• 한국측량학회지
• /
• 제15권1호
• /
• pp.51-61
• /
• 1997

전지구 해양의 조석 분포를 파악하기 위해 $1/3^\circ$의 분해능을 갖는 2차원 수치모형을 수립하여 반일분조$(M_2,\;S_2,\;K_2,\;N_2)$ 및 일분조$(K_1,\;O_1,\;P_1,\;Q_1)$의 조석도를 작성하였다. 수립된 $1/3^\circ$ 수치모형은 기존 수치모형에서 낮은 분해능으로 인하여 평가하지 못하였던 천해역 및 육붕해에서의 조석현상을 평가하는데 적용되었다 작성된 조석도는 기존의 수치모형 및 위성 고도계 자료로부터 작성된 조석도와 또, 심해의 일부 지역에서 관측된 조화상수와 상호 비교하였다. 세격자망에 의해 계산된 전지구 해양의 조석도는 위성을 통해 관측된 순간 해면 자료로부터 조석성분을 제거하여 시간에 따라 변화하지 않는 해면변위를 산정하는데 있어 유용한 자료로 이용될 수 있다.

• 대한원격탐사학회지
• /
• 제37권6_2호
• /
• pp.1891-1900
• /
• 2021

직경 2.5 ㎛ 이하인 초미세먼지는 급격한 도시화와 인구 증가로 인해 대도시에서 많이 발생하며, 유아 및 청소년기는 성인에 비해 초미세먼지에 취약하고 만성 질환으로 이어질 가능성이 높다. 특히 대부분의 청소년들은 학교에서 가장 많은 시간을 보내고 있으며, 다양한 이유에 의해 실외에서 발생한 초미세먼지가 실내로 유입된다. 본 연구는 외부 요인에 의해 발생하는 학교 초미세먼지를 예측하고 학교별 초미세먼지 범주화를 수행하였다. 10-fold cross validation과 grid-search method를 적용한 random forest (RF) 모델에 화학과 기상 인자, 위성 기반의 aerosol optical depth (AOD)를 입력 자료로 하여 학교 초미세먼지를 예측하고 정확도 평가를 위해 4가지 통계 지표를 이용하였다. 학교 미세먼지 범주화를 위해 6가지 유형을 가진 느슨한 기준과 엄격한 기준을 정의하였으며, 범주화 결과 느슨한 기준의 경우 유형 2와 3에, 엄격한 기준의 경우 유형 3과 4에 가장 많은 학교가 포함되었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권5호
• /
• pp.1339-1355
• /
• 2023

Localization is a hot research spot for many areas, especially in the mobile robot field. Due to the weak signal of the global positioning system (GPS), the alternative schemes in an indoor environment include wireless signal transmitting and receiving solutions, laser rangefinder to build a map followed by a re-localization stage and visual positioning methods, etc. Among all wireless signal positioning techniques, Wi-Fi is the most common one. Wi-Fi access points are installed in most indoor areas of human activities, and smart devices equipped with Wi-Fi modules can be seen everywhere. However, the localization of a mobile robot using a Wi-Fi scheme usually lacks orientation information. Besides, the distance error is large because of indoor signal interference. Another research direction that mainly refers to laser sensors is to actively detect the environment and achieve positioning. An occupancy grid map is built by using the simultaneous localization and mapping (SLAM) method when the mobile robot enters the indoor environment for the first time. When the robot enters the environment again, it can localize itself according to the known map. Nevertheless, this scheme only works effectively based on the prerequisite that those areas have salient geometrical features. If the areas have similar scanning structures, such as a long corridor or similar rooms, the traditional methods always fail. To address the weakness of the above two methods, this work proposes a coarse-to-fine paradigm and an improved localization algorithm that utilizes Wi-Fi to assist the robot localization in a geometrically similar environment. Firstly, a grid map is built by using laser SLAM. Secondly, a fingerprint database is built in the offline phase. Then, the RSSI values are achieved in the localization stage to get a coarse localization. Finally, an improved particle filter method based on the Wi-Fi signal values is proposed to realize a fine localization. Experimental results show that our approach is effective and robust for both global localization and the kidnapped robot problem. The localization success rate reaches 97.33%, while the traditional method always fails.

