• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.593-596
• /
• 1999

This paper presents a process optimization of antireflectiun (AR) coating on crystalline Si solar cells. Theoretical and experimental investigations were performed on a doble-layer AR(DLAR) coating of MgF$_2$/CeO$_2$, We investigated CeO$_2$ films as an All layer because they hale a proper refractive index of 2.46 and demonstrate the same lattice constant as Si substrate. RF sputter grown CeO$_2$ film showed strong dependence on a deposition temperature. The CeO$_2$ film deposited at 400 $^{\circ}C$ exhibited a strong (111) preferred orientation and the lowest surface roughness of 6.87 $\AA$. Refractive index of MgF$_2$ film was measured as 1.386 for the most of growth temperature. An optimized DLAR coating showed a reflectance as low as 2.04 % in the wavelengths ranged from 0.4 7m to 1.1 7m. We achieved the efficiencies of solar cells greater than 15% with 3.12 % improvement with DLAR coatings . Further details on MgF$_2$, CeO$_2$ films, and cell fabrication Parameters are presented in this paper.

• 한국안전학회지
• /
• 제27권6호
• /
• pp.20-25
• /
• 2012

Currently, the most important purpose in designing automobile is environment-friendly and safety performance aspect. CFRP(Carbon Fiber Reinforced Plastics) of the advanced composite materials as structure materials for vehicles, has a wide application in lightweight structural materials of air planes, ships and automobiles because of high strength and stiffness. In this study, experimental investigations are carried out for CFRP single and double hat shaped section member in order to study the effect of various stacking condition. They were cured by heating to the appropriate curing temperature($130^{\circ}C$) by means of a heater at the vacuum bag of the autoclave. The stacking conditions were selected to investigate the effect of the interface numbers. The CFRP single and double hat shaped section members which manufactured from unidirectional prepreg sheets were made of 8ply. The static collapse tests performed and the collapse mode and energy absorption capability were analyzed according to interface number.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1337-1345
• /
• 2018

The reliability of power transmission and distribution depends up on the consistency of insulation in the high voltage power transformer. In recent times, considering the drawbacks of conventional mineral oils such as poor biodegradability and poor fire safety level, several research works are being carried out on natural ester based nanofluids. Earlier research works show that sunflower oil has similar dielectric characteristics compared with mineral oil. BIOTEMP oil which is now commercially available in the market for transformers is based on sunflower oil. Addition of nanofillers in the base oil improves the dielectric characteristics of liquid insulation. Only few results are available in the literature about the insulation characteristics of nano modified natural esters. Hence understanding the influence of addition of nanofillers in the dielectric properties of sunflower oil and collecting the database is important. Considering these facts, present work contributes to investigate the important characteristics such as partial discharge, lightning impulse, breakdown strength, tandelta, volume resistivity, viscosity and thermal characteristics of $SiO_2$ nano modified sunflower oil with different wt% concentration of nano filler material varied from 0.01wt% to 0.1wt%. From the obtained results, nano modified sunflower oil shows better performance than virgin sunflower oil and hence it may be a suitable candidate for power transformer applications.

