• 대한치과보철학회지
• /
• 제29권2호
• /
• pp.1-16
• /
• 1991

In order to see the possible effect of the functional load-bearing after osseointegration of the titanium root form implant in dog a histologic study was conducted. One side of lower jaw was surgically prepared edentulousness and titanium implants were inserted. Some implants were functionally loaded through fixed detachable prosthesis and some are isolated and unloaded. The dog was sacrificed four months later and bone sections with implants were processed for histologic evaluation and the results were as follows ; (1) The bone to implant interface after four months of load bearing presented no mobility and no marginal bone loss radiographically and histologically. (2) The interface zone between compact bone and implant revealed a direct bone to implant contact and in some areas marrow tissue contacts were examined at the light microscopic level. (3) At the ultrastructural level the interface of surrounding compact bone matrix and implant, three types of superficial layers were found ; one with moderate electron dense amorphous granular substance layer, other with high electron dense fine granular substance layer, and another type of amorphous granular substance covered with high electron dense line of minute granules. (4) The osteoblasts in the marrow tissue neighboring implants and osteocytes in compact bone showed typical normal characteristics and in the marrow tissues some of lymphocytes and mast cells were observed. (5) The abscence of abnormal tissue reactions at a cellular level indicates a high degree of biocompatibility for the experimental titanium implant and basically no difference was found between functionally loaded and unloaded implants.

• Asian Journal of Atmospheric Environment
• /
• 제9권3호
• /
• pp.228-235
• /
• 2015

In order to clarify the thermal and hygroscopic properties of indoor particulate matter (PM) in a semiclosed subway space, which is critically important for understanding of the distinctive particle formation processes as well as the assessment of their health effects, the size-resolved PMs (i.e., $PM_{2.5}$ and $PM_{10-2.5}$) were intensively collected on the platform of Miasageori station on the Seoul Subway Line-4. The elemental concentrations in soluble and insoluble fractions were determined by PIXE from the bulkily pretreated $PM_{2.5}$. The thermal and hygroscopic characteristics of individual particles were investigated via a combination of the unique pretreatment techniques (i.e., the high-temperature rapid thermal process and the water dialysis) and SEM-EDX analysis. Iron and calcium were unequaled in insoluble and soluble $PM_{2.5}$ fractions, respectively, with overwhelming concentration. The SEM-EDX's elemental net-counts for the pre- and post-pyrolyzed PMs newly suggest that magnesium and several elements (i.e., silica, aluminum, and calcium) may be readily involved in the newly generated subway fine PM by a high-temperature thermal processing when trains are breaking and starting. Through the water dialysis technique, it turned out that calcium has meaningful amount of water soluble fraction. Furthermore, the concentrations of the counter-ions associated with the calcium in subway $PM_{10-2.5}$ were theoretically estimated.

• 한국통신학회논문지
• /
• 제34권3C호
• /
• pp.329-340
• /
• 2009

본 논문에서는 이진천이반송파 (binary offset carrier, BOC) 변조된 확산신호의 부호동기추적에 적합한 기법을 제안한다. 이진천이반송파 변조된 확산신호의 상관함수는 정확한 상관옵셋에서 나타나는 주첨두와 여러 부첨두를 갖고 있다. 다중 경로 채널환경에서 가시신호에 비해 다중경로신호는 항상 지연되어 수신되기 때문에 여러 부침두 가운데 정확한 상관옵셋보다 이른 상관옵셋 영역에 있는 상관함수는 늦은 상관옵셋영역에 있는 상관함수에 비해 덜 왜곡된다. 본 논문에서는 이 특징을 활용해 BOC(n,n) 변조된 확산신호의 부호추적에 적합한 이른영역상관(advanced region correlation, ARC) 기법을 제안한다. 그리고 모의실험을 통해 안정된 다중경로 (static multipath) 채널과 지상이동체위성시스템 (land mobile satellite system) 채널에서 기존과 제안한 기법의 부호동기 추적성능을 비교한다. 또한 BOC(pn,n) 변조된 확산신호에 적합한 이른영역상관 기법의 확장 형태인 일반화된 이른영역상관기법 (generalized-ARC, G-ARC) 제안하고, 모의실험을 통해 그 성능을 보인다.

