads, short circuits, and leakage currents. Therefore, the breakers do not protect against arcing conditions. This paper presents results obtained in experiments on ignition behavior of wire by series arc fault currents and techniques developed to detect the arc-faults. The developed technique was tested after installation to make sure they are working properly and protecting the circuit. If the developed arc detecting technique is applied, the electrical fires caused by an arc-fault can be reduced.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.6
• /
• pp.82-87
• /
• 2013

Electrical leakage happens when faults in electrical apparatus or power lines occur. It causes electrical fires and electric shocks. In order to reduce accidents caused by electrical leakage current, it is important to detect faults effectively and shut off the power. In this paper, firstly we analyzed statistics of electrical fires and electric shocks caused by electrical leakage current. Secondly, standards of allowable leakage current and body impedance models were analyzed. Lastly, effective application methods for breaking electrical leakage current were suggested. The results will provide useful preventive measures of electrical fires and electric shocks caused by electrical leakage.

• Journal of the Society of Disaster Information
• /
• v.20 no.1
• /
• pp.32-39
• /
• 2024

Purpose and Method: This study aims to suggest institutional improvements to enhance the response to electric vehicle fires. To this end, we examined the prevalence of electric vehicles, fires, and related legal systems in Seoul. Results: The top-level laws and ordinances related to electric vehicles are centered on distribution policies, so there is no practical fire response plan for electric vehicle fires. In order to apply the same regulations to each local government, it is necessary to set standards and establish a system for firefighting and safety facilities in higher laws. Conclusion: Establishing standards for the installation of fire and safety facilities that take into account the characteristics of electric vehicle fires and improving related systems will ultimately lead to an increase in the penetration rate of electric vehicles.

• Journal of the Korea Safety Management & Science
• /
• v.26 no.3
• /
• pp.83-92
• /
• 2024

In recent years, the number of cases caused by people such as forest fires has been increasing, so it is very important for the whole nation to prevent and practice forest fires. In addition, due to climate change around the world, many lives and disaster losses are increasing due to forest fire-related disasters, and in the last 10 years (2014-2023), there have been 5,668 forest fires and 40,037 hectares of damage, which is equivalent to 56,000 football fields, resulting in 19 casualties and 285.4 billion won in damages. Now, in order to improve the understanding and awareness of forest fires among all the people, the government should actively inform the people about how to act in the event of a forest fire by making the people's action tips related to forest fires easy to understand and practical through public relations activities. In addition, the public and the government should work together to prevent and prepare for forest fires before they occur.

• International Journal of Safety
• /
• v.4 no.2
• /
• pp.12-17
• /
• 2005

This paper aims at the development of an knowledge base for an electrical fire cause diagnosis system using the entity relation database. The relation database which provides a very simple but powerful way of representing data is widely used. The system focused on database construction and cause diagnosis can diagnose the causes of electrical fires easily and efficiently. In order to store and access to the information concerned with electrical fires, the key index items which identify electrical fires uniquely are derived out. The knowledge base consists of a case base which contains information from the past fires and a rule base with rules from expertise. To implement the knowledge base, Access 2000, one of DB development tools under windows environment and Visual Basic 6.0 are used as a DB building tool. For the reasoning technique, a mixed reasoning approach of a case based inference and a rule based inference has been adopted. Knowledge-based reasoning could present the cause of a newly occurred fire to be diagnosed by searching the knowledge base for reasonable matching. The knowledge-based database has not only searching functions with multiple attributes by using the collected various information(such as fire evidence, structure, and weather of a fire scene), but also more improved diagnosis functions which can be easily wed for the electrical fire cause diagnosis system.

• Journal of the Korean Society of Safety
• /
• v.19 no.3 s.67
• /
• pp.9-13
• /
• 2004

To confirm the previous finding that FDS predicts a fire growth rate too rapid compared with an experiment in a center fire in a room with an opening, the same computational fluid dynamics was applied to two types of fires, wall fire and comer fire. First the grid size was chosen to eliminate possible numerical errors due to a coarse grid system. Then the two types of fires were simulated for three different fire sizes, 7.65, 21.25, and 51.57kW for each type, which are the same as in the experiment to be compared with. The fires were predicted to grow too fist although the average temperatures and heights of the neutral planes were in good agreement with measurement.