• 한국산업보건학회지
• /
• 제29권4호
• /
• pp.477-487
• /
• 2019

목적: 소방관들은 각종 화재현장에서 다양한 유해화학물질에 노출된다고 알려져 왔다. 하지만, 이러한 소방활동이 이루어지는 동안 유해화학물질에 대한 노출이 어떤 형태로 되는 지, 노출되는 농도는 어느 정도인지 등에 대한 구체적인 연구나 조사는 거의 전무하다시피 한 상황이다. 따라서 이 연구의 목적은 첫째, 화재현장에서 소방관들이 개인적으로 노출되는 유해화학물질을 정성적, 정량적으로 모니터링하고 둘째, 각 화학물질의 농도가 소방업무와 어떠한 연관성이 있는 지 비교함과 동시에, 마지막으로 화학물질의 농도에 영향을 미치는 주요한 인자가 무엇인지에 대해서 평가하고자 하였다. 방법: 2013년 1월에서 4월까지의 기간 중 임의로 4주를 정하여 어느 화재현장을 대상으로 시료채취를 수행했고 이 때 소방관들의 직무나 화재현장의 특성, 즉 상황이나 규모 등을 함께 기록하였다. 취합된 시료는 세 가지 직무, 즉 화재진압, 오버홀 및 화재조사 등을 기준으로 분류되어 분석실로 보내어졌고 각 화학물질에 적합한 방법으로 분석되었다. 결과: 총 14건의 소방활동, 즉 화재진압 5건, 오버홀 6건, 화재조사 3건이 조사대상이었다. 채취된 모든 시료에서 벤젠을 제외하고 ACGIH-TLV를 초과한 화학물질은 없었지만, 발암물질인 PAHs의 경우는 모든 시료에서 한 종류 이상이 검출되었다. 이중 나프탈렌은 0.24~279.13 mg/㎥ (중위값 49.6 mg/㎥)의 범위로 검출되었고, 벤조피렌은 한 건의 오버홀 직무에서 10.85 ㎍/㎥가 검출되었다. 벤젠(0.01~12.2 ppm)은 모든 직무에서 검출되었으며 한 개의 시료에서 ACGIH-TLV를 초과하기도 했으나 직무간 농도를 비교했을 때에 유의한 차이는 없었다. 결론: 이상의 결과는 여러 가지 한계가 있기는 하지만, 소방활동을 수행할 때 낮은 농도에 불과할지라도 발암물질을 포함하여 인체에 유해한 영향을 줄 수 있는 연소생성물이 발생한다는 것을 보여주고 있다. 향후, 소방업무를 수행하는 사람들이 직무를 수행할 때 노출되는 유해화학물질에 대한 보다 폭넓은 연구가 수행되어 이들의 건강을 보호하기 위한 명확한 근거 자료로써 활용할 수 있어야겠다.

• 한국산림과학회지
• /
• 제10권1호
• /
• pp.29-39
• /
• 1970

산화(山火)는 임업(林業)에 있어서 일시적(一時的)으로 장구(長久)한 시일(時日)에 육성(育成)된 삼림(森林)을 순간적으로 황폐시킴으로 임업경영(林業經營)에 있어서 중대(重大)한 문제가 아닐 수 없으며 국가적(國家的)으로도 막대(莫大)한 손실(損失)을 갖어오는 것이다. 이러한 중대(重大)한 문제를 해결(解決)하기 위하여 선진국가(先進國家)에서는 다각도(多角度)로 문제점이 연구(硏究)되고 있으나 산화후(山火後)에 자연상태(瓷硯狀態)에서 생태학적(生態學的)인 연구(硏究)는 극히 짧은 역사(歷史)를 가지고 있으며 우리 나라에서는 이 방면(方面)의 연구(硏究)가 이제 시작이 되어 본인(本人)은 1967년(年)부터 강원도(江原道) 춘성군(春城郡) 서면(西面) 덕두원(德斗院)에 소재(所在)한 삼악산(三岳山)에 약(約)5ha의 면적(面積)이 산화(山火)로 인(因)하여 불탄 장소(場所)를 택(擇)하여 산화후(山火後)의 잔여종자(殘餘種子)의 발아율(發芽率)에 대한 조사시험(調査試驗)을 다음과 같이 연구(硏究)하였다. 1. 종자수(種子數)에 있어서 비교구(比較區) 740개(個)에 비(比)하여 시험구(試驗區)는 537개(個)의 차이(差異)를 가져온 것은 Quadrat를 설치(設置)한 위치(位置)의 차(差)도 다소(多少) 있으리라 믿으나 주(主)된 원인(原因)은 산화(山火)로 인(因)하여 일부(一部) 종자(種子)는 소각(燒却)된 것으로 생각되며 발아(發芽)의 비(比)는 208개(個);17개(個)로서 28.1%;3.2%로서 약(約)25%의 차(差)를 나타내고 있어 약(約)1/9이 감소(減少)된 것으로 보아 이 원인(原因)은 종자(種子)의 소각(燒却)과 상부(上部)의 고열(高熱)로 인(因)한 발아능력(發芽能力)을 상실(喪失)한 종자(種子)가 많은 것으로 생각된다(표(表)3. 4. 5) 2. Alnus japonica 종자수(種子數)는 시험구(試驗區)에서 16개(個)인데 발아율(發芽率)은 6개체(個體)(지수(指數)100)로서 가장 많은 발아율(發芽率)을 나타낸 것으로 보아서 열(熱)이 $150^{\circ}C$ 이상(以上)에서는 발아율(發芽率)을 저하(低下)시킨 것으로 생각된다(Fig. 7. 8. 9. 10. 11) 그리고 Carex Lanceolata var. Nana종(種)은 상부(上部)보다 하부(下部)의 종자수(種子數)가 많은 것은 하부(下部)(Quadrat 1. 2)의 식생군도(植生群度)가 많고 상부(上部)는 관목림(灌木林)인 관계(關係)로 Forest floor plants가 적은데 원인(原因)이 있는 것으로 본다(Fig. 9) 뿐만아니라 소형(小形)의 종자(種子)이기 때문에 토양입자(土壤粒子) 또는 자갈 속에 묻혀 불의 영향을 별(別)로 받지 않은 원인(原因)도 있는 것으로 본다. 3. Pinus densiflora의 종자(種子)는 비교구(比較區)에서는 43개(個)에서 11개(個)가 발아(發芽)되었는데 시험구(試驗區)에서는 11개중(個中) 하나도 발아(發芽)되지 않은 것으로 보아 Pinus densiflora는 차조사지(此調査地)에 출현(出現)한 종(種) 중(中)에서 열(熱)에 가장 약(弱)한 결과(結果)를 나타내고 있다(표(表)5). 4. 전반적(全般的)인 면(面)에서 발아율(發芽率)이 목본(木本)보다 초본(草本)이 높은 지수(指數)를 차지하고 있는 이유는 차조사지(此調査地)에는 초본(草本)이 대부분(大部分) 군생(群生)을 하고 있어 종자결실량(種子結實量)이 목본(木本)보다 많은데도 원인(原因)이 있다고 생각된다.(Fig. 11)

