• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.26-34
• /
• 2008

Wool fabric having high moisture content were treated with fluorocarbon-based water and oil repellent finishing agents by pad-dry-cure system. Three types of finishing agents which were regular-type or nano-type were adapted to compare the surface chemical composition, water and oil repellent property, crease recovery angle, and durability to repeated laundering. From the surface chemical compositions resulted by ESCA and C1s curve-fitting, it was shown that the regular-type finishing agent were easily taken off from the finished wool fabrics after repeated laundering. On the other hand, the fluoroalkyl groups of nano-type finishing agents turned round from fabric surface to fiber internal after repeated laundering. The water repellency of the wool fabrics treated with regular-type agent had a little changes according to the treatment condition changes and sharply decreased with repeated laundering. However, these values when treated with nano-type agents increased with the concentration and cure temperature and were maintained after 20 times laundering. The wool fabrics treated with nano-type agent had a great oil repellency irrespective of treatment conditions. Furthermore, the wrinkle recovery values of the wool fabrics treated with nano-type agents were higher than those of the fabrics treated with regular-type agent and were unchanged after 20 times laundering.

• 한국정밀공학회지
• /
• 제18권3호
• /
• pp.61-67
• /
• 2001

The finishing process for die is an important process because it has influence on final quality of products. Recently s study on development of 5-axis die automated finishing machine has been progressed. But die must be moved from the cutting machine to the die automated finishing machine. So manufacturing cost and time increase and machining error occurs by transfer. So, in this study, a 3-axis machining center was applied to die finishing. Because cutting tool can be changed to finishing tool by ATC, both of cutting and finishing process are possible on the machine. However, this application results in the decrease of finishing for the improvement of form accuracy. So this study focused on the generation of finishing tool path suitable to 3-axis die finishing for the improvement of form accuracy. The form accuracy evaluation is performed by the measurement of removal depth using a stylus profilometer. From the result, it is confirmed that form accuracy was improved less than 2$\mu$m of removal depth error.

• 대한소아치과학회지
• /
• 제47권2호
• /
• pp.188-195
• /
• 2020

이 연구는 새롭게 개발된 알카자이트 재료인 Cention N에 finishing처리를 한뒤에 표면 거칠기와 박테리아 부착에 대하여 조사하고자 함이다. 레진강화형 글래스아이오노머와 컴포짓트 레진, 알카자이트 재료를 원통형의 디스크 형태로 제작하였다(n = 48). 이 후 대조군과 3가지 카바이드버, 미세다이아몬드 버, 화이트스톤버의 피니싱 버에 따른 4가지 하위군으로 분류하였다. 표면 거칠기는 atomic force microscope으로 조사하였으며 표면관찰은 scanning electron microscope을 이용하여 진행하였다. 우식원성 미생물인 streptococcus mutans의 시편 부착을 위하여 CDC biofilm reactor를 사용하여 바이오필름을 배양한후 집락형성단위를 측정하였다. 레진과 Cention N의 아무처리 하지 않은 컨트롤 군의 표면 거칠기는 통계적으로 유의하게 피니싱 처리된 시편들보다 거칠었다. 하지만 표면 거칠기와 미생물 부착사이의 상관관계는 매우 약했다(PCC = 0.13). RMGI와 Cention N은 레진시편에 비해 미생물 부착이 적게 일어났다. Cention N은 피니싱만으로도 임상적으로 허용되는 수준인 0.2 ㎛ 이하의 거칠기를 보였으며 이온 방출 성질로 미생물 부착이 레진과 비교시 적은 것을 확인할수 있었다.

• 패션비즈니스
• /
• 제13권2호
• /
• pp.78-86
• /
• 2009

When scouring and contraction finishing at $90^{\circ}C$ using Relaxer or Rotary Washer contraction and weight loss ratio in warp and weft directions were excellent. Also surface state of fabric after drying or sanding treatment was excellent without crease. Low melting polyester fabric showed a complete melting bond by heat setting(P/S) at above $160^{\circ}C$. The alkali hydrolysis reaction of polyester showed the breakpoint in the weight loss behavior test, polyester yarn showed a breakpoint ranging from 25% to 28%. This is due to the difference of the hydrolysis rate between regular polyester and soluble polyester. Initially the soluble polyester was eluted and micro-fibrillized 5 times faster than a regular polyester. At a later time, a regular polyester was reduced weight to impart a proper flexibility and drape property to the fabric. As a result of surface sanding finishing, the surface of interior fabric showed a surface state most stabilized when using Mesh No. 220 in mono 0.2d after elution finishing. When the rotation direction of sanding roller was pro-, pro-, pro-, and retro-direction, a directional effect of tuft was not shown, a writing effect as suede was exhibited and a surface state was even. Sublimation fastness was 3-4 class for polyester and 2-4 class for nylon. Light fastness 3-4 class after lapse of 100 hours and 2-4 class after lapse of 160 hours. Abrasion fastness was 3-4 class on wet and 4-5 class on dry Laundry fastness was 2-4 class. As such, the abrasion fastness is slightly reduced upon wetting and the use thereof for interior is excellent, whereas laundry fastness is slightly lowered.

