• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.6
• /
• pp.793-799
• /
• 2016

A multi-purpose sensor interface that provides dual-mode operation of fingerprint sensing and physiological signal detection is presented. The dual-mode sensing capability is achieved by utilizing inter-pixel shielding patterns as capacitive amplifier's input electrodes. A prototype readout circuit including a fingerprint panel for feasibility verification was fabricated in a $0.18{\mu}m$ CMOS process. A single-channel readout circuit was implemented and multiplexed to scan two-dimensional fingerprint pixels, where adaptive calibration capability against pixel-capacitance variations was also implemented. Feasibility of the proposed multi-purpose interface was experimentally verified keeping low-power consumption less than 1.9 mW under a 3.3 V supply.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.1
• /
• pp.11-21
• /
• 2008

Biometrics-based user authentication has several advantages over traditional password-based systems for standalone authentication applications. This is also true for new authentication architectures known as crypto-biometric systems, where cryptography and biometrics are merged to achieve high security and user convenience at the same time. Recently, a cryptographic construct, called fuzzy vault, has been proposed for crypto-biometric systems. This construct aims to secure critical data(e.g., secret key) with the fingerprint data in a way that only the authorized user can access the secret by providing the valid fingerprint, and some implementations results for fingerprint have been reported. However, the previous results had some limitation of the provided security due to the limited numbers of chaff data fer hiding real fingerprint data. In this paper, we propose an approach to provide both the automatic alignment of fingerprint data and higher security by using a 3D geometric hash table. Based on the experimental results, we confirm that the proposed approach of using the 3D geometric hash table with the idea of the fuzzy vault can perform the fingerprint verification securely even with more chaff data included.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.9
• /
• pp.801-805
• /
• 2012

This paper proposes dynamic thresholding scheme for fingerprint identification. As a user authentication method by fingerprint recognition technology, verification method based on 1:1 matching was mainly used in the past, but identification method based on 1:N matching is generally used recently. The control of the value of FAR is very important in the application areas such as access control and time attendance systems. This paper proposes dynamic thresholding scheme which could properly control the value of FAR according to the field of applications and size of the fingerprints database.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.4
• /
• pp.256-265
• /
• 2003

To improve reliability and practicality, a fingerprint-based biometric system needs to be robust to rotations of an input fingerprint and the processing speed should be fast. Accordingly, this paper presents a new filterbank-based fingerprint feature extraction and matching method that is robust to diverse rotations and reasonably fast. The proposed method fast extracts fingerprint features using a directional filter bank, which effectively decomposes an image into several subband outputs Since matching is also performed rapidly based on the Euclidean distance between the corresponding feature vectors, the overall processing speed is so fast. To make the system robust to rotations, the proposed method generates a set of feature vectors considering various rotations of an input fingerprint and then matches these feature vectors with the enrolled single template feature vector. Experimental results demonstrated the high speed of the proposed method in feature extraction and matching, along with a comparable verification accuracy to that of other leading techniques.

• Journal of IKEEE
• /
• v.19 no.4
• /
• pp.610-616
• /
• 2015

In this paper, an electronic ID system satisfying security requirements of authentication certificate was designed using fingerprint recognition. The proposed electronic ID system generates a digital signature with forgery prevention, confidentiality, content integrity, and personal identification (=non-repudiation) using fingerprint information, and also encrypts, sends, and verify it. The proposed electronic ID system exploits fingerprint instead of user password, so it avoids leakage and hijacking. And it provides same legal force as conventional authentication certificate. The proposed electronic ID consists of 4 modules, i.e. HSM device, verification server, CA server, and RA client. Prototypes of all modules are designed and verified to have correct operation.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.1
• /
• pp.55-66
• /
• 2021

In this paper, we propose a signal propagation modeling technique for generating a positioning fingerprint DB based on Long Term Evolution (LTE) signals. When a DB is created based on the location-based signal information collected in an urban area, gaps in the DB due to uncollected areas occur. The spatial interpolation method for filling the gaps has limitations. In addition, the existing gap filling technique through signal propagation modeling does not reflect the signal attenuation characteristics according to directions occurring in urban areas by considering only the signal attenuation characteristics according to distance. To solve this problem, this paper proposes a Deep Neural Network (DNN)-based signal propagation functionalization technique that considers distance and direction together. To verify the performance of this technique, an experiment was conducted in Seocho-gu, Seoul. Based on the acquired signals, signal propagation characteristics were modeled for each method, and Root Mean Squared Errors (RMSE) was calculated using the verification data to perform comparative analysis. As a result, it was shown that the proposed technique is improved by about 4.284 dBm compared to the existing signal propagation model. Through this, it can be confirmed that the DNN-based signal propagation model proposed in this paper is excellent in performance, and it is expected that the positioning performance will be improved based on the fingerprint DB generated through it.

• Proceedings of the IEEK Conference
• /
• 2002.06c
• /
• pp.131-134
• /
• 2002

As the increased use of computer, wired/wireless/mobile Internet, security in using Internet becomes a more important problem. Thus, biometric technology using physical and behavior characteristics of a person is hot issue. Many different types of biometric technologies of a person such as fingerprint, face, iris, vein, DNA, brain wave, palm, voice, dynamic signature, etc. had already been studied but remained unsuccessful because they do not meet social demands. However, recently many of these technologies have been actively revived and researchers have developed new products on various commercial fields. Dynamic signature verification technology is to verify the signer by calculating his writing manner, speed, angle, and the number of strokes, order, the down/up/movement of pen when the signer input his signature with an electronic pen for his authentication. Then signature verification system collects mentioned above various feature information and compares it with the original one and simultaneously analyzes to decide whether signature is forgery or true. The prospect of signature verification technology is very promising and its use will be wide spread in terms of economy, security, practicality, stability and convenience.

• Journal of the Korean Society of Safety
• /
• v.14 no.4
• /
• pp.204-210
• /
• 1999

We propose an optical fingerprint identification system using volume hologram for database of matched filter. Matched filters in VanderLugt correlator are recorded into a volume hologram that can store data with high density, transfer them with high speed, and select a randomly chosen data element. The multiple reference fingerprint photographs of database are prerecorded in a photorefractive material in the form of Fourier transform images, simply by passing the image displayed in a spatial light modulator through a Fourier transform lens. The angular multiplexing method for multiple holograms of database is achieved by controlling the reference directions with a step motor. Experimental results show that the proposed system can be used for secure entry systems to identify individuals for access to a restricted area, security verification of credit cards, passports, and other IDs.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.521-524
• /
• 2005

This paper proposes a fusion algorithm which merges multiple vein pattern images into a single image, larger than those images. As a preprocessing step of template matching, during the verification of biometric data such as fingerprint image, vein pattern image of hand, etc., the fusion technique is used to make reference image larger than the candidate images in order to enhance the matching performance. In this paper, a new algorithm, called BSA (Boundary Stitching Algorithm) is proposed, in which the boundary rectilinear parts extracted from the candidate images are stitched to the reference image in order to enlarge its matching space. By applying BSA to practical vein pattern verification system, its verification rate was increased by about 10%.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.5
• /
• pp.1-8
• /
• 2000

Point pattern matching schemes for finger print recognition do not guarantee robust matching performance for fingerprint Images of poor quality We present a finger print recognition scheme, where transformation parameters of matched ridge pairs are estimated by Hough transform and the matching hypothesis is verified by a new measure of the matching degree using selective directional information Proposed method may exhibit extremely low FAR(False accept rate) while maintaining low reject rate even for the Images of poor quality because of the robustness to the variation of minutia points.