• 한국화재소방학회논문지
• /
• 제24권3호
• /
• pp.72-77
• /
• 2010

허니컴 코아 구조는 강성과 강도가 뛰어나 건축물의 내장재 등 많은 분야에서 활용되고 있다. 특히 허니컴 종이는 생산 단가가 낮으며 재활용이 가능하여 환경오염을 일으키지 않는다. 그러나, 종이 재료의 특성상 화재에 취약하여 난연화 할 필요가 있다. 본 연구에서는 방화문 내장재 및 포장재에 보편적으로 사용되는 허니컴 종이의 난연 처리 방법에 따른 난연 성능을 평가하였다. 연구 대상으로는 난연종이로 제작된 허니컴과 실험실에서 제작된 방염 필름을 부착한 허니컴, 난연제 함침을 통해 제작된 허니컴, 난연제 함침 후 방염 필름을 부착한 허니컴을 포함해 총 4종에 관한 난연 성능을 비교하였다. 그 결과, 난연제를 함침한 허니컴 종이가 가장 우수한 난연 능력을 보여주었으며, 방염 필름은 착화 시간 지연에는 효과가 있었으나 열방출률 및 연기발생률에 부정적인 영향을 미치는 것으로 확인되었다.

• 대한안전경영과학회지
• /
• 제14권2호
• /
• pp.65-70
• /
• 2012

This study was performed to test the combustive properties of the pipe insulation materials which are mainly used in the industries and buildings. Fire characteristic test of pipe insulation film according to the KS F ISO 5660-1 was performed. The experimental materials commonly used in the pipe insulation were used four kinds of films. Two kinds of 4 types of products that have the flame retardant performance and the other two types of them have no flame retardant performance. They were selected for fire characteristic test. The result of finding 25kW/$m^2$ radiation from the ignition was that flame retardant products were 140sec and the other one were 69sec in average of heat release rate(HRR). The result of flame retardant products in the 50kW/$m^2$ was 34sec and the other one were 15sec in average of HRR. However, the HRR of flame retardant products was much higher than the other one. Flame propagation test was conducted according to the KOFEIS 1001. The result of flame retardant products was that flame retardant products had a hold without fire spread after firing them. But the other one were completely fired after firing them. Therefore, I want to recommend that flame retardant products need to be used by the regulation to prevent or decrease a fire spread.

• 패션비즈니스
• /
• 제24권3호
• /
• pp.30-39
• /
• 2020

This study was conducted to identify problems in domestic flame-retardant performance specifications. Currently, the domestic wallcovering anti-inflammatory regulations are not prepared for damage caused by smoke, with the carbonized area as the main function. In particular, given that smoke is the main cause of human casualties and injuries in a fire, it is reasonable that the flame density and toxicity of the wallcovering should also be the main performance indicators. The scope and method of research in this study were as follows. First, a prior study related to fire on various wallcoverings was considered. Second, it raised questions about the effects of smoke in the event of a fire and domestic anti-inflammatory performance tests. Third, textile wallcovering samples were manufactured with viscose rayon for experimental verification of the problems and tested by Korean and EU standards without flame retardant processing to analyze the differences between each regulation. Fourth, the performance of flame retardant wallcovering according to Korean standards was evaluated using smoke density and harmful gas testing methods. The results of each test were as follows. Non-fire retardant wallcovering was rejected by Korea standards. However, B-s1.d0 in Europe. Smoke density testing and harmful gas by domestic combustion processing on the same sample showed that the smoke density increased about 4.3 times more than before, and the harmful gas test showed that the suspension of the post-processing sample slowed earlier than the non-processed sample.

• Elastomers and Composites
• /
• 제54권2호
• /
• pp.118-122
• /
• 2019

Four different polymer compounds were manufactured to make cable sheaths for the shipping industry. Two kinds of ethylene vinyl acetate (EVA) as the main matrix polymers and EVA-grafted maleic anhydride (EVA-g-MAH) as the coupling agent were selected for compounding with fire retardant, crosslinking agent, filler, plasticizer, and other additives. The properties of the four compounded materials were investigated with different contents of the fire retardant, silanecoated magnesium dihydroxide (S-MDH). In the rheology evaluation, the $t_{60}$ and ${\Delta}T$ values increased with increasing S-MDH contents. On the other hand, the tensile strength decreased with increasing S-MDH content due to a relative decrease in binder polymers. With increasing S-MDH content, fire resistance increased, but cold resistance showed no obvious enhancement due to the polar effect of vinyl acetate in EVA.

• Journal of the Korean Wood Science and Technology
• /
• 제40권5호
• /
• pp.335-342
• /
• 2012

To prepare the eco-friendly fire retardant wood, Japanese red pine (Pinus densiflora), Hemlock (Tsuga heterophylla), and Radiata pine (Pinus radiata) were treated with inorganic chemicals, such as sodium silicate, boric acid, ammonium phosphate, and ammonium borate. Different combination and concentration of those chemicals were impregnated by vacuum/pressure treatment methods. The electron-beam treatment was used to increase the chemical penetration into the wood. The fire performance of the fire retardant treated wood was investigated. The penetration of chemicals into the wood was enhanced after electron beam treatment. Ignition time of the treated wood was the most effectively retarded by sodium silicate, ammonium phosphate, and ammonium borate. The most effective chemical combination was found at 50% sodium silicate and 3% ammonium borate, which satisfied flammability criteria for a fire retardant material in the KS F ISO 5660-1 standards.

