• 제목/요약/키워드: fine particle size

검색결과 938건 처리시간 0.031초

물 세척한 예천지역 화강풍화토의 입자분리와 입도분포 변화 특성 (Change in the Characteristics of Particle Separation and Particle Size Distribution of Weathered Granite Soil from the Yecheon Area (Eastern South Korea) after Water Washing)

  • 김석주
    • 지질공학
    • /
    • 제32권2호
    • /
    • pp.241-255
    • /
    • 2022
  • 본 연구에서는 예천지역의 화강풍화토에 대하여 KS F 2302의 체 분석 방법과 규정에 준하여 체분석 시험을 수행하고, 물 세척시 발생되는 흙의 입자분리와 입도분포 변화의 특성을 비교 분석하였다. 광학현미경에 의한 영상이미지 분석결과 흙입자가 물에 의해 더 작은 입자로 분리됨을 확인하였고 입도분포곡선의 변화를 5가지 지표값으로 산출한 결과 세립분(0.075 mm)의 증가량은 13.67%, 임의 입경(0.25 mm)의 증가량은 19.44%, 입도분포곡선의 최대통과율폭(BM)은 #30 체에서 21.08%가 증가되었고 입도분포곡선의 이동면적(A)은 69.28%·mm로 분석되었으며 평균입경(D50)은 0.663 mm가 감소되었다. 이러한 결과는 물 세척을 수행하는 것이 세립토의 함량이 실제보다 과소평가 되는 것을 막을 수 있는 효과적인 방법임을 의미한다.

1994년 수도권 지역에서의 시정과 미세 입자상물질 화학조성과의 관계해석 (Chemical Composition of Fine Aerosol Associated with Visibility Degradation in Seoul Metropolitan Area in 1994)

  • 한진석;김병곤;김신도
    • 한국대기환경학회지
    • /
    • 제12권4호
    • /
    • pp.377-387
    • /
    • 1996
  • This study was carried out to monitor the visibility including measurement and analysis of the various parameters such as particle size distribution, chemical composition, and meteorotical conditions to understand the characteristics and causes of this phenomenon. According to the analysis of intensive sampling, $SO_4^{2-}, NO-3^-, Cl^-, NH_4^+$ ion concentration increased together with the mass concentration around 1 $\mu$m in the case of low visibility. $(NH_4)_2SO_4, NH_4NO_3$, and $NH_4Cl$ were thought to be the major components of fine particles. The statistical analysis showed that the scattering effect of particle was 81.2%, the absorption effect was 14.9%. Therefore, these effects were the major factors to reduce the visibility. In conclusion, the visibility was reduced by the fine particle of sulfate (18.6%), nitrate (14.2%), organic carbon (10.8%), element carbon (25.8%), and residual (24.8%) during this study.

  • PDF

입자 저감 및 pH가 ATO (안티몬도핑 산화주석)의 분산 특성에 미치는 영향 (The Effects of Size Reduction and pH on Dispersion Characteristics of ATO (Antimony-Doped Tin Oxide))

  • 김진훈;정의경;이상헌;한원희;이영석
    • 공업화학
    • /
    • 제21권3호
    • /
    • pp.311-316
    • /
    • 2010
  • 본 연구는 높은 분산 안정성을 유지하는 antimony-doped tin oxide (ATO) 분산액을 제조하기 위하여, 습식 볼밀법으로 분쇄시간에 따른 ATO의 입자크기, 입도분포, 분산성의 변화를 고찰하였다. 또한 각각의 습식 볼밀 처리된 ATO 분산액의 pH를 변화시켜 ATO 분산액의 분산 특성을 고찰하였다. 습식 볼밀 분쇄 조건에 의하여 ATO의 입자크기 및 입도 분포 변화는 레이저회절 입도분석기와 주사전자현미경을 이용하여 평가하였고, 습식 볼밀 분쇄 시간 및 pH조건에 따른 ATO 입자의 분산성은 제타전위 측정법과 다중광산란(multiple light scattering)법을 이용하여 평가하였다. 분쇄 조건 중 60 min 동안 처리된 ATO 입자 크기는 30% 이하로 작아지고, $1{\sim}35{\mu}m$에서 $0.1{\sim}5{\mu}m$로 입도분포를 갖는 균일한 입자를 얻을 수 있었다. 그러나 분쇄조건을 60 min 이상 처리한 것은 역분쇄 및 재응집 현상의 발생으로 인하여 한계 분쇄 시간이 나타나는 것을 알 수 있었다. 이러한 결과로부터 ATO 분산액은 습식 볼밀 분쇄 시간을 증가시킬수록 입자 크기가 감소하고 표면 에너지가 증가하여 입자간의 반발력이 커지게 됨을 알 수 있었고, 또한 용액의 pH를 증가시킬수록 입자의 표면 이온화도가 커짐으로 인하여 ATO 분산액의 분산성이 향상되는 것을 알 수 있었다.

