• 대한산업공학회지
• /
• 제1권1호
• /
• pp.79-86
• /
• 1975

The optimal time-sequential distribution of supporting fire against enemy ground units in combat against attacking friendly units is studied. Lanchester type models of warfare are combined with optimal control theory in this investigation. The optimal time-sequential fire-support policy is characterized for a specific problem. Although complete details for the determination of the optimal policy are not given, it is conjectured, on the basis of the theorems which were proved, that for this problem the optimal policy is to always concentrate all supporting fire on the same enemy unit until supporting fire must be lifted.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.695-699
• /
• 2003

It is general to use the control network in control systems in order to reduce the complexity of the related wiring harnesses and to improve the system flexibility. CAN becomes one of the most popular network protocols because of its low price, multiple sources, high performance and reliability. This paper describes a CAN based real-time control of the fire detection system for the intelligent building system. The proposed fire detection and alarm system is stronger than the previous one against noises and communication media faults and can solve many problems such as complex cabling and increment of I/O ports by using many sensors. Furthermore, MMI can be achieved easily with the personal computer that is used for replacing the traditional monitoring system. The proposed system is implemented and the experimental results are given.

• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.151-160
• /
• 2009

At this study, we are developing a possible control system through remote monitoring for fire protection in various chemical factory facilities. It's possible to do real time confirmation of a normal operation presence of the various equipment installed in a chemical factory through the internet network at a fire fighting head office, an area fire department and a chemical factory situation room using this remote monitoring control system. When occurring, abnormal operation is the remote monitoring control system, which can check this immediately and notify the situation room administrator. After it was tested using developed remote monitoring control system, the remote monitoring for which the internet network was used confirmed possible.

• 대한안전경영과학회지
• /
• 제10권3호
• /
• pp.43-53
• /
• 2008

This study is carried out for the fire safety of the factory building, the fire risk reduction measure in compliance with an example approached in fire risk reduction systematically, contribute to reduce the fire risk. The analytical fire risk process of discovering, identifying, estimating and evaluating risk and control measure as risk reduction measures are core concept, applies loss prevention with loss control techniques. The painting process in the workplace where the fire hazard and death accident accompanies coexists. Loss prevention problem of creation prevention of dangerous atmosphere at workplace is health and human services problem of normal circumstances, must be inspected with problem of combustible gases at the time of fire explosion. Static electricity measure accomplished the risk control process thoroughly as the fire risk reduction process model with the ignition sources measure which is presented. Fire risk from within organizing will be able to classify with each field by detailedly but risk treatment process will be able to apply basically all the same concept. Consequently about risk management example from before, this study is proposed risk management techniques that standardized rightly in the actual condition of organization with one plan, with discovery of fire risk, the feedback process in compliance with a fire risk reduction and the review which control the result is joint responsibility of engineer, technical expert and manager as part of safety management to practice with the fact must be supervised.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 D
• /
• pp.618-620
• /
• 2000

In case of fire in the high-rise buildings, the appropriate and safe evacuation plans for the building residents are very important to minimize the number of casualties. Since the evacuation time usually depends on the floor plans of the buildings, the evacuation plans should be considered while the architectural design is done. Conventionally, the calculation of the evacuation time in the case of fire breakout is based on the approximate mathematical equations which are prone to error. In this study, the simulator model is developed to help the architectural designers to access the more accurate evacuation time and find out the floor plans which offers the most safe evacuation plans for the residents in case of fire.

• 한국화재소방학회논문지
• /
• 제24권1호
• /
• pp.24-30
• /
• 2010

유비쿼터스 환경에 적용을 위한 목적으로 구현된 통합형 화재수신기의 개발 경험을 보고한다. 유비쿼터스 환경을 위해 수신기가 본래 가지고 있는 능력에 부가적으로 크게 세가지의 추가적인 기능이 구현된다. 즉, 지그비가 적용된 무선감지기와의 접속기능과 이더넷을 통해 전송되는 카메라 영상신호의 화면출력 기능이다. 또한 분산형 화재수신기 간의 시간동기화 기능을 위해 GPS 모듈이 적용되고 구현된다.

• 한국인터넷방송통신학회논문지
• /
• 제22권6호
• /
• pp.1-6
• /
• 2022

본 연구는 실시간으로 원격제어가 가능한 무인소방 시스템을 제안한다. 안전지대에 위치한 조종자가 화재현장에 투입된 무인 소방대차를 무선통신으로 원격조종함으로서 재난 및 긴급 상황에 신속하고 안전한 방재 작업을 진행할 수 있다. 이를 위하여, 소화전에 연결되어 고압으로 살수 작업이 가능한 무인 소방트럭에 대하여 제안하고, 이를 시제품으로 개발 하였다. 또한 LTE통신 상황에서 서로 다른 영상형식에 따른 시간지연과 FPS를 정량화하여, 효과적인 실시간 원격 조종 시스템에 대하여 제안하였다. 제안된 시스템의 검증을 위하여, 안전지대의 조종자와 무인소방대차를 3km 떨어진 곳에 위치시키고 주행테스트를 진행하였다. 무인소방대차를 LTE통신을 통하여 접속하고, 영상과 모션을 조종자에게 전달하여 평균 120msec의 시간지연으로 주행 테스트한 실험 결과를 제시한다.

• 대한기계학회논문집B
• /
• 제27권3호
• /
• pp.367-373
• /
• 2003

The present study investigates the fire suppression characteristics using a water mist fire suppression system. The fire extinguishing times are measured for various fire sources, fuel types, and different total flooding rates of water mist. Pool fire with hydrocabon fuel is successfully extinguished within a minute under the operating conditions of the water mist system. Two different regimes of the smoke layer cooling are observed, such as rapid and slow cooling processes. The regimes are divided by threshold time which is calculated with auto-correlation function. The threshold time for the initial cooling decreases with increasing water flow-rates and fire sources. These initial cooling effects play an important role in preventing the occurance of flashover fire by the initial fire suppression.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.543-545
• /
• 1999

In case of fire in the high-rise buildings, the appropriate and safe evacuation plans for the building residents are very important to minimize the number of casualties. Since the evacuation time usually depends on the floor plans of the buildings, the evacuation plans should be considered while the architectural design is done. Conventionally, the calculation of the evacuation time in the case of fire breakout is based on the approximate mathematical equations which are prone to error. In this study, the simulator model is developed to help the architectural designers to access the more accurate evacuation time and find out the floor plans which offers the most safe evacuation plans for the residents in case of fire.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.201-205
• /
• 2002

In case of fire in the buildings, the appropriate and safe evacuation plans for the building residents are very important to minimize the number of casualties. Since the evacuation time usually depends on the stairs and passages of design of the building, the evacuation plans should be considered while the architectural design is done. Conventionally, the calculation of the evacuation time in the case of fire breakout is based on the approximate mathematical equations which are prone to error. In this study, the simulation software is developed to help the architectural designers to access the more accurate evacuation time and find out the floor plans which offers the most sage evacuation plans for the residents in case of fire.