• 대한한의학방제학회지
• /
• 제15권2호
• /
• pp.47-64
• /
• 2007

This report describes 94 prescriptions related to the use of Radix Angelicae Dahuricae main bl ended from Donguibogam. The following conclusions were reached through investigations on the prescriptions that use Radix Angelicae Dahuricae as a key component. 11.7% of wind. 10.6% of carbuncle and deep-rooted carbuncle. recorded the largest number of clinical frequency of the prescriptions in therapeutic use when Radix Angelicae Dahuricae was ta ken as a monarch drug in prescriptions, Prescriptions that utilize Radix Angelicae Dahuricae as t he main component are used in the treatment of apoplexy and carbuncle and deep-rooted carbuncle. headache. wound and they are also used for treating 26 different types of diseases. The prescriptions are compounded with Radix Angelicae Dahuricae as a monarch drug can ap ply to apoplexy, exogenous febrile disease, invasion by wind. wind-cold pathogen, wind-heat path ogen. epidemic disease, pestilence. bruise, bites, deficiency of liver and kidney, deficiency, phlegm-fire, phlegm-heat. The dosage of Radix Angelicae Dahuricae is 0.37g to 7.5g, however 3.75g has be en taken the most for clinical application. The function of Radix Angelicae Dahuricae is to expelling Wind and relieving pain, to expelling wound and forming muscle. to astrict and neutralizing poison. to expelling wind and to getting through body hole. to emit and relieving pain from the combination of drugs and prescriptions.

• 대한한의학방제학회지
• /
• 제13권1호
• /
• pp.195-213
• /
• 2005

This report describes the remedial fields, symptoms, pathology, dosage, prescriptional constitution of 46 studies related to the use of Lignum akebiae main blended prescriptions from Dongeubogam. The following conclusions were reached through investigations on the prescriptions that use Lignum akebiae as a key ingredient. Lignum akebiae blended prescriptions are utilized 17.4% of prescriptions appear in the chapter of urine. Prescriptions that utilize Lignum akebiae as the main ingredient are used commonly in the treatment of the symptoms of a urine and a cystic disease related to the urinary organs, or the diseases of eye, ear, nose, throat and the symptoms of a tumor, abscess. Lignum akebiae is utilized for an etiological and pathologenic fators related to heat, dampness, phlegm and summer heat such as excessive fever of heart and bladder, fever of small intestine, lower energizer dampness and heat, fever due to blood deficiency, phlegm fire, affection by summer heat and dampness etc. The clinical dosage of Lignum akebiae is 1 don(about 3.75gram), according to symptoms, it has ranged at a wide variety of amounts from 3 pun(about 1.13gram) to 1.5 don(about 11.25gram). Lignum akebiae is widely applied with base prescriptions such as Dozuksan, Moktongchajuntang, Manjunmoktongtang. etc.

• 대한한의학방제학회지
• /
• 제17권1호
• /
• pp.61-74
• /
• 2009

This report describes 46 studies related to prescriptions which are mainly used Semen Arecae from Dongeuibogam. The following conclusions were reached through investigations on the prescriptions that use Semen Arecae as a main component. 19.6% of a malaria, 17.4% of an evacuation problem, recorded the largest number of clinical frequency of the prescriptions in therapeutic use when Semen Arecae was taken as a main component in prescriptions Prescriptions that utilize Semen Arecae as the main ingredient are used in the treatment of a malaria, an evacuation problem and a malignant dermatosis. they are also used for treating 11 different types of diseases. The prescriptions are compounded with Semen Arecae as a main component which can be applied to an affection by wind-cold, a heat(fire) syndrome, a cold-stroke, a phlegm-retention syndrome, a constipation induced by apoplexy, a stagnation of vital energy, an asthenia of the spleen and the stomach, a convulsion caused by improper diet, a parasitic infestation and a traumatic disease. The dosage of Semen Arecae is 2.5pun(nearly 0.94g) to 3don(nearly 11.25g), however 1don(nearly 3.75g) has been taken the most for clinical application. When Semen Arecae is combined with basic prescriptions such as Ijintang and Bulium, it applies symptoms of malaria. In addition, when Semen Arecae is combined with basic prescriptions such as Daemainhwan, Soseungkitang and Samatang, it utilizes an evacuation problem.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.230-235
• /
• 2001

There are more than 15 millions cars or motors in Taiwan. According to the statistics from Environmental Protection Administration, the number of resulting scrap tires are near 110 thousand tons each year. The tire recycle programs in Taiwan were first conducted in 1989 and executed by ROC Scrap Tire Foundation. However, the current efficiency of the tire recycling industry still needs to be improved to minimize the environmental problem or fire hazards caused by scrap tires storage. Ten major tire-recycling factories are surveyed in this study. The investigations include the source of scrap tire, the shredding process, the market of products, the management of wastes disposal, and the difficulties of these sectors. As the varieties of the shredding machines of the recycle factories, there are three kinds of final products which include powder, granular, and chips. The wastes, wires and fibers, produced by the shredding process are the major problems fur all the factories. The percentage of the wire and fiber removal from rubbers still needs to be increased. The best approaches found in this study to increase the efficiency of scrap tire recycling processes are proposed which include the improvement of magnetic separation system fiber/rubber separation system and the minimization of waste disposal. A categorized standard of the processing outputs is suggested as a reference for the decision-making of the tire-recycling factories.

• Steel and Composite Structures
• /
• 제9권4호
• /
• pp.349-366
• /
• 2009

The composite slim beam has become popular throughout Europe in recent years and has also been used on some projects in China. With its steel section encased in a concrete slab, the steel-concrete composite slim beam can provide the floor construction with minimum depth and high fire resistance. However, the design method of the T-shape steel-concrete composite beam is no longer applicable to the composite slim beam with deep deck for its special construction, of which the present design models are not available but mainly depend on experiences. The elevation of the flexural stiffness and bending capacity of composite slim beams with deep deck is rather complicated, because the influences of many factors should be taken into account, such as the variable section dimensions, development of cracks and non-linear characteristics of concrete, etc. In this paper, experimental investigations have been conducted into the flexural behavior of two specimens of simply supported composite slim beam with deep deck. The emphases were laid on the bonding force on the interface between steel beam and concrete, the stress distribution of beam section, the flexural stiffness and bending capacity of the composite beams. Based on the experimental results, the reduction factor of equivalent stress distribution in concrete flange is suggested, and the calculation method of flexural stiffness and bending capacity of simply supported slim beams are proposed.