• 한국의류학회지
• /
• 제33권2호
• /
• pp.187-199
• /
• 2009

Recently, the quality and design of the children's wear is being improved remarkably. Following the trend, the need for the research on the pattern making of children's wear is growing. At first, we tried to find out how the industry is doing the pattern making job through interview. Results are as follows. The target age ranges from 5 to 11 years old. For the sample size of pattern making, 7 years of age is preferred. It is not usual to develop the design pattern from the bodice block pattern. Instead, they use middle block pattern for each item, such as blouse, shirt, pants, skirt or jacket. Starting from these middle block pattern, they prepare individual designs. With the results, the aim of the research became to develop one of most frequently used middle block pattern. The blouse block pattern was selected for that purpose. To look into the existing patterns, we selected 4 methods, i.e. NM-method, T-method, O-method, E-methods. Theses patterns were compared through wearing test for the evaluation of comfort and fit using trial garments. The results indicated the NM-method was best among them. Specially waist line position, shoulder shape and size allowance was adequate. Alteration and adjustment of pattern draft was made onto the NM-method. Allowances for the bust circumference, across chest, across back and depth of arm was adjusted for better comfort as well as fine fit. Sidelines of the bodice and the underarm seam of the sleeves were curved for styling. After another wearing test, the final pattern was suggested as a blouse block pattern for 7 years old girl.

• Asian Journal of Atmospheric Environment
• /
• 제5권1호
• /
• pp.8-20
• /
• 2011

Atmospheric visibility is one of the indicators used to evaluate the status of air quality. Based on a conceptual definition of visibility as the maximum distance at which the outline of the selected target can be recognized, an image analysis technique is introduced here and an algorithm is developed for visibility monitoring. Although there are various measurement techniques, ranging from bulk and precise instruments to naked eye observation techniques, each has their own limitations. In this study, a series of image analysis techniques were introduced and examined for in-situ application. An imaging system was built up using a digital camera and was installed on the study sites in Incheon and Seoul separately. Visual range was also monitored by using a dual technology visibility sensor in Incheon and transmissometer in Seoul simultaneously. The Sobel mask filter was applied to detect the edge lines of objects by extracting the high frequency from the digital image. The root mean square (RMS) index of variation among the pixels in the image was substantially correlated with the visual ranges in Incheon and Seoul with correlations of $R^2$=0.88 and $R^2$=0.71, respectively. The regression line equations between the visual range and the RMS index in Incheon and Seoul were VR=$2.36e^{0.46{\times}(RMS)}$ and VR=$3.18e^{0.15{\times}(RMS)}$, respectively. It was also confirmed that the fine particles ($PM_{2.5}$) have more impacts to the impairment of visibility than coarse particles.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.480-480
• /
• 2000

In this paper, we proposed a fuzzy-neuro controller to control the speed of wound rotor induction motor with slip energy recovery. The speed is limited at some range of sub-synchronous speed of the rotating magnetic field. Control speed by adjusting resistance value in the rotor circuit that occurs the efficiency of power are reduced, because of the slip energy is lost when it passes through the rotor resistance. The control system is designed to maintain efficiency of motor. Recently, the emergence of artificial neural networks has made it conductive to integrate fuzzy controllers and neural models for the development of fuzzy control systems, Fuzzy-neuro controller has been designed by integrating two neural network models with a basic fuzzy logic controller. Using the back propagation algorithm, the first neural network is trained as a plant emulator and the second neural network is used as a compensator for the basic fuzzy controller to improve its performance on-line. The function of the neural network plant emulator is to provide the correct error signal at the output of the neural fuzzy compensator without the need for any mathematical modeling of the plant. The difficulty of fine-tuning the scale factors and formulating the correct control rules in a basic fuzzy controller may be reduced using the proposed scheme. The scheme is applied to the control speed of a wound rotor induction motor process. The control system is designed to maintain efficiency of motor and compensate power factor of system. That is: the proposed controller gives the controlled system by keeping the speed constant and the good transient response without overshoot can be obtained.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.162-165
• /
• 2007

Chlorophyll concentration is an important factor for physical oceanography as well as biological oceanography. For these necessity many oceanographic researchers have been investigated it for a long time. But investigation using vessel is very inefficient, on the other hands, ocean color remote sensing is a powerful means to get fine-scale (spatial and temporal scale) measurements of chlorophyll concentration. Geostationary Ocean Color Imager (GOCI), for ocean color sensor, loaded on COMS (Communication, Ocean and Meteorological Satellite), will be launched on late 2008 in Korea. According to the necessity of algorithm for GOCI, we developed chlorophyll algorithm for GOCI in this study. There are two types of chlorophyll algorithms. One is an empirical algorithm using band ratio, and the other one is a fluorescence-based algorithms. To develop GOCI chlorophyll algorithm empirically we used bands centered at 412 nm, 443 nm and 555 nm for the DOM absorption, chlorophyll maximum absorption and for absorption of suspended solid material respectively. For the fluorescence-based algorithm we analyzed in-situ remote sensing reflectance $(R_{rs})$ data using baseline method. Fluorescence Line Height $({\Delta}Flu)$ calculated from $R_{rs}$ at bands centered on 681 nm and 688 nm, and ${\Delta}Flu_{(area)}$ are used for development of algorithm. As a result ${\Delta}Flu_{(area)}$ method leads the best fitting for squared correlation coefficient $(R^2)$.