1994년 6월 서울지역 시정장애의 측정 및 분석 (Measurement and Analysis of Visibility lmpairment during June, 1994 in Seoul)

  • 백남준;이종훈;김용표;문길주
    • 한국대기환경학회지
    • /
    • 제12권4호
    • /
    • pp.407-419
    • /
    • 1996
  • Characteristics of visual air quality in Seoul have been investigated between June 13 and 21, 1994. Optical properties (extinction coefficient and particle scattering coefficient), meteorological parameters (relative humidity, temperature, wind speed, wind direction, and cloud cover), particle characteristics (mass size distribution, components) were measured and analyzed. During measurement periods, northwest wind with less than 2m/sec of wind speed deteriorates visibility. Effects of relative humidity are though to be not a direct factor which influence to visibility through the size change due to hygroscopic species in aerosol. During the smoggy period both the aerosol mass concentration and fine particle fraction of the size distribution are increased compared to the clear period. Sulfate, organic carbon, and elemental carbon in aerosol are the major species in determining the occurrence and severity of a smog in Seoul.

  • PDF

Effect of Inclusion of Hard Versus Soft Wheat Bran with Different Particle Size on Diet Digestibility, Growth Performance and Carcass Traits of Fattening Rabbits

  • Laudadio, V.;Dario, M.;Addonizio, F.;Tufarelli, Vincenzo
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제22권10호
    • /
    • pp.1377-1385
    • /
    • 2009
  • Effect of inclusion of hard vs. soft wheat bran with different particle size on diet digestibility, growth performance and some slaughter traits was evaluated in fattening rabbits. Four isonitrogenous and isocaloric diets were used according to the origin of wheat bran (hard (HWB) - Triticum durum - and soft (SWB) - Triticum aestivum) combined with wheat bran particle size sieved by 2 mm (fine: 2) or by 8 mm (coarse: 8) in a bifactorial (2${\times}$2) study. A growth trial was conducted to measure the effect of treatments on performance in one hundred and twenty New Zealand White${\times}$Californian rabbits fed experimental diets from 50 to 87 days of age. Faecal apparent digestibility was determined within the last week in twenty animals per diet. Digestibility of nutrients was higher (p<0.05) in the diet containing HWB2, except for crude protein, ether extract and ash, than fine and coarse soft wheat bran diets. Final live weight, feed intake and feed consumption of rabbits on the diet with fine hard wheat bran were higher and resulted in greater daily weight gains (p<0.01) than for animals on the other diets. The slaughter yield and percentage value of organs were not significantly (p>0.05) affected by the diets fed; however, the diet containing fine hard wheat bran led to lower (p<0.05) percentages of skin, abdominal fat and carcass drip loss than the other dietary treatments. It is concluded that fine hard wheat bran can be better included in the diet than soft wheat bran to maximize growth performance without affecting carcass traits of fattening rabbits.

화장품용 미분체 혼합공정에서의 분산특성 연구 (A Study of Mixing Characteristics for Cosmetic Pine Powder)

  • 이종옥;송건응
    • 대한화장품학회지
    • /
    • 제19권1호
    • /
    • pp.85-107
    • /
    • 1993
  • 화장품에 사용되는 미분체의 혼합특성을 알기 위하여 화장품용 미분체 혼합기인 ribbon mixer, powder mixer micropulverizer, fine impact mill에 미립자, 구상 및 판상의 형태를 가진 bulk powders를 혼합시간을 변화 시키면서 혼합하는 실험을 하였다. 혼합분체의 혼합정도를 평가하기 위하여 산화철을 tracer로 사용하였으며, 원료 및 혼합물의 particle size distribution, specific surface area, density 및 표면색상을 측정하였다. 미분체 혼합물의 혼합시간과 표면색상변화, 입도분포 및 비표면적과의 사이에 대수적 1차 상관관계가 성립되었고, 색상의 변화로부터 혼합정도를 평가할 수 있는 간단한 식을 도출하였다. 사용된 혼합기에 대해 혼합기구별 modelling과 혼합에 따른 입도 분포 및 비표면적의 변화로부터 혼합기 impellar tip에서의 linear velocity별 혼합기는 대류혼합, 전단혼합 및 확산혼합으로 분류되었다.

  • PDF

The Effect of Particle Size on Combustion Characteristics of Pulverized High-Volatile Bituminous Coal

  • Kim, Hyung-Taek;Jeon, Heung-Shin;Wongee Chun
    • 에너지공학
    • /
    • 제6권2호
    • /
    • pp.162-169
    • /
    • 1997
  • The particle size effect on the combustion characteristics of pulverized coal was investigated in the cylindrical-shape, horizontal furnace, fired in the range of 8.8∼10.6 kw. Three differently-sized fractions (5, 30, and 44 microns in average diameter) of high-volatile bituminous coal, were burned in the test furnace. Burnout behavior of pulverized coal flame were determined through the measurement of stable species concentrations (CO$_2$and H$_2$O). Concentrations of CO$_2$were compared with the theoretical values and the result showed good agreement. Thermal behavior of pulverized coal flame were determined as maximum flame temperatures occurred at fuel-rich conditions in every case. Flame lengths were also determined by decreasing with the particle size decrease. The flame length of the fine sized coal sample was comparable to that produced by distillate oil. The color of the coal flames ranged from orange to yellow, with the flame of the fine size fraction being brighter and yellower than the others.

