• Korean Journal of Human Ecology
• /
• v.20 no.6
• /
• pp.1229-1237
• /
• 2011

The objective of this study was to evaluate the quality characteristics of Cheongpomook prepared with five different levels of mungbean powder (0, 25, 50, 75, and 100%). We conducted the Hunter's color values, the rheological characteristics, sensory evaluations, and pasting properties of the Cheongpomook samples. The more mungbean powder was added, the more the luminance and Hunter's a values of Cheongpomook samples were decreased, but in Hunter's a values was reverse. With regard to the rheological properties of the Cheongpomook samples, the more mungbean powder was added, the values of hardness, springiness, gumminess, and chewiness were significantly decreased. In color, taste, and overall quality, the value of 25% mungbean powder added Cheongpomook (MP1) and 50% added Cheongpomook (MP2) were significantly higher than those of others. The resulting RVA viscogram, peak viscosity, hold viscosity, break down, setback, and final viscosity of Cheongpomook were decreased with an increase in mungbean powder, but the pasting temperature was increased slightly. Therefore, an addition of 25% mungbean powder appears to be an acceptable approach to enhance the quality of Cheongpomook without reducing acceptability.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.329-329
• /
• 2017

The study was conducted to investigate the effects of different harvesting time on pasting properties of starch in three colored rices. Seven major parameters of starch pasting properties, peak viscosity (PKV), hot pasting viscosity (HPV), cool pasting viscosity (CPV), setback (CPV minus PKV), breakdown (PKV minus HPV), peak time, and pasting time were determined by Rapid Visco Analyzer. The peak viscosity, hot viscosity, cool viscosity and peak time were influenced by different harvesting times. Pasting time was delayed slightly with prolonged harvesting time in all rice cultivars. Pasting temperature in each rice cultivar differed from each harvesting time, and pasting temperature of the two rice cultivars, Hongjinju and Joseongheugchal, showed the highest at the 40 days after heading and then it decreased at the final harvesting time. With the delay of the harvesting time, peak viscosity, hot viscosity, cool viscosity, setback value and pasting temperature did not exhibit a regular trend depending on their genetic characteristics. Branch chain length distribution of amylopectin was demonstrated a distinct difference among these colored rices. In changes of amylopectin branch chain-length distribution, the amylopectin structure of Hongjinju rice cultivar as affected by different harvesting time, the shortest chain length of amylopectin in rice starch harvested at 20 days after heading was characterized by the significant increase in A chains with $DP{\geq}12$ and remarked decrease in long chains $37{\leq}DP$ compared to that of 30, 40, and 50 days after heading. In particular, when harvesting time is delayed the distribution percentage of short chain (A chains with $DP{\geq}12$) was increased except for the rice which harvested 20 days after heading. The similar results were also observed in Sintoheugmi rice cultivar like that of Hongjinju rice cultivar. Otherwise, distribution percentage of the shortest chain length of amylopectin in rice starch harvested at 20 days after heading was characterized by the significant decrease in A chains with $DP{\geq}12$ and remarked increase in B chains $13{\leq}DP{\geq}24$ compared to that of 30, 40, and 50 days after heading.

• The Korean Journal of Food And Nutrition
• /
• v.20 no.2
• /
• pp.164-172
• /
• 2007

The purpose of this study was to investigate the properties of yellow layer cake made with bamboo leaf powder. Physical properties of the medium and cake flour with bamboo leaf powder were tested by falling number, farinogram, alveogram and after making yellow layer cake, which were tested by rheometer and water activity etc. We found that falling numbers increased with addition of bamboo leaf powder and adding bamboo leaf powder to the flour decreased peak viscosity, holding strength, final viscosity etc. The p value of the alveogram increased for the flour containing bamboo leaf powder increased, but development time and stability decreased. The water activity of the yellow layer cakes made with bamboo leaf powder decreased during storage, but they did not show significant differences. The results of the sensory test showed that the 3% of addition of bamboo leaf powder had the best scores.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.147-155
• /
• 2016

Pulp made from sugarcane bagasse (SCB) was bleached in element chlorine free (ECF) sequence. The peroxide bleaching process for the final bleaching process has been introduced in order to reduce the use of chlorine dioxide. Prior to peroxide bleaching, different chelating chemicals were applied. When 4.5% of the total chlorine dioxide was used, bleached SCB pulp using additional DTPA chelate stage (DEDQP) resulted in 87.0% of the ISO brightness. However, bleached pulp using simultaneous stage of DTPA chelate and chlorine dioxide (DE(DQ)P) was reached at 83.9% of the ISO brightness. The viscosity of DEDQP bleached pulp was 25.6 cPs, and the one of DE(DQ)P bleached pulp was 21.9 cPs. Decreasing of chelate effect by chlorine dioxide led to a decrease in the final brightness and a lower viscosity. But simultaneous stage of EDTA chelate and chlorine dioxide (DE(DQ)P) led to higher final brightness (87.0% ISO) and higher viscosity (25.8 cPs) than those of the $DEDQ_{EDTA}P$ bleached pulp (86.4% ISO, 25.2 cPs).

• The Korean Journal of Food And Nutrition
• /
• v.25 no.4
• /
• pp.706-712
• /
• 2012

The effects of barnyard millet (Echinochloa spp.) content (10~30%) on wheat flour dough and noodle properties were investigated. As the amount of barnyard millet increased, the particle size and ash content of mixed flour increased, while lightness tended to decrease. The gelatinization characteristics of millet flour showed higher peak viscosity, holding strength, final viscosity, and setback compared with wheat flour. There was significant positive correlation between protein content and sedimentation volume, as well as between protein content and water absorption. As the amount of barnyard millet increased, hardness, springiness and cohesiveness of wet noodles tended to decrease. From the results of sensory evaluation, composite flours (addition up to 20% barnyard millet) were rated with a quality score for taste and overall acceptance which was comparable with the control flour.

• Korean Journal of Food Science and Technology
• /
• v.40 no.3
• /
• pp.290-296
• /
• 2008

This study examined the physicochemical properties of chemically and enzymatically cross-modified waxy rice starches. The waxy rice starch was cross-linked using phosphorous oxychloride, and then partially hydrolyzed with four commercial ${\alpha}$-amylases (Fungamyl, Termamyl, Liquozyme, Kleistase). Swelling power and the moisture sorption isotherm did not change with cross-modification. Two cross-modified waxy rice starches (hydrolyzed with Termamyl and Liquozyme) showed higher solubilities than native starch and the two other cross-modified starches (hydrolyzed with Fungamyl and Kleistase). In terms of RVA characteristics, the two cross-modified waxy rice starches hydrolyzed with Termamyl and Liquozyme, respectively, had lower peak viscosity, holding strength, and final viscosity than the native starch. However, the two starches hydrolyzed with Fungamyl and Kleistase, respectively, revealed higher peak viscosity, holding strength, and final viscosity than the native starch. No differences were displayed in the X-ray diffraction patterns and DSC thermal characteristics of the cross-modified waxy rice starch as compared to both the native and cross-linked starches, indicating that cross-linking and enzymatic hydrolysis occurred in the amorphous region and did not alter the crystalline region.

• Korean Journal of Food Science and Technology
• /
• v.32 no.1
• /
• pp.140-146
• /
• 2000

The physicochemical properties, such as retrogradation, fat acidity and viscosity, on the pine nut's gruel at various contents of pine nut (0, 1, 3 and 5%) during storage at 4, 25 and $40^{\circ}C$ were investigated. The degree of retrogradation was increased rapidly at the initial storage stage. The lowest value (about 10%) of the degree of retrogradation was observed in the gruel sample containing 3% of pine nut. Also, the rate constant of retrogradation was showed the lowest value (0.0422) in the gruel containing 3% of pine nut regardless of storage temperatures. The fat acidity was showed the lower value than 30 mg KOH in all samples. The viscosity increasing velocity(RVU/min) between holding strength and final viscosity was decreased as the pine nut's content was increased. However, it was not affected by the storage temperatures.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.5 no.2
• /
• pp.114-118
• /
• 2005

Recently, in order to guarantee the quality of the final product from the production line, several equipments able to examine the polymer ingredients' quality are being used. Rheotruder is one of the equipments manufactured to measure the viscosity of the ingredient that is an important factor for the quality of final product. However, Rheotruder has nonlinear characteristics such as time delay which make systematic analysis difficult. In this paper, in order to enhance the performance of Rheotruder, a new scheme is introduced. It incorporates TDNN (Time Delay Neural Network) bank and Elman network to get a right decision on whether the tested ingredient is good or not. Furthermore, the proposed scheme is verified through real test execution.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.23 no.2
• /
• pp.59-75
• /
• 2005

In gravure printing, the amount of ink from cells has a great effect on the qualities of final printed products. And printability of final products is determined by every kinds variables. Ink transfer process is not verified scientifically because gravure cell is of small size and print speed is rapid. Therefore in order to study of ink transfer mechanism, this study is using the Computational Fluid Dynamics Evaluation. Polyflow 3-10 simulation software is used for considering of non-Newtonian flow. Among the various factors, this study have dealt with gravure cell types used computer simulation in order to define distinctive features in ink flow and transfer. The results of simulation, it defined the distribution of pressure, speed, stream function, viscosity, shear rate during the gravure printing. It is fined out the difficulties and characteristics according to the shape of cell types. Through this study, the condition of gravure printing is depending on the print condition and characteristic of cells.

• Textile Coloration and Finishing
• /
• v.15 no.5
• /
• pp.321-326
• /
• 2003

In order for disperse dye based ink to be fitted with the critical requirements of ink jet printing, this study was undertaken to investigate the effects of 6 different dispersants on the milling efficiency of insoluble dye particles and dispersion stability of the final ink. It was found that a polystyrene dispersant with high molecular weight exerted relatively better dispersion stability which may be associated with its steric stabilization effect in the ink solution.