• 한국안전학회지
• /
• 제32권3호
• /
• pp.28-33
• /
• 2017

In this study, the composite material of expandable graphite was made to the material development for improving such as a composite material of the sandwich panels or material properties of a fire door and was tested by the ISO 1182, ISO 5660-1(Cone calorimeter Method). For the test, the composite material of expandable graphite, what the expandable graphite ratio was increased by respectively 0g~30g, was classified A1,A2, A3, A4, and made to the test specimens. Through cone calorimeter test, peak heat release rate(HRR) and total heat release(THR), expanded thickness and expansion rate of each composite material of expandable graphite, and fire prone crack and mass loss rate after burning was measured. Thus, the effect of the addition of the expandable graphite and whether is suitable for reference as a fire retardant, was analyzed. Consequently the correlation of THR and fire retardant performance rate was confirmed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권9호
• /
• pp.1150-1155
• /
• 2014

강화플라스틱(FRP) 선박은 화재 시 화염확산을 막기 위하여 관련 구조 기준에 따라 기관실 주위 벽 내부를 난연성 수지로 3회 이상 적층하거나, 이와 동등한 방열재로 둘러싸야한다. 관련 난연성 적층용 수지 및 일부 난연재료(연질폴리우레탄복합체)의 경우 선박용 물건의 형식승인 시험기준에 따라 그 성능을 평가할 수 있으나, 방열재로 빈번하게 사용되고 있는 '겔코트'에 대한 성능기준은 명확하지 않은 실정으로 난연성 수지와 화재안전성능이 비교 평가된 바 없다. 본 연구에서는 FRP 선박을 건조하는 조선소를 대상으로 설문조사를 실시하여 사용 중인 난연성 수지 3종, 겔코트 4종, 방염도료 1종 및 폴리우레탄 복합재 1종에 대해 화염전파시험과 방염성능시험을 적용하여 그 성능을 비교하였다. 화염전파시험 결과 임계열유속(CFE) 기준으로 각 종별 평균값을 비교하면 폴리우레탄 복합재, 난연성 수지, 방염도료, 겔코트 순으로 양호한 것으로 나왔고, 겔코트는 3회 도포한 것이 6회 도포한 것보다 양호한 결과를 보였다. 방염성능시험 결과 탄화면적 기준으로 각 종별 평균값을 비교하면 방염도료가 가장 좋게 나왔고 난연성 수지와 겔코트는 유사한 수준으로 나타났다.

• 한국화재소방학회논문지
• /
• 제31권3호
• /
• pp.11-18
• /
• 2017

본 연구에서는 건축물 내에 사용되는 실내장식물의 가연성으로 인해 화재 시 발생하는 연기로 인한 인명피해를 사전에 예방하기 위해 무기물의 실리케이트와 유기물의 실란커플링제를 졸-겔법으로 합성하여 방염성을 부여할 수 있는 비할로겐 방식의 유-무기 하이브리드 방염제졸을 새롭게 제조하였다. 제조된 방염제졸의 성능확인을 위해 방염성능기준에 의거한 연기밀도 측정기준인 ASTM E 662의 시험장치 및 절차에 따라 훈소모드 실험 및 불꽃모드 실험을 진행하여 성능을 확인하였다. 결과적으로 제조된 방염제졸은 기존의 방염제의 물성과 내열성능을 높여 화재 시 연기발생량을 감소시킬 수 있기 때문에 향후 다양한 실내장식물에서도 확대적용 함으로써 연기에 의한 피해에 있어 긍정적인 효과를 발휘할 것으로 생각된다.

• Earthquakes and Structures
• /
• 제22권2호
• /
• pp.137-145
• /
• 2022

As steel is highly sensitive to temperature variations, fire exposure is more destructive in the case of steel structures in comparison to the concrete ones. The performance of an intermediate three-story steel moment frame with 4 spans was studied under the service load, thermal load and post-earthquake fire in this paper. Also, the effects of passive fire-protection materials such as ordinary cement-based and fire-retardant coatings were investigated. To model and analyze the structure; Abaqus software is utilized. In order to apply the earthquake effect, the push-over analysis method is employed. Changes in the stories deflection, endurance time and growth of nonlinear regions due to losses in the steel stiffness and strength, are among the issues considered in this study. As an interesting finding, the beams protected by ordinary cement-based coating could sustain the fire exposure at least for 30 minutes in all cases. The mentioned time is increased by employing a new fire-retardant protection, which could prevent significant loss in the structure resistance against fire, even after 60 minutes of exposure to fire.

• 한국화재소방학회논문지
• /
• 제25권5호
• /
• pp.1-7
• /
• 2011

본 연구에서는 한옥의 주요 부재에 대한 난연기술 개발 및 성능향상을 위한 기초단계로 미국, 일본, 유럽 및 국내의 건축물 마감재의 난연성능 관련 법규 및 시험기준 등을 비교 분석하여 각 부재의 난연성능 평가기준을 제시하고자 하였다. 미국의 경우 최근 통합되어 사용 중인 IBC(International Building Code) 및 NFPA(National Fire Protection Association) Code가 적용되고 있으며, 평가항목으로는 바닥재에 대해서는 임계열유속을, 천장 및 벽체에 대해서는 화염확산지수 및 연기발생량을 적용하고 있다. 유럽의 경우 통합된 Euroclass가 적용되고 있는데 바닥재와 비바닥재를 구분하여 난연성능 등급별로 불연성시험, 화염 전파성시험, 소규모실물화재시험, 발열량시험 등을 평가항목으로 두고 있다. 일본의 경우는 우리나라의 체계와 유사하였는데, 이들 각국의 기준을 비교분석하여 목조물인 한옥 부재에 적용할 수 있는 정량적인 난연성능 평가방법에 대해 고찰해 보았다.