• KIEAE Journal
• /
• 제9권6호
• /
• pp.81-87
• /
• 2009

The purpose of the present study is to establish structural noise analyzing method for apartments building floor with structural-acoustic coupling analysis modeling. Noise through floor in the room is recognized as a significant problem with the consequence that noise isolation technique has been studied in the various fields of industry. From among noise factors, resonance sound is the main reason for solid noise of the floor, which is occurred by mechanical vibrations of the acoustic boundary line and the change of velocity. To analyse this phenomenon, numerical computation methods are provided in many fields, In this study, evaluation method for slab is established using finite element method, and a case study for analyzing acoustic phenomenon was suggested. The results show that numerical method, especially F.E.M, has a good approximation to predict noise at floors.

• 한국정밀공학회지
• /
• 제16권8호
• /
• pp.28-37
• /
• 1999

This investigation is the result of the structural analysis by finite element method and test for considering stress distribution and stress concentration to be generated according to the change of attached shape and method of the bracket to pipe in welding structure. Generally, members that consist structures are subjected to various forces and are jointed each other with a number of bracket. In this case, circular pipe was adapted in order to weld these members easily and to study the optimal design which is used a beam with shape section as main components of the structure, According to attached shape and method, distributed stress on circular pipe is appeared so differently. This may result deeply effects with respect to thickness, material properties. So a study on attaching shape and method of bracket to circular pipe is needed. In this paper, to obtain the maximum equivalent stress or stress concentration was used experimental and F.E.M. analysis. First five parameter was defined with respect to attached a shape and method to circular pipe i.e. the variation of the attached area, the variation of the attached shape, the variation of the attached length, the variation of both directin angles, the variation of the upper angle. Afterward the experimental analysis was practiced as the variation of the both direction angel and the finite element analysis was practiced as each parameters. We can discover stress distribution and stress concentration according to the change of form of bracket. And the result can be referenced for a design of similar structure.

• Steel and Composite Structures
• /
• 제8권3호
• /
• pp.179-200
• /
• 2008

This paper reports the results of a recent experimental study into the behavior of welded fin-plate connections to both hollow and concrete filled tubular (CFT) columns under shear. Experiments have been performed at both ambient and elevated temperatures with the aid of an electric kiln. The observed failure modes include fracture of the fin plate and tearing out of the tube around the welds. By considering the results of previously published research, the current design method for similar connections under purely tensile load, in CIDECT Guide 9, based on a deformation limit of 3% of the tube width is shown to be inadequate when evaluating the ultimate strength of such connections. By comparing the results from the current test program which failed in the fin-plate with Eurocode guidance for failure of a fin-plate alone under shear and bending load it is shown that the column face influences the overall connection strength regardless of failure mode. Concrete in-fill is observed to significantly increase the strength of connections over empty specimens, and circular column specimens were observed to exhibit greater strength than similarly proportioned square columns. A finite element (F.E.) model, developed using ABAQUS, is presented and validated against the experimental results in order that extensive parametric tests may be subsequently performed. When validating the model against elevated temperature tests it was found that using reduction factors suggested in published research for the specific steel grades improved results over applying the generic Eurocode elevated temperature steel strength reduction factors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.86-88
• /
• 2004

In this paper, optimal stator slot shape of 3-phase inverter-fed induction motor is designed to reduce stator core and winding losses. For the analysis, the F.E.M on 1 phase band periodic condition in stator is coupled with harmonic equivalent circuit. For the optimal design, the conjugate gradient method is used as an optimizing algorithm. The stator core and winding losses are reduced by the design method. The results are verified by those of the time-step finite element analysis.

• 한국초전도ㆍ저온공학회논문지
• /
• 제12권2호
• /
• pp.13-16
• /
• 2010

The superconducting synchronous motor or generator mostly has high permeability iron only around outer yoke portion. Therefore, if excitation voltage (Back E.M.F) is calculated from 2 dimensional magnetic field distributions, it can be largely different from actual value due to additional voltage originated from end coils. In order to calculate the excitation voltage more accurately, 3 dimensional magnetic field calculation is necessary for including the end coil effect from large air-gap structure. The excitation voltage can be calculated by stator (armature) coil linkage flux originated from rotor (field) coil excitation, but it is difficult to calculate the flux linkage exactly because of complicated structure of the stator coil. This paper shows a method to calculate the excitation voltage from 3 dimensional magnetic energy that can be calculated directly from volume integration of magnetic flux density and field intensity scalar product through FEM (Finite Element Method) analysis software.

• 토지주택연구
• /
• 제6권3호
• /
• pp.129-138
• /
• 2015

최근 국내의 건축구조는 공간활용을 극대화할 수 있도록 계획되고 있다. 공간활용의 장점을 실현하기 위하여 하이브리드 OCB(Optimized Composite Beam)보를 개발하였다. 본 논문에서 개발된 건축용 OCB보는 부모멘트 구간에서는 노출강연선으로 보강된 H형강으로 구성되고 정모멘트 영역에서는 프리텐션 방식의 PSC 구조로 구성된다. 본 연구에선 유한요소법을 이용하여 건축용 OCB보의 휨성능을 조사하였다. 15m, 20m, 30m 길이의 OCB모형을 구성하여 재료 및 기하학적 비선형 정적해석을 수행하였다. 해석결과로부터 다음과 같은 결과를 얻었다. 1)해석모델의 초기균열은 사용하중이상에서 모두 발생되었다. 2)사용하중단계에서 처짐은 건축구조설계기준에 제시된 허용처짐량 이내로 만족하였다. 3)유한요소모델의 파괴 시 극한하중은 모두 단면의 설계공칭강도 이상에서 발생되었다. 해석결과로부터 건축용 OCB보의 구조적인 신뢰성이 입증되었다.