• International Journal of Concrete Structures and Materials
• /
• 제2권2호
• /
• pp.83-90
• /
• 2008

Permeability to vapor and water among other performances required for finishing materials is dealt with in this study. The relative moisture content of concrete coated/covered with a finishing material was experimentally investigated while changing the environmental conditions including temperature, relative humidity, and rainfall. An organic paint (water-based urethane), organic synthetic resin emulsion-type film coating (film coating E), and inorganic porcelain tiles were selected as the finishing materials. When compared from the aspect of vapor and water permeability, the vapor permeability and water permeability of water-based urethane were high and low, respectively; those of film coating E were high and high, respectively; and those of porcelain tiles were low and low, respectively. This means that the moisture state of concrete structures is governed not only by the environmental conditions but also by the performance of finishing materials. It is therefore of paramount importance to appropriately select a finishing material to address the specific deteriorative factors involved in the concrete structure to be finished.

• 한국기계가공학회지
• /
• 제4권1호
• /
• pp.7-12
• /
• 2005

An internal finishing process by the application of magnetic abrasive finishing has been developed as a new technology to obtain a fine inner surface of pipe. In this paper, another method of magnetic abrasive machining in which the N and S magnetic poles are vibrated and a workpiece is rotated only is tried in a non-ferromagnetic pipe(SUS304), and its finishing characteristics is experimently investigated by various effective factors such as vibrating frequency and amplitude. From the experimental results, it is found that the vibration effects of magnetic poles on the finishing characteristics are large in internal finishing.

• 대한소아치과학회지
• /
• 제31권1호
• /
• pp.98-107
• /
• 2004

적절한 마무리와 연마는 치아 수복물의 심미성과 내구성 향상을 위해 필수적인 과정이다. 본 연구에서는 복합레진의 마무리/연마 과정 시행에 있어서 시기적 차이를 두어 마무리/연마 시기가 복합레진의 표면 거칠기와 경도에 미치는 영향을 비교하고자 하였다. 네 종류의 복합레진(Filtek A110, Silux Plus, Revolution formular2, Palfique Estelite)을 이용하여 시편을 제작하고 마무리/연마 과정을 거치지 않은 대조군과 중합 직후 마무리/연마를 시행한 경우와 1주 후 마무리/연마를 시행한 두 가지 실험군으로 구분하였다. 이 시편들의 표면 거칠기$(R_a\;value,\;{\mu}m)$와 경도(VHN)를 측정하고, 주사전자현미경으로 관찰하여 다음과 같은 결과를 얻었다. 1 네 가지 재료 모두 대조군에서 가장 활택한 표면을 얻었고 마무리/연마 과정을 거친 후 표면 거칠기가 증가하였으나, 마무리/연마시기에 따른 유의한 차이는 보이지 않았다. 2. 표면 거칠기는 중합 직후 마무리/연마를 시행한 경우 Silux Plus와 Revolution formular 2가 차이를 보였고, 1 주 후 시행한 경우 Silux Plus와 Palfique Estelite가 차이를 나타내었다(p<0.05). 3. 경도는 재료에 따라 Palfique Estelite > Filtek A110 > Silux Plus > Revolution formular 2 순으로 감소하였으나, 마무리/연마시기에 따른 차이는 보이지 않았다. 4. 마무리 연마시기가 표면 거칠기와 경도에 미치는 영향은 재료에 따라 차이를 보였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1248-1252
• /
• 2005

Mold-manufacturing process consists of machining and finishing process that are strongly related in each other. But there are few studies about mold-manufacturing process to control those two processes simultaneously. Especially, runout distorts the machined surface from expected so it changes the finishing process and mold-manufacturing time. In this work, basic analyses and experiments were carried out to study RVAS variation according to runout in HSM. To perform those analyses, firstly surface generation analysis was done including runout in ball end milling and then the RVAS that could relate machining and finishing process was proposed. And the optimal finishing process in HSM according to RVAS was also proposed. Through experiment runout occurrence and above analyses were verified.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.258-268
• /
• 2021

This study conducted on the introduction of recycled cellulose fibers, which are widely used in the textile industry as eco-friendly biomass materials, into polypropylene resins, which are mainly used for interior and exterior materials such as door trims and console parts of automobiles. In general, cellulose fibers can affect mechanical properties and have a lightening effect when used as a reinforcing agent. However, since cellulose fibers have hydrophilic properties and have relatively low compatibility with industrial polymer resins, they are used in combination through fiber hydrophobic surface treatment. Therefore, through this study, the reforming reaction conditions optimized in terms of hydrophobicity and workability for cellulose fibers are studied. Furthermore, polypropylene containing surface-modified cellulose fibers was prepared to compare physical properties by fiber content and study optimized content.

• 한국생산제조학회지
• /
• 제4권3호
• /
• pp.25-30
• /
• 1995

A new finishing process, magnetic-electrolytic-abrasive polishing(MEAP), combining Lorentz' force effect in the traditional electrolytic finishing process was developed to realize the high efficiency as well as high surface quality of finishing . The paper describes the theoretical basis about the modification of electrolytic ions motion by the magnetic field. The effect of magnetic field on the electrolytic process was discussed was and analyzed from the result of model test.