• 대한조선학회논문집
• /
• 제42권6호
• /
• pp.583-592
• /
• 2005

The turbulent free surface flow around a self-propelled KRISO 138K LNG Carrier is numerically simulated using the finite volume based multi-block RANS code, WAVIS developed at HRISO. The realizable k-$\varepsilon$ turbulence model with a wail function is employed for the turbulence closure. The free surface is captured with the Level-Set method and body forces are used to model the effects of a propeller without resolving the detail blade flow. In order to obtain an accurate free surface solution and stable convergence, the computations are executed with a proper fine grid refinement around the free surface and with an adoption of implicit discretization scheme for the Level-Set formulation. The computed velocity vectors at the several stations and wave patterns show a good agreement with the experimental results measured at the KRISO towing tank.

• 한국작물학회지
• /
• 제34권3호
• /
• pp.261-269
• /
• 1989

종관기상자료만으로 충족시킬 수 없는 농업분야 국지기상정보 수요에 대처하기 위해 지형기후 관계식에 의거한 제주도 전역의 정밀기후 추정 및 표출방법을 개발하였다. 먼저 도전역을 250m 간격의 직교격자로 구획하고 교차점의 해발고도를 지형도상에서 판독하여 사방 1km 지역(단위격자)의 평균해발고도, 평균경사도, 그리고 평균 경사방향 등 지형내자를 계산, 정량화하였다. 18개의 기존 및 신설 기상관측소가 위치한 단위격자의 지형 인자값과 실제 관측된 일최저기온값을 중회귀분석하여 지형일기온 관계식을 도출하고 이로부터 미관측 격자에 대하여 주정치를 계산하였다. 구체적으로 겨울철 일최저기온에 대하여 3개의 전형적인 기압계 유형별로 최적 추정식을 만들어 해안지대에 위치한 제주 및 서귀포 관측자료와 기압계 유형판별만으로 도전역의 일최저온 분포 예측을 가능케 하였다.

• 대한기계학회논문집B
• /
• 제23권8호
• /
• pp.1063-1071
• /
• 1999

Fine grid calculations are reported for the developing turbulent flow in a curved duct of square cross-section with a radius of curvature to hydraulic diameter ratio ${\delta}=Rc/D_H=3.357 $ and a bend angle of 720 deg. A sequence of modeling refinements is introduced; the replacement of wall function by a fine mesh across the sublayer and a low Reynolds number algebraic second moment closure up to the near wall sublayer in which the non-linear return to isotropy model and the cubic-quasi-isotropy model for the pressure strain are adopted; and the introduction of a multiple source model for the exact dissipation rate equation. Each refinement is shown to lead to an appreciable improvement in the agreement between measurement and computation.

• Ocean and Polar Research
• /
• 제23권2호
• /
• pp.195-203
• /
• 2001

A fine-grid (3 km ${\times}$ 3 km), three-dimensional nowcast system of sea levels, currents, temperature, and salinity is being developed for the Taiwan Strait. The project takes a balanced approach relying equally on models and observations, will have the capacity of real-time data assimilation, and is aimed at both practical and scientific applications. To determine boundary conditions and verify model results, eight coastal tide-gauge stations were first established along both sides of the strait. Strait-wide hydrographic surveys were conducted by research vessels. Currents are being measured using bottom-mounted ADCP moorings in a meridional deep channel off southwest Taiwan and along a traverse section in the central part of the strait. In addition to a fine-resolution three-dimensional model of the Taiwan Strait, an adjoint model and a larger-domain two-dimensional model were used to better determine boundary conditions in the northern and southern boundaries of the strait. In the first stage of model development, barotropic tides were successfully simulated in a hindcast mode. The protocol product has been released to general public, including government agencies, universities and general users.