  • PDF

Particle Size Distribution of Heavy Metals in the Urban Air of Seoul, Korea

  • Sohn, Dong-Hun;Heo, Moon-Young;Kang, Choon-Won
    • Archives of Pharmacal Research
    • /
    • 제12권3호
    • /
    • pp.214-218
    • /
    • 1989
  • Atmospheric particulate matters (A. P. M. ) were collected on quartz-fiber filters from March 1985 to May 1986, using the Andersen high-volume air sampler and contents of six heavy metals (Fe, Mn, Cu, Zn, Pb Ni) in the A. P. M. were determined by atomic absorption spectrophotometry. These heavy metals were divided into the three groups with respect to their particle size distribution. Fe and Mn were mainly associated with coarse particles (diameter > 2.0 $\mu$m), but Pb and Ni were related fine particles (diameter < 2.0 $\mu$m). Cu and Zn had mized size distributions in both of them. In the seasonal variation of heavy metals, the contents of Fe and Mn in spring and Ni and Pb in winter were higher than any other season. There were high mutual correlation between Fe and Mn coarse particles, and between Pb and Ni in fine particles.

  • PDF

Manufacture of Ultra Fine CuO Powder from Waste Copper Chloride Solution by Spray Pyrolysis Process

  • Yu, Jae-Keun;Ahn, Zou-Sam;Sohn, Jin-Gun
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
    • /
    • pp.165-170
    • /
    • 2001
  • The main purpose of this study is to generate a fine copper oxide powder of high purity, with a compact structure and a uniform particle size by a spray pyrolysis process. The raw material is a waste copper chloride solution formed in the manufacturing process of Print Circuit Board (PCB). This study also examines the influences of various factors on the properties of the generated powder. These factors include the reaction temperature, the inflow speed of the raw material solution, the inflow speed of the air, the size of the nozzle tip, and the concentration of the raw material solution. It is discovered that, as the reaction temperature increases from 80$0^{\circ}C$ to 100$0^{\circ}C$ , the particle size of the generated powder increases accordingly, and that the structure of the powder becomes much more compact. When the reaction temperature is 100$0^{\circ}C$, the particle size of the generated powder increases as the concentration of copper in the raw material solution increases to 40g/l, decreases as the concentration increases up to 120g/l, and increases again as the concentration reaches 200g/1. In the case of a lower concentration of the raw material solution, the generated powder appears largely in the form of CuO. As the concentration increases, however, the powder appears largely in the form of CuCl. When the concentration of copper in the raw material solution is 120g/1, the particle size of the generated powder increases as the inflow speed of the raw material solution increases. When the concentration of copper in the raw material solution is 120g/1, there is no evident change in the particle size of the generated powder as the size of the nozzle tip and the air pressure increases. When the concentration is 40g/1, however, the particle size keeps increasing until the air pressure increases to 0.5kg/$\textrm{cm}^2$, but decreases remarkably as the air pressure exceeds 0.5kg/$\textrm{cm}^2$.

  • PDF

충돌확률 모델에 의한 미립 몰리브덴광의 부유선별 효율 향상 연구 (Investigation on the Enhancement of the Flotation Performance in Fine Molybdenum Particles Based on the Probability of Collision Model)

  • 양지수;유경근;서주범;한성수
    • 자원리싸이클링
    • /
    • 제33권3호
    • /
    • pp.38-47
    • /
    • 2024
  • 몰리브데나이트는 몰리브덴의 주요 광물자원으로 고유의 소수성 표면으로 인해 부유선별을 통해 회수된다. 한편, 채광되는 몰리브데나이트의 결정크기 및 품위가 낮아지고 있다. 이로 인해, 단체분리에 요구되는 광물 크기가 작아짐으로써, 부유선별에 투입되는 원광 크기 또한 미립화되고 있다. 미립자는 기포와의 충돌확률이 낮아, 부유선별할 때 효율 감소를 유발시킨다. 이에 따라, 몰리브덴 확보를 위해서는 미립 몰리브데나이트에 대한 부유선별 연구가 필요한 실정이다. 본 연구에서는 5-30 ㎛의 미립 몰리브데나이트의 부유선별 효율을 향상시킬 수 있는 방안을 제안하였다. 기포크기 축소와 입자응집을 통한 효율 증진으로 접근하였다. 기포-입자 충돌확률을 시뮬레이션과 부유선별 실험을 통해, 미립자의 부유선별 효율이 향상될 수 있는 기포크기 및 입자응집체 크기에 대한 범위를 정량적으로 결정하였다. 결과적으로 본 연구에서 제공한 미립 몰리브덴광 부유선별 조건은 향후 몰리브덴 선광 플랜트의 부유선별 공정을 향상시키는 데 활용될 예정이다.