• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.4
• /
• pp.323-329
• /
• 2004

In situ particle size and volume concentration of suspended sediment was measured at the mouth of Seomjin River Estuary In February 2001, using an optical instrument, 'LISST-100'. Time variation of in situ particle size and concentration shows: (1) during ebb tide, Seomjin River supplies relatively fine-grained particles with less-fluctuated, compared to during flood tide, and well-behaved concentrations following the tidal cycle; and (2) during flood tide, relatively coarse-grained particles with highly variable in size distribution and concentration flow upstream from Kwangyang Bay. This explains a poor correlation $(r^{2}=0.10)$ between sediment concentration and beam attenuation coefficient during flood and a high degree of correlation $(r^{2}=0.80)$ during ebb tide. Relatively fine grained and well defined, monotonous size distribution may promote the correlation between concentration and beam attenuation coefficient due to optical homogeneity of particles during ebb tide. Abundance of large aggregates with time-varying size and shape distributions may be mainly responsible for variations in optical properties of the sediment during flood tide, and thus may confound the relationship between the two variables. The difference in particle sizes and shapes between flood and ebb tides can also be observed on SEM images.

• Progress in Superconductivity and Cryogenics
• /
• v.22 no.2
• /
• pp.7-11
• /
• 2020

When rivers and lakes are contaminated with numerous contaminants, usually the contaminants are finally deposited on the sediments of the waterbody. Many clean up technologies have been developed for the contaminated sediments. Among several technologies dredging is one of the best methods because dredging removes all the contaminated sediments from the water and the contaminated sediments can be completely treated with physical and chemical methods. However the most worried phenomenon is suspension of fine particles during the dredging process. The suspended particle can release contaminants into water and resulted in spread of the contaminants and the increase of risk due to the resuspension of the precipitated contaminants such as heavy metals and toxic organic compounds. Therefore the success of the dredging process depends on the prevention of resuspension of fine particles. Advanced dredging processes employ pumping the sediment with water onto a ship and release the turbid water pumped with sediment into waterbody after collection of sediment solids. Before release of the turbid water into lake or river, just a few minutes allowed to precipitate the suspended particle due to the limited area on a dredging ship. However the fine particle cannot be removed by the gravitational settling over a few minutes. Environmental technology such as coagulation and precipitation could be applied for the settling of fine particles. However, the process needs coagulants and big settling tanks. For the quick settling of the fine particles suspended during dredging process magnetic separation has been tested in current study. Magnetic force increased the settling velocity and the increased settling process can reduce the volume of settling tank usually located in a ship for dredging. The magnetic assisted settling also decreased the heavy metal release through the turbid water by precipitating highly contaminated particles with magnetic force.

• Ocean Systems Engineering
• /
• v.2 no.4
• /
• pp.289-295
• /
• 2012

Assume fluid eddy viscosity in the vertical direction is parabolic. Sediment particles diffuse with the given fluid eddy viscosity. However, when the vertical diffusion coefficient profile is computed from the suspended sediment concentration profile, the coefficient shows lager values than the fluid mixing coefficient values. This trend was explained by using two sizes of sediment particles. When fine sediment particles like wash load are added in water column the sediment mixing coefficient looks much larger than the fluid mixing coefficient.

• Journal of Environmental Science International
• /
• v.8 no.5
• /
• pp.593-600
• /
• 1999

In order to determine the changes of sediment facies and metal levels in surface sediments after the construction of Shiwha Lake, surface sediments were sampled at 8 sites located on the main channel monthly from June, 1995 to August, 1996 and analysed for 12 metals (Al, Fe, Mn, V, Cr, Co, Ni, Cu, Zn, Cd, As and Pb) by ICP/AES and ICP/MS. Two groups of sampling sites(the inner lake with 3 sites and the outer lake with 5 sites) are subdivided by the surface morphology ; the inner lake is a shallow channel area with a gentle slope, while the outer lake is relatively deep and wide channel with a steep slope which has many small distributaries. After the construction of dam, fine terrestrial materials were deposited near the outer lake, which resulted in the change of major sediment facies from sandy silt to mud. With the deposition of fine sediments in the outer lake, anoxic water column induced the formation of sulfide compounds with Cu, Cd, Zn and part of Pb. Metal (Cr, Ni, Cu, Zn and Cd) contents in sediments increased up to twice within 2 years after the construction of dam. This is due to the direct input of industrial and municipal wastes into the lake and the accumulation of metals within the lake. In addition, frequent resuspension of contaminated sediments in a shallow part of the lake may make metal-enriched materials transport near the outer lake with fine terrestrial materials. As the enrichment of Cu, Zn, Cd and part of Pb in the Shiwha Lake may be related to the formation of unstable sulfide compounds by sulfate reduction in anoxic water or sediment column, the effect of mixing with open coastal seawater is discussed.

