• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.926-928
• /
• 1998

A fast optimization algorithm has been evolved from a simple two stage optimal power flow(OPF) algorithm for constrained power economic dispatch. In the proposed algorithm, we consider various constraints such as power balance, generation capacity, transmission line capacity, transmission losses, security equality, and security inequality constraints. The proposed algorithm consists of four stages. At the first stage, we solve the aggregated problem that is the crude classical economic dispatch problem without considering transmission losses. An initial solution is obtained by the aggregation concept in which the solution satisfies the power balance equations and generation capacity constraints. Then, after load flow analysis, the transmission losses of an initial generation setting are matched by the slack bus generator that produces power with the cheapest cost. At the second stage we consider transmission losses. Formulation of the second stage becomes classical economic dispatch problem involving the transmission losses, which are distributed to all generators. Once a feasible solution is obtained from the second stage, transmission capacity and other violations are checked and corrected locally and quickly at the third stage. The fourth stage fine tunes the solution of the third stage to reach a real minimum. The proposed approach speeds up the coupled LP based OPF method to an average gain of 53.13 for IEEE 30, 57, and 118 bus systems and EPRI Scenario systems A through D testings.

• Wind and Structures
• /
• v.13 no.6
• /
• pp.519-528
• /
• 2010

A meteorological model, RAMS, and a commercial computational fluid dynamics (CFD) model, FLUENT are combined as a one-way off-line nested modeling system, namely, RAMS/FLUENT system. The system is experimentally applied in the wind simulation over a complex terrain, with which numerical simulations of wind field over Foyeding weather station located in the northwest mountainous area of Beijing metropolis are performed. The results show that the method of combining a meteorological model and a CFD model as a modeling system is reasonable. In RAMS/FLUENT system, more realistic boundary conditions are provided for FLUENT rather than idealized vertical wind profiles, and the finite volume method (FVM) of FLUENT ensures the capability of the modeling system on describing complex terrain in the simulation. Thus, RAMS/FLUENT can provide fine-scale realistic wind data over complex terrains.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.2
• /
• pp.33-38
• /
• 2010

To survive head-to-head competition, we should keep our labor productivities above those of other nations. However, our labor productivities are low compared to those of the developed countries. It is the well-known fact that we make up for the productivities with long work hours. Entering the line of developed nations safely and enjoying well-being age freely, we need to achieve high labor productivities without sacrificing work hours. What would be a fine solution? Back to the basics! Although it is important to enforce R&D on high-tech products, we should have so-called bluebird philosophy, being faithful to the basics and trying to find solutions at a stone's throw. Basics of basics may be unceasing improvement, establishing reasonable standard times, and maintaining them. To support going back to the basics, this thesis proposes VITAMAX, a motion and time study software. As VITAMAX stands for "Visual Improvement and Time Analysis for Maximizing Profits", it provides a simple and powerful visual tool which is useful for improving manual works and determining standard times. Since VITAMAX is based on the Microsoft Excel and VBA, it is very cost-effective and easy to use. VITAMAX may contribute to the profit increase of manufacturing companies, especially for the small and medium-sized enterprise.

• The Korean Journal of Zoology
• /
• v.30 no.4
• /
• pp.351-370
• /
• 1987

This experiment has been done in order to study the correlation between the ultrastructure changes and the atresia phenomenon of the follicles in porcine ovary. The ovaries were assorted according to the presence or absence of corpus luteum. Thereafter, the follicles were classified into normal, pyknotic, necrotic and cystic groups by atretic characteristics on the histological observation, and then their ultrastructures were examined with an electron microscope. The results were as followings. 1. In normal group, granulosa cells represented the ultrastructural characteristics of protein-synthesizing cells. Since the initiation of atresia, the line structure of granulosa cells showed many of the characteristic features of steroid-secreting cells, followed by gradual pyknosis. 2. In necrotic group of the ovary without corpus luteum, the theca interns became hypertrophic and displayed the ultrastructural features of active steroidsecreting cells. But this phenomenon was not seen in the follicles of the ovary with corpus luteum. 3. Degenerative changes of cumulus cells were similar to those of granulosa cells, and the degenerating oocytes showed the degeneration of cellular organelles, cytoplasmic vacuolization and disappearance of microvilli on the surface. The degeneration of granulosa cells tended to procede that of oocytecumulus complex in the follicles of the ovary having no corpus luteum, but this tendency was reversed in the case of presence of corpus luteum. In conclusion, it may be unable to identi(y the initiation of follicular atresia

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.847-849
• /
• 1996

As the power demands increases, one of the most important data is inside electric field of equipment in designing of insulators ami insulated wire for EHV distribution line. So far finite element analysis method is widely used to calculate this electric field. However as the shape of insulator becomes complicated, it is difficult in producing the mesh which suitable the shape. Especially, we have many difficulty that produce dense fine mesh only where the electric field is concentrated. Therefore in this paper, we perform the each conditional analysis of electric field using the Maxwell 3D Simulator to recover this defects. And we try to analyze electric field through the conventional 2 dimensional and 3 dimensional analysis in case of salt contamination on the surface of a insulator.