• 마이크로전자및패키징학회지
• /
• 제17권4호
• /
• pp.73-76
• /
• 2010

A two-facet approach was used to investigate the parametric performance of functional high-speed DDR3 (Double Data Rate) DRAM (Dynamic Random Access Memory) die placed in different types of BGA (Ball Grid Array) packages: wire-bonded BGA (FBGA, Fine Ball Grid Array), flip-chip (FCBGA) and lead-bonded $microBGA^{(R)}$. In the first section, packaged live DDR3 die were tested using automatic test equipment using high-resolution shmoo plots. It was found that the best timing and voltage margin was obtained using the lead-bonded microBGA, followed by the wire-bonded FBGA with the FCBGA exhibiting the worst performance of the three types tested. In particular the flip-chip packaged devices exhibited reduced operating voltage margin. In the second part of this work a test system was designed and constructed to mimic the electrical environment of the data bus in a PC's CPU-Memory subsystem that used a single DIMM (Dual In Line Memory Module) socket in point-to-point and point-to-two-point configurations. The emulation system was used to examine signal integrity for system-level operation at speeds in excess of 6 Gb/pin/sec in order to assess the frequency extensibility of the signal-carrying path of the microBGA considered for future high-speed DRAM packaging. The analyzed signal path was driven from either end of the data bus by a GaAs laser driver capable of operation beyond 10 GHz. Eye diagrams were measured using a high speed sampling oscilloscope with a pulse generator providing a pseudo-random bit sequence stimulus for the laser drivers. The memory controller was emulated using a circuit implemented on a BGA interposer employing the laser driver while the active DRAM was modeled using the same type of laser driver mounted to the DIMM module. A custom silicon loading die was designed and fabricated and placed into the microBGA packages that were attached to an instrumented DIMM module. It was found that 6.6 Gb/sec/pin operation appears feasible in both point to point and point to two point configurations when the input capacitance is limited to 2pF.

• 한국정보시스템학회지:정보시스템연구
• /
• 제27권2호
• /
• pp.95-114
• /
• 2018

Purpose The recent concern over environmental problems such as greenhouse gas emission and fine dust contributes increasing interest in renewable energies. However the intrinsic characteristics of renewable energies, intermittent and stochastic generation, might cause serious problems to the stability and controllability of power grid. Therefore countermeasures such as virtual power plant (VPP) must be prepared in advance of the spread of uncontrollable distributed renewable energy resources to be one of major energy sources. Design/methodology/approach This study deals with the design concept of the VPP platform. we proposed as a technology solution for achieving the stability of power grid by guaranteeing a single power profile combining multiple distributed power sources with ICT. The core characteristics of VPP should be able to participate in the grid operation by responding to operation instructions from the system operator, KPX, as well as the wholesale electricity market. Findings Therefore this study includes energy storage device(ESS) as a controllable component as well as renewable energy resources such as photovoltaic and wind power generation. Based on this configuration, we discussed core element technologies of VPP and protype design of VPP solution platform according to system requirements. In the proposed solution platform, UX design for the integrated control center and brokerage system were included as well as ancillary service function to respond to KPX's operation instruction with utilizing the capability of ESS. In addition, a simulator was suggested to verify the VPP operations.

• 대한조선학회논문집
• /
• 제51권5호
• /
• pp.409-418
• /
• 2014

Simulation of flow past a complex marine structure requires a fine resolution in the vicinity of the structure, whereas a coarse resolution is enough far away from it. Therefore, a lot of grid cells may be wasted, when a simple Cartesian grid system is used for an Immersed Boundary Method (IBM). To alleviate this problems while maintaining the Cartesian frame work, we adopted an Adaptive Mesh Refinement (AMR) scheme where the grid system dynamically and locally refines as needed. In this study, We implemented a moving IBM and an AMR technique in our basic 3D incompressible Navier-Stokes solver. A Volume Of Fluid (VOF) method was used to effectively treat the free surface, and a recently developed Lagrangian Dynamic Subgrid-scale Model (LDSM) was incorporated in the code for accurate turbulence modeling. To capture vortex induced vibration accurately, the equation for the structure movement and the governing equations for fluid flow were solved at the same time implicitly. Also, We have developed an interface by using AutoLISP, which can properly distribute marker particles for IBM, compute the geometrical information of the object, and transfer it to the solver for the main simulation. To verify our numerical methodology, our results were compared with other authors' numerical and experimental results for the benchmark problems, revealing excellent agreement. Using the verified code, we investigated the following cases. (1) simulating flow around a floating sphere. (2) simulating flow past a marine structure.