• 제목/요약/키워드: fire fuel

검색결과 426건 처리시간 0.03초

항공기 엔진베이 내 소화장치 성능예측을 위한 연구 (A Study on the Performance Prediction of Fire Extinguish System in Aircraft Engine Bay)

  • 박영하;김형식;김진환;조수용
    • 한국항공우주학회지
    • /
    • 제40권8호
    • /
    • pp.718-725
    • /
    • 2012
  • 항공기 엔진베이에 누유된 연료나 오일이 고온의 엔진 표면에 닿게 되면 점화되어 화재를 야기시킬 위험성이 높다. 이를 방지하기 위하여서는 소화제를 화재방지영역에 신속하게 분사하고 소화제의 농도가 높이 유지되도록 화재방지시스템을 설계하여야 한다. FAA에서는 소화제가 화재방지영역 전체에 6%의 농도를 0.5초 이상 유지하는 것으로 규정하고 있다. 이러한 요구를 만족할 수 있는 화재감지시스템의 개발을 위하여, 본 연구에서는 엔진베이에 소화제의 분사와 농도측정에 대한 수치적인 연구와 실험적인 연구를 수행하였다. 분사된 소화제의 분사시간이나 농도유지에 대하여 실험과 수치적인 연구의 결과는 유사한 경향을 보이나, 실험에서 센서의 응답성으로 인하여 소화제의 농도가 늦게 측정되었다.

군용 회전익항공기 연료계통 내추락성 입증에 관한 연구 (A Study on the Verification of Crashworthiness for Fuel System of Military Rotorcraft)

  • 박상수;양준모;김문국;김재철
    • 항공우주시스템공학회지
    • /
    • 제17권1호
    • /
    • pp.16-23
    • /
    • 2023
  • 항공기 연료계통은 연료 공급, 연료탱크 간 연료이송, 각 연료탱크 내의 잔여 연료량 측정 등의 기능을 수행하며, 추락 시 화재의 직접적인 원인이 되기 때문에 추락에 견딜 수 있도록 설계하여 승무원의 추락 생존성을 높여야 한다. 민간에서는 연료계통의 내추락 설계를 감항 요구도로 반영하여 철저한 검증을 요구하고 있으며, 비행안전이 확보된 항공기 개발을 위해 관련 감항인증기준 및 입증방안에 대한 연구가 필수적이나 미미한 실정이다. 이러한 사항에 착안하여 본 논문에서는 연료계통 내추락성 입증 지침 마련을 통한 비행안전성 향상 방안 연구의 일환으로 군용 회전익항공기에 적용 가능한 연료계통 내추락 관련 감항인증기준, 입증방법 및 적용 사례에 대한 분석 결과를 기술하였다.

자연 및 강제 배기시의 터널 내 연기거동에 관한 실험적 연구 (An Experimental Study of Smoke Movement in Tunnel Fire with Natural and Forced Ventilations)

  • 황철홍;유병훈;금성민;김정엽;신현준;이창언
    • 대한기계학회논문집B
    • /
    • 제29권6호
    • /
    • pp.711-721
    • /
    • 2005
  • In order to design of emergency ventilation systems, the smoke movements in tunnel fire with natural and forced ventilation were investigated. Reduced-scale experiments were carried out under the Froude scaling with novel fire source consisting many wicks. Temperature profiles were measured under the ceiling and vertical direction along the center of the tunnel and poisonous gases were measured at emergency exit point in the natural ventilation case. In forced ventilation, temperature profiles were measured with various flow rate to obtain critical velocity. The results showed that the interval of emergency exit having 225m was estimated reasonably through the measurements of temperature variation and poisonous gas in the natural ventilation. In the case of forced ventilation, the temperature distribution near fire source is remarkably different from that of natural ventilation. Also, the critical velocity to prevent upstream smoke flow has the range of 0.57m/s between 0.64m/s. Finally, it was also identified that although the increase of flow rate can suppress the backward flow of smoke to upstream direction, brings about the increase of flame intensity near stoichiometric fuel/air ratio.