• 전산구조공학
• /
• 제7권2호
• /
• pp.101-109
• /
• 1994

내압을 받는 섬유강화 복합적층 파이프 구조를 해석하기 우해 감절점 원통형 쉘 유한요소를 이용하였다. 이요소는 lockintg현상을 제거하고, 수렴성을 개선하기 위해 감차적분기법, 변위형의 추가, 가정된 전단 변형 도장을 사용한 9절점의 3차원 쉘 유한요소이다. 이 유한요소를 이용하여 여러개의 예제를 해석하고, 결과를 이론식 및 다른 구조해석 프로그램과 비교하였다. 비교결과 유한요소의 수렴도 양호하였고, 섬유강과 복합적층 파이프 구조의 섬유 배향 각도를 증가시킴에 따라 파이프의 처짐은 감소하면서 파이프의 강성이 증가함을 알 수 있고 이는 또한 90.deg.적층 각도가 내압을 받는 파이프 구조의 hoop tension을 유효하게 받을 수 있음을 보여주고 있다.

• 대한토목학회논문집
• /
• 제5권2호
• /
• pp.83-90
• /
• 1985

본(本) 논문(論文)은 제체(堤體)의 중앙심벽형(中央心壁型) model을 제작(製作)해서 상류측(上流側) 각(各) 수위(水位)의 변화(變化)에 대한 침투유량(浸透流量)을 실험(實驗)을 통하여 구하고, 이 때의 침윤선형상(浸潤線形狀)과 Equipotential line에 대하여도 고찰(考察)한 것이다. 또한 실험(實驗)에서 얻은 자료(資料)를 FEM기법(技法)을 사용하여 구한 유선망(流線網)의 각요소별(各要素別) Flow-rate에 대한 유속(流速)과 침투유량(浸透流量)을 실험치(實驗値)와 근사리론공식(近似理論公式)에서 산출(算出)된 값과 비교검토(比較檢討)하였다. 침투수량(浸透水量)은 고수위시(高水位時)에서는 실험치(實驗値)보다 FEM 값이 적게 나타났으며, 저수위시(低水位時)에는 거의 비슷한 값이었다. 그리고, 유선망(流線網)이 형성(形成)된 각(各) 요소별(要素別) Flow-rate 는 X, Z 축(軸)은 수위변화(水位變化)가 있어 흐름에 따른 유속(流速)이 크나 Y 축(軸)의 유속(流速)은 무시할 수 있을 정도의 적은 값이었다.

• Earthquakes and Structures
• /
• 제1권1호
• /
• pp.109-127
• /
• 2010

This work aims at introducing structural sensitivity analysis capabilities into existing commercial finite element software codes for the purpose of mapping retrofit strategies for a broad group of structures including heritage-type buildings. More specifically, the first stage sensitivity analysis is implemented for the standard deterministic environment, followed by stochastic structural sensitivity analysis defined for the probabilistic environment in a subsequent, second phase. It is believed that this new generation of software that will be released by the industrial partner will address the needs of a rapidly developing specialty within the engineering design profession, namely commercial retrofit and rehabilitation activities. In congested urban areas, these activities are carried out in reference to a certain percentage of the contemporary building stock that can no longer be demolished to give room for new construction because of economical, historical or cultural reasons. Furthermore, such analysis tools are becoming essential in reference to a new generation of national codes that spell out in detail how retrofit strategies ought to be implemented. More specifically, our work focuses on identifying the minimum-cost intervention on a given structure undergoing retrofit. Finally, an additional factor that arises in earthquake-prone regions across the world is the random nature of seismic activity that further complicates the task of determining the dynamic overstress that is being induced in the building stock and the additional demands placed on the supporting structural system.

• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.71-78
• /
• 2001

In GMA(Gas Metal Arc)Welding, the weld size that is a locally melted area of a workpiece is one of the most important considerations in determining the strength of a welded structure. Variations in the weld power and the welding heat flux may affect the weld pool formation and ultimately the size of the weld. Therefore, an accurate prediction of the weld size requires a precise analysis of the weld thermal cycle. In this study, a model which can estimate the weld bead geometry and a method for thermal analysis, including the model, are suggested. In order to analyze the weld bead geometry, a mathematical model was developed with transformed coordinates to apply to the horizontal fillet joints. A heat flow analysis was performed with a two dimensional finite element model that was adopted for computing the base metal melting zone. The reliability of the proposed model and the thermal analysis was evaluated through experiments, and the results showed that the proposed model was very effective for predicting the weld bead shape and good correspondence in melting zone of the base metal.