• Design & Manufacturing
• /
• v.11 no.2
• /
• pp.20-24
• /
• 2017

Recent industrial developments are constantly advancing, and rapid technological development is demanding high technology level in related fields. The need for polishing is increasing even more to improve quality. In order to improve the surface quality, the final finishing process or polishing process is a very important part. Research on super precise polishing method using MR fluid is actively being carried out in domestic and foreign countries. Fine magnetic abrasive grains are aligned in the direction of a magnetic force line formed by a magnetic field and serve as a brush to polish a metal surface. This method has the advantage that the shape of the tool is not fixed and is not affected by the shape of the workpiece or the machining area. We will design the electromagnets for the MR polish polishing system and apply the magnetic field analysis using the magnetic field analysis program (ANSYS). The data obtained through this process suggests an efficient method to increase the magnetic flux density important for polishing. We will investigate the influence of the Al6061-T6 specimen on the surface of the MR polishing machine based on the optimized design.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.107-108
• /
• 2007

Overhead transmission lines are completely exposed to the environment. This causes faults in transmission lines due to natural environmental conditions. In some cases, transmission towers are damaged by typhoons and snow, as well as sleet on the transmission lines. It takes a lot of time to repair the damaged towers. For emergency restoration purposes, steel poles are installed to temporarily supply power. Before 2003, emergency restoration steel poles were made of angled steel, which required a large number of beams, bolts, etc. In addition, the foundation of the steel pole and ground wire was constructed using excavation and burial methods, therefore it required a lot of manpower and time to construct temporary transmission lines. In September 2003, typhoon Maemi, whose maximum wind speed was 60m/s, hit Korea. 'Maemi' destroyed transmission lines in the Busan and Geojea area, causing long blackouts. To reduce the recovery time to the damaged transmission lines, self-build based emergency towers were developed. self-build based emergency towers reduced recovery time from 24 hours to 4 hours or less. However, the self-build based emergency tower had no arms, so the temporary transmission lines could only be constructed without curves in line routes. In this paper, solving these self-build based emergency tower limitations, using insulated arms(designed for use with the self-build based emergency tower), shall be explained.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.132-133
• /
• 2006

PRAM (phase-change random access memory)은 전류 펄스 인가에 따른 기록매질의 비정질-결정질 간 상변화와 그에 동반되는 저항변화를 이용하는 차세대 비휘발성 메모리 소자로서 연구되어지고 있다. 본 논문에서는 $(GeTe)_x(Sb_2Te_3)$ pseudobinary line을 따르는 조성(x=0.5, 1, 2, 8)의 벌크 및 박막시료를 제작하고 원자-스케일의 구조적 상변화를 분석하였다. 열증착을 이용하여 Si 기판위에 200nm 두께의 박막을 형성, 질소분위기 하에서 100-450도 범위에서 열처리 하였다. XRD를 통해 열처리 온도에 따른 구조적 분석을 실시하였다. x=8의 조성을 제외한 전체 박막에 대해 열처리 온도 증가에 따라 fcc와 hexagonal 구조가 순차적으로 나타났으며 일부에서는 혼종의 상구조를 보였다. 특히, $Ge_2Sb_2Te_5$ 박막에 대하여 EXAFS (extended x-ray absorption fine structure) 및 XPS를 이용하여 상변화의 원자-스케일 구조분석을 하였다.

• Journal of Welding and Joining
• /
• v.23 no.5
• /
• pp.61-68
• /
• 2005

Dissimilar joining of Al 6013-T4 alloys and austenite stainless steel was carried out using friction stir welding technique. Microstructures near the weld zone and mechanical properties of the joint have been investigated. Microstructures in the stainless steel side were composed of the heat affected zone and the plastically deformed zone, while those in the Al alloy side were composed of the recrystallized zone including stainless steel particles, the thermo-mechanically affected zone and the heat affected zone. TEM micrographs revealed that the interface region was composed of the mixed layers of elongated stainless steel and ultra-fine grained Al alloy with lamella structure and intermetallic compound layer. Thickness of the intermetallic layer was approximately 300nm and was identified as the A14Fe with hexagonal close packed structure. Mechanical properties, such as tensile and fatigue strengths were lower than those of 6013 Al alloy base metal, because tool inserting location was deviated to Al alloy from the butt line, which resulted in the lack of the stirring.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.627-631
• /
• 2005

In this study, low fatigue behavior of laser welded sheet metal were investigated. Before welding, the cross section of butt joint was prepared only by fine shearing without milling process. Specimens were same sheet metal and welding condition that using automobile manufacturing company at present. Butt joint of cold rolled sheet metal was welded by $CO_2$ laser. It is used that welding condition such as laser welding speed was 5.5m/sec and laser output power was 5kW for 0.8mm and 1.2mm sheet metal. The laser weldments were machined same or different thickness and same or different material. In order to mechanical properties of around welding zone, hardness test was performed. Hardness of welding bead is about 2 times greater than base material. We performed the low cycle fatigue tests for obtaining fatigue properties about thickness and the weld line direction of specimen. The results of strain controlled low cycle fatigue test indicate that all specimens occur cyclic softening, as indicated by the decrease in stress to reach a prescribed strain.