수술방 화재: 수술 종료 시 알코올 함유 피부 소독액을 이용한 수술부위 세척 이후 전기소작기 사용 주의 (Operation Room Fire: Caution for Using Electrocautery after Rinsing Operation Field at the End of the Surgery with Alcohol-Based Cleansing Solutions)

  • 송종근;신효정;이준용
    • 대한화상학회지
    • /
    • 제22권2호
    • /
    • pp.34-37
    • /
    • 2019
  • Fires in operating rooms rarely occur. However, this type of disaster can complicate almost any surgical procedure. Fuel, heat and oxygen are related with fire outbreak. When ignition sources such as alcohol-based surgical preparation solutions are present, the risk of an operating room fire increases, and burns are more severe in such conditions. Many manufacturers recommend waiting at least three minutes after application to allow complete drying for reduce fire risk. There are a few studies regarding flame burns in the operation room, although most of these studies are related to preoperative skin preparation. However, alcohol containing solutions can be used occasionally for cleansing of the operation field after the surgery, therefore, the surgical team should pay attention to surgical fires, even if they have completed the operation successfully. We present our case of a post-operative flame burn and introduce some precautions that will reduce the risk of alcohol burns.

자동차 흡배기장치, 발전기 튜닝 및 배기측 인화성 물질 유입에 관련된 화재사례 연구 (Fire Examples Study of Intake and Exhaust System, Alternator Tuning and Inflow of Inflammables on Exhaust Part in a Car)

  • 이일권;국창호;서문원;유창배;염광옥;임춘무;정동화
    • 한국가스학회지
    • /
    • 제18권5호
    • /
    • pp.47-51
    • /
    • 2014
  • 이 논문은 자동차 흡배기 장치, 발전기 튜닝 및 배기 측 인화성 물질 유입에 관련된 화재에 대한 사례를 분석하고 연구하는 것이다. 첫 번째 사례는, 흡기와 배기 장치의 튜닝한 상태에서 자동차의 시동을 켜 놓고 정차된 상태에서 가연성 스티로폼이 자동차 하체로 유입되고, 배기 열에 의해 불이 붙었고, 이 열원에 누설된 연료가 화재를 확대시킨 것으로 확인되었다. 두 번째 사례는 실내의 오디오 시스템을 튜닝하고 필요한 전기의 양을 증대하기 위해 발전기 용량을 높임으로써 발전기와 연결된 배선이 과열되어 화재가 발생된 것으로 확인되었다. 세 번째 사례의 원인은 정비사가 오일을 교환한 다음 플라스틱 용기로 된 깔때기를 엔진 내부에 둔 것이 엔진의 배기열에 의해 화재가 발생된 것으로 확인되었다. 따라서, 엔진의 흡배기 시스템과 발전기 시스템을 개조하지 않도록 하여야 하며, 자동차를 수리할 때나 점검할 때 배기측에 이물질이 유입되어 화재가 발생하지 않도록 자동차의 관리에 세심한 주의를 하여야 한다.

개방형주차장의 소방설비 개선 제안 (Improvement Proposal for the Fire Suppression Systems of Open Parking Lots)

  • 정기신
    • 한국화재소방학회논문지
    • /
    • 제30권6호
    • /
    • pp.1-8
    • /
    • 2016
  • 유가의 상승과 환경의 문제로 차량중량의 감소에 의한 차량연비를 개선하기 위하여 가연물인 플라스틱과 직물 등의 사용이 획기적으로 증대되어 주차장에서 화재가 발생하면 2000년대 중반 이전에는 한 두 대가 연소되고 마는 것과는 달리 주차된 차량 전체가 연소하는 화재가 많이 발생하였다. 본 연구에서 차량에 사용되는 플라스틱 등 가연물의 량을 확인한 결과 한 대에 316.2 kg으로 차량 전체무게 1935 kg 대비 16.34%가 되어 과거대비 10배 이상의 증가가 있었다. 또한 주차장의 소화설비로 스프링클러를 설치 시 물분무설비의 원래 성능대로 살수밀도를 $20lpm/m^2$를 사용할 것과 필로티 주차장에 호스릴이산화탄소소화설비 대신 적응성이 있는 포, 분말, 강화액 설비를 사용할 것을 요구하였다.

통계자료에 의한 기상과 산불특성의 관련성 -전라남도지방을 중심으로- (The Studies on Relationship Between Forest Fire Characteristics and Weather Phase in Jeollanam-do Region)

  • 이시영;박흥석;김영웅;윤화영;김종갑
    • 농업생명과학연구
    • /
    • 제45권4호
    • /
    • pp.29-35
    • /
    • 2011
  • 본 연구에서는 2005년부터 2009년까지 전라남도 지역의 기상변화와 산불특성과의 관련성을 파악하기 위해 기상요소와 산불 발생자료 (시간, 원인)를 분석한 결과, 최고온도 상승과 상대습도 감소로 인해 산불발생의 위험성이 높은 기후조건이 형성되었으며, 산불은 최고기온 $10{\sim}20^{\circ}C$에서, 상대습도 40~60% 에서, 평균풍속 2 m/s이하에서 주로 발생하였다. 이러한 기상조건은 강우 후에 2~3일이면 산불발생 위험이 높은 기상조건이 형성되었다.

Hot- Fire Injector Test for Determination of Combustion Stability Boundaries Using Model Chamber

  • Sohn Chae Hoon;Seol Woo-Seok;Shibanov Alexander A.;Pikalov Valery P.
    • Journal of Mechanical Science and Technology
    • /
    • 제19권9호
    • /
    • pp.1821-1832
    • /
    • 2005
  • This study realizes the conceptual method to predict combustion instability in actual full-scale combustion chamber of rocket engines by experimental tests with model (sub-scale) chamber. The model chamber was designed based on the methodologies proposed in the previous work regarding geometrical dimensions and operating conditions, and hot-fire test procedures were followed to obtain stability boundaries. From the experimental tests, two instability regions are presented by the parameters of combustion-chamber pressure and mixture (oxidizer/fuel) ratio, which are customary for combustor designers. It is found that instability characteristics in the chamber with the adopted jet injectors can be explained by the correlation between the characteristic burning or mixing time and the characteristic acoustic time: In each instability region, dynamic behaviors of flames are investigated to verify the hydrodynamically-derived characteristic lengths of the jet injectors. Large-amplitude pressure oscillation observed in upper instability region is found to be generated by lifted-off flames.

자동차의 비틀림 강성 향상에 관한 연구 (A Study on Torsional Stiffness Improvement of a Vehicle)

  • 임기창;임석현
    • 한국화재소방학회논문지
    • /
    • 제11권1호
    • /
    • pp.47-54
    • /
    • 1997
  • 소방자동차를 비롯한 모든 자동차의 비툴립 강성이 약하면 차체에 크혜이 발생함과 동시에 고유진 동수가 낮아져 진동소음 발생의 원인이 된다. 이 논문은 최소한의 중량증가로 비틀림 강성을 최대한 중 가시키는 방안올 제시한 것에 관한 것으로, 방안 검토를 위하여 탄성론을 이용한 이론해석을 실시하였 고, 또한 이의 검증을 위하여 유한요소법에 의한 해석 및 실제 차체를 이용한 실험을 질시하였다. 본 논 문에서 사용한 자동차는 숭용차를 사용하였다. 그 이유는 실험 및 계산이 용이하고, 또한 계산결과를 소방자동차 퉁을 비롯한 모든 자동차에 적용 할 수 있기 때문이다.

  • PDF