• 한국의류학회지
• /
• 제17권1호
• /
• pp.103-117
• /
• 1993

The purpose of this study is to clarify the adaptation of beauty of traditional dress depicted contemporary Korean fashion design. For this purpose, the external form and the internal meaning based on 'the double roots' proposed by W$\ddot{o}$lfflin were analyzed in Korean traditional dress. Documentary studies and objective studies were done with descriptive and content analytic methods. And homospatial process was devised in order to develop the traditional identity in contemporary fashion design. The results were as follows: 1. As the external form, H. O. A silhouette, chogori, ch'ima, paji, and po concerning internal type, kaftan, flat form related to structured type were represented. Traditional color sense were love of white, contrasting as well as analogous color harmony shown often in nature phenomena, and temperate achromatic color harmony. Texture were characterized as rough and coarse expressing vividness, fine and smooth expressing delicateness and tenderness. As the internal meaning, the beauty of purity related to nature, tragedy, and symbolism were represented. 2. Since 1980's. Korean fashion designers frequently applied unstructural kaftan form and H silhouette to Korean fashion design, and sought natural and pliable line in whole dress. Use of white and achromatic color harmony as well as use of linnen were prominent. Designers' aesthetic consciousness was pursuit of the beauty of nature. Representative designers who concentrated on expressing traditional beauty were Lee Shinwoo, Sul Yoonhyung, Jin Taiok and others. 3. A homospatial process could be a method in the creative design which enables to express Korean identity in fashion design, and could suggest ideas of new designs full of Korean identity by superimposed and fused imaginery.

• 패션비즈니스
• /
• 제6권1호
• /
• pp.53-70
• /
• 2002

The purpose of this study is to review the innovation of Vidal Sassoon's hair design. His hair styling was created in 1950-60, and it was related to the Zeitgeist, 'Convulsion'. It was aesthetic reform that eliminated artificially of headdress through new design concept and high technique. It was social renovation that changed women's life through freedom, ease and mobility of hair form. Also, it was scientific innovation that emphasized improvement of hair care. Therefore this researcher set a high value on his contribution in beauty industry, and studied the formative characteristics of his hair styling. The results are as follows: The formative characteristics are classified into the simplicity of form, the mobility of construction, and the variety of color and texture. 1. The simplicity of form showed through geometric form. Vidal Sassoon's hair design had the overthrow traditional concept of femininity and beauty; in addition, it conferred freedom on not only hair itself but also women's action. 2. The naturalism and mobility of construction was found in layered and softly swinging hair made up by skillful cutting technique. It was developed by studying on the dynamism of sports in 1984 LA Olympic games. 3. The variety of color and texture showed conspicuously its visual evidence because of the simplicity of form. Especially, he borrowed factors of fine art, that is to say, form, space, texture, line, color and light, and created a performance art. His work is analyzed into an art, and he is one of the best artists.

• 설비공학논문집
• /
• 제22권10호
• /
• pp.679-686
• /
• 2010

A proprietary device is adopted to break out the membrane of cell in the rigid polyurethane foam. As it is known, the membrane of cell is hardly tearing-off thoroughly in a mechanical way due to both its elastic characteristic and micro sized pores. In this study, a novel experimental approach is introduced to burst out all gases inside the cells of the rigid polyurethane foam by abrasively grinding micro-cells completely into fine powder. The biggest advantage of this approach is to be capable of releasing all gases out from the cell even in the micro pores. As clearly reflected from the repeatability, the accuracy of the result is highly improved and high confidence in the data sets as well. For the measurements of not only gas composition but partial pressure for each gas simultaneously as well, a precision gas mass spectrometer is used in-line directly to the abrasive grinding device. To control the starting point of the polyurethane foam, all samples were prepared on site in the laboratory. Manufactured time is one of the most critical factors in characterization of cell gas composition because it is known that one of gas composition, especially, carbon dioxide, is diffused out dramatically in a short period of time as soon as it is foamed.