• Journal of Korea Water Resources Association
• /
• v.49 no.1
• /
• pp.73-81
• /
• 2016

This study investigates the development of lower channels and sediment sorting processes in the vegetated channels with the mixed sediment. The sediment discharges fluctuate with time and decrease with vegetation density. The bed changes with irregular patterns, and the sediment particles in the vegetated zone at the surface of bed are fine. The dimensionless geometric mean decreases with vegetation density. The fine sediment particles are trapped by vegetation, and the bed between main steam and vegetated zone increases. Moreover, the particle sizes are distributed irregularly near the zone. The hiding functions decrease with dimensionless particle size. However, the functions increase with vegetation density, which is confirmed by decreasing sediment discharge with vegetation. The lower channel is stable and the migration decreases in the condition of $0.5tems/cm^2$. However, the migration of the lower channel in the condition of $0.7stems/cm^2$ increases due to the increased sinuosity and new generated channels in the sedimentated vegetation zone.

• Journal of The Geomorphological Association of Korea
• /
• v.23 no.2
• /
• pp.29-45
• /
• 2016

Chemical composition of fine sediments from Jeongdongjin area are analyzed with XRF method. The results are compared with previously reported results of sandstones of the nearest Simgok port. The weight percentage of $SiO_2$ of the samples are far lower than those of sandstones of Simgok. It is supposed to be happened by the selective elution of $SiO_2$ from the sediment layer of coastal terrace, as there's no evidence of selective input or precipitation of other elements from outside. As a result of chemical alteration or weathering of sediment at coastal terrace, weight percentage of $Al_2O_3$ and $Fe_2O_3$ of samples show far higher values than those of Simgok sandstone. In addition, the relative portion of $Al_2O_3$ and $Fe_2O_3$ are decreased to upward within outcrop of terrace sediment layers. It could be caused by the chemical weathering progress with time. However Chemical Index of alteration(CIA) of sediment samples are no larger than 90 and it could be interpreted that it would take over 100ka for total weathering of sediment in this area. Meanwhile the ratio of $SiO_2/Al2O_3$ of terrace sediment showed as 3.48~6.0 and it is far smaller than those of Simgok sandstones(23.9~49.0). The ratio of $SiO_2/Fe_2O_3$ of terrace sediment(19.19~55.85) showed similar pattern with $SiO_2/Al2O_3$ (Simgok sanstone: 119.6~601.8). The ratios have a weak trend of decreasing upwards within the outcrop, there also a huge difference in value among the samples. Chemical composition of reddish brown and gray layers which suspected as the result of psudogleization reveals that reddish brown parts have higher concentration of $Fe_2O_3$ than other parts, while there was no significant difference in concentration of $Al_2O_3$ and CaO.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.393-398
• /
• 2005

Suspended fine mineral particles are deposited at the areas with low flow velocity and low transportation capacity in rivers, reservoirs and lakes. It can be contaminated by heavy metals. Examples of problem fields art dredging of sediment, water pollutants, and maintenance of navigation channels and construction works. To deal with the settling problems it is necessary to understand tile physico-chemical characteristics of cohesive sediment under varying density of particle and ion addition(NaOH, HCl, NaCl), which is dissolved in river, because fine-grained cohesive sediment can lead to flocculation with the physico-chemical influences and takes different characteristics. Experiments with fresh and saline water are followed with fine-grained sediments(alumina and quartz) in settling columns. Settling velocity of suspended fine particles in still water was measured with a pressure sensor(maximum 10 mbar). Until the initial concentration of 20,000 mg/1 of alumina and quartz the settling velocity was on the increase. Above this initial concentration was it on the decrease. In an acid condition, which causes strong flocculation, average settling velocity of quartz powder was high. In an alkaline water low average settling velocity of it was observed. However, alumina behaved exactly contrarily.

• Journal of Marine Life Science
• /
• v.3 no.1
• /
• pp.38-43
• /
• 2018

The polychaetes are the dominant species in the benthic communities, and play an important role in improving the sediment quality through the action of ingesting organic materials. We evaluated the improvement ability of rockworm Marphysa sanguinea for the removal of organic matter. We used the three types of sediment (S1: coarse sand, S2: fine sand, S3: muddy sand), and analyzed TOC of seawater and sediment. Rockworm was effective in eliminating organic matter in the three types of sediment and the larger the particle, the higher the removal rate. Removal ability of rockworm for organic matter in sediment were calculated with 3.9856 ppm g^-1d^-1 in coarse sand, 2.8021 ppm g^-1d^-1 in fine sand, and 28.1142 ppm g^-1d^-1 in muddy sand. The results show that rockworm contributes to the removal of organic matter in the various sediment types.

• Water Engineering Research
• /
• v.5 no.2
• /
• pp.55-68
• /
• 2004

The GLEAMS (Groundwater Loading Effects of Agricultural Management System, version 3.0) water quality model was used to predict hydrology and water quality and to evaluate the effects of soil types from a cattle-grazed pasture field of Bermuda-Rye grass rotation with poultry litter application as a fertilizer in North Alabama. The model was applied and evaluated by using four years (1999-2002) of field-measured data to compare the simulated results for the 2.71- ha Summerford watershed. $R^2$ values between observed and simulated runoff, sediment yields, TN, and TP were 0.91, 0.86, 0.95, and 0.69, respectively. EI (Efficiency Index) of these parameters were 0.86, 0.67, 0.70, and 0.48, respectively. The statistical parameters indicated that GLEAMS provided a reasonable estimation of the runoff, sediment yield, and nutrient losses at the studied watershed. The soil infiltration rates were compared with the rainfall events. Only high intensity rainfall events generated runoff from the watershed. The measured and predicted infiltration rates were higher during dry soil conditions than wet soil conditions. The ratio of runoff to precipitation was ranging from 2.2% to 8.8% with average of 4.3%. This shows that the project site had high infiltration and evapotranspiration which generated the low runoff. The ratio of runoff to precipitation according to soil types by the GLEAMS model appeared that Sa (Sequatchie fine sandy loam) soil type was higher and Wc (Waynesboro fine sandy loam, severely eroded rolling phase) soil type relatively lower than the weighted average of the soil types in the watershed. The model under-predicted runoff, sediment yields, TN, and TP in Wb (Waynesboro fine sandy loam, eroded undulating phase) and Wc soil types. General tendency of the predicted data was similar for all soil types. The model predicted the highest runoff in Sa soil type by 105% of the weighted average and the lowest runoff in Wc soil type by 87% of the weighted average

• Journal of Korean Society on Water Environment
• /
• v.34 no.1
• /
• pp.84-95
• /
• 2018

The community structure of benthic macroinvertebrates in the fine sediments of freshwater was analyzed according to various sampling tools and methods. The sediment core with the inner diameter of 7.5 cm was more effective in cost and labor in comparison to that of ${\Phi}5cm$ or ${\Phi}10cm$. The number of species increased with the increase in sample size (replicates). When it was collected five times with the ${\Phi}7.5cm$ sediment core, Shannon-Weaver's diversity and McNaughton's dominance of the sample reached about the 80 % level of the community estimates. Most species appeared in the sediment layer of 0-4 cm, and there were no newly recruited species below the depth of 4 cm. Individual abundance of benthic macroinvertebrates decreased exponentially along with the increase in sediment depth. Compared with the individual abundance of the 0-15 cm sediment layer, the abundance was 60 % in the 0-2 cm layer, 25 % in the 2-4 cm layer, 10 % in the 4-6 cm layer and 95 % in the 0-6 cm layer. Compared with organisms collected with the sieve of 0.2 mm pore, the number of species and the individual abundance sifted through the sieve with pore of 1 mm were 36 % and 88 %, and those with pore of 0.5 mm were 5 % and 55 %, respectively.