• Title/Summary/Keyword: fin diameter

Search Result 202, Processing Time 0.028 seconds

Morphological Development of Eggs and Larvae of the Pacific Cod, Gadus macrocephalus (대구(Gadus macrocephalus)의 난 발생 및 자어 형태발달)

  • Kim, Tae-Jin;Park, Chung-Youl;Lee, So-Gwang;Gwak, Woo-Seok
    • Korean Journal of Ichthyology
    • /
    • v.19 no.4
    • /
    • pp.343-349
    • /
    • 2007
  • Embryonic and larval developments on Pacific cod, Gadus macrocephalus are described from laboratory-reared specimens. The eggs (1.075~1.168 mm in diameter) were weakly adhesive, almost spherical in shape, transparent and unpigmented, showing a pale yellow yolk without oil globules. Hatching was occurred 220 hrs after fertilization at $9.8^{\circ}C$. The newly hatched larvae (3.72~4.40 mm in total length, TL) had 43~47 (11~13+32~34) myomeres, mouth and anus which was not yet opened. The yolk was completely absorbed at 4.58 mm TL, and transformed to postlarval stage. Locations of the anus and second dorsal fin origin, and distinctive growth of the larvae head were observed at 5.48 mm TL with melanophores in the gill cover and upper region of the occipital. In addition, melanophores were distinctive in the ventral region and caudal fin base at 6.88 mm TL. All fins were formed with a complete set of fin rays having the following counts (D. 3~7-12~14-13~14; A. 13-15) at 11.54 mm TL. Both lateral line and barbel of lower jaw were observed at 15.07 mm TL.

The Ultrastructure of Spermatozoa of the Ussurian Bullhead, Leiocassis ussuriensis (Teleostei, Siluriformes, Bagridae) with Phylogenetic Considerations (대농갱이 Leiocassis ussuriensis 정자의 미세구조와 계통적 고찰 (경골어류, 메기목, 동자개과))

  • Kim, Kgu-Hwan;Lee, Young-Hwan
    • Korean Journal of Ecology and Environment
    • /
    • v.33 no.4 s.92
    • /
    • pp.405-412
    • /
    • 2000
  • The fine structure of spermatozoa of Leiocassis ussuriensis was examined with scanning and transmission electron microscopies. The spermatozoon of L. ussuriensis is approximately $68.8\;{\mu}m$ in length and a relatively simple cell with a spherical nucleus, a short midpiece and a tail. The ultrastructure of spermatozoa of L. ussuriensis is characterized by the following features. The nuclear fossa, the length of which is about two-thirds of the nuclear diameter, contains two centrioles. The centrioles are orientated approximately $180^{\circ}$ to each other. The mitochondria are arranged in two layers and their number is 12 or more. The axoneme is the 9+2microtubular pattern and has inner but no outer dynein arms as in other bagrids. The two axonemal fins are in the same plane with the two central microtubules, the doublets 3 and 8. The axonemal fins and the inner dynein arm are shared in Bagridae and the deep nuclear fossa is shared in Siluriformes. The axonemal finsobse observed in Bagridae and Amblycipitidae of Siluriformes might be the apomorphic character in Ostariophysi. They are not reported in Cyprinidae and Characiformes.

  • PDF

Eggs Development ana Larvae of the Horn Fish, Hemiramphus sajori TEMMINCK et SCHLEGEL (학공치의 난발생과 부화자어)

  • KIM Yong-Uk;MYOUNG Jung-Goo;CHOI Sang-Oong
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.17 no.2
    • /
    • pp.125-131
    • /
    • 1984
  • The horn fish, Hemiramphus sajori TEMMINCK et SCHLEGEL, is widely distributed in the coastal waters of Korea, Japan and Taiwan. On April 13, 1983, mature adults of the horn fish were collected from Changson channel, Namhae. The authors carried out artificial insemination on the field, and incubated the eggs and reared larvae in the laboratory. And these larvae were reared for about two weeks in glass jars, fed brine shrimp nauplii. The eggs of this species are demersal and adhesive, with 4 to 6 filaments at the animal pole and a filament at the vegetal pole. The diameter of these eggs varies 1.80 to 2.00 mm. The hatching took place in ca. 376 hours after fertilization. During the incubation period water temperature fluctuated between $13.5^{\circ}C\;and\;20.0^{\circ}C$. The newly hatched larvae were elongate in shape $7.40{\sim}8.00$ mm in total length with $40+16{\sim}17=56{\sim}57$ myomers. Many melanophore were distributed on the head, both sides of dorsal body contour, peritoneum and ventral line of the tail part. Four days after hatching, the larvae were from 9.00 to 9.65 mm in total length, at this tims the larvae absorbed the yolk completely, and became postlarvae. Fourteen days after hatching, the larvae attained 13.25 mm in total length, with 14 rays of the dorsal fin, 13 rays of the anal fin, and 4 rays of pectoral fin. The lower jaw has somewhat projected.

  • PDF

Spawning Behavior and Early Life History of Takifugu pardalis (Teleostei: Tetraodontidae) in Korea (졸복, Takifugu pardalis (Temminck et Schlegel)의 산란습성 및 초기생활사)

  • Han, Kyeong-Ho;Cho, Jae-Kwon;Lee, Sung-Hun;Hwang, Dong-Sik;Yoo, Dong-Jae
    • Korean Journal of Ichthyology
    • /
    • v.13 no.3
    • /
    • pp.181-189
    • /
    • 2001
  • Spawning behavior of the Takifugu pardarlis (Temminck et Schlegel) was observed on the Jook-do coast in Tongyong from March 1997 to June 1999. The spawning ground was locted in the intertidal zone between Tongyong and Koje-do. Its bottom was mainly gravels and stones, and its depth was 0.5~1.0 m. Spawning season was from the end of the March to the middle of May. During the spawning season, the mature fishes formed school a of 10~30 individuals, then moved to the spawning ground together. When a mature female spawned eggs, the attendant males fertilized them at the same time. The fertilized eggs obtained from the parent fishes caught at the spawning ground were adhesive, opaque and spherical, measuring 1.14~1.24 mm (mean 1.19 mm, n = 50) in diameter with numerous tiny oil globules. Hatching period was about 205 hours after fertilization at water temperature of $18.0{\pm}0.5^{\circ}C$. The newly hatched larvae were 2.92~3.10 mm (mean 3.01 mm, n = 20) in total length (TL), had a large yolk, and 11~13+14~15 = 25~28 myomeres. At 5 days, the larvae had attained 3.79~3.85 mm (mean 3.82 mm, n = 20) in TL and had transformed into the postlarval stage. At 15 days, the postlarvae had attained 7.78~7.90 mm (mean 7.84 mm, n = 20) in TL. At 21 days, had larvae attained 10.15~10.27 mm (mean 10.21 mm, n = 20) in TL and had reached the juvenile stage. All fins were formed with a complete set of fin rays having the following counts: dorsal fin rays 11~12; anal fin rays 9; pectoral fin rays 14~15; caudal fin rays 11~12.

  • PDF

Shape Optimization of a Rotating Cooling Channel with Pin-Fins (핀휜이 부착된 회전하는 냉각유로의 최적설계)

  • Moon, Mi-Ae;Husain, Afzal;Kim, Kwang-Yong
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.34 no.7
    • /
    • pp.703-714
    • /
    • 2010
  • This paper describes the design optimization of a rotating rectangular channel with staggered arrays of pin-fins by Kriging metamodeling technique. Two non-dimensional variables, the ratio of the height to the diameter of the pin-fins and the ratio of the spacing between the pin-fins to the diameter of the pin-fins are chosen as the design variables. The objective function that is a linear combination of heat transfer and friction loss related terms with a weighting factor is selected for the optimization. To construct the Kriging model, objective function values at 20 training points generated by Latin hypercube sampling are evaluated by a three-dimensional Reynolds-averaged Navier-Stokes (RANS) analysis method with the SST turbulence model. The Kriging model predicts the objective function value that agrees well with the value calculated by the RANS analysis at the optimum point. The objective function is reduced by 11% by the optimization of the channel.

Performance Simulation and Analysis of the Solar Thermal Storage System Using Heat Pipe (히트파이프를 사용한 태양열 축열시스템의 성능모사 및 해석)

  • Jung, Eui-Guk;Boo, Joon-Hong;Kim, Jong-Kyu;Kang, Yong-Heack
    • 한국태양에너지학회:학술대회논문집
    • /
    • 2009.11a
    • /
    • pp.80-85
    • /
    • 2009
  • Mathematical modeling and performance simulation results were shown for the solar thermal storage system which used heat pipe. The thermal storage system was composed of thermal storage tank and charging/discharging heat exchanger with one by the heat pipes. Heat pipe heat exchanger was attached to system, and could carry out charging and discharging to thermal storage tank at the same time. Height of the thermal storage tank was 600 mm, and that of the charging/discharging heat exchanger was 400 mm. Length of the heat pipe was the same as the total height of thermal storage system, and outer and inner diameter were 25.4 mm(O.D.) and 21.4 mm(I.D.) respectively. Diameter of the circular was 43 mm(O.D.), and fin geometries were considered as the design parameters. High temperature phase change material(PCM), $KNO_3$ and low temperature PCM, $LINO_3$ were charged to storage tank to adjust working temperature. Total size of thermal storage system able to get heat capacity more than 500 kW was calculated and the results were shown in this study. Number of heat pipe was required more than maximum 500, and total length of thermal storage system was calculated to the more than maximum 3 m at various condition.

  • PDF

Numerical Study on the Fluid Flow and Heat Transfer Past a Cylinder with a Periodic Array of Circular Fins (원형 핀이 부착된 실린더 주위의 유동 및 열전달에 관한 수치적 연구)

  • Yoon, Hyun-Sik;Chun, Ho-Hwan;Lee, Dong-Hyuk
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.43 no.3 s.147
    • /
    • pp.285-293
    • /
    • 2006
  • Three-dimensional and time-dependent solution for the fluid flow and heat transfer past a circular cylinder with fins is obtained using accurate and efficient spectral methods. A Fourier expansion with a corresponding uniform grid is used along the circumferential direction. A spectral multi-domain method with a corresponding Chebyshev collocation is used along r-z plane to handle fins attached to the surface of a circular cylinder. At the Reynolds number of 300 based on a cylinder diameter, results with fins are compared with those without fins in order to see the effects of the presence of fins on three-dimensional and unsteady fluid flow and heat transfer past a bluff body. The detail structures of fluid flow and temperature field are obtained as a function of time to investigate how the presence of fins changes heat transfer mechanism related to the vortical structure in the wake region.

Thelohanellus misgurni (Kudo, 1919) infection on the fins of Chinese muddy loach Misgurnus mizolepis (미꾸라지, Misgurnus nazolepis의 지느러미에 기생한 포자충, Thelohanellus misgurni (Kudo, 1919)에 관하여)

  • Kwon, Se-Ryun;Kim, Hyoung-Jun
    • Journal of fish pathology
    • /
    • v.24 no.2
    • /
    • pp.167-171
    • /
    • 2011
  • On September in 2010, myxosporidian parasites were found on the fins of Chinese muddy loach, Misgurnus mizolepis, Several cysts of approximately 2 mm diameter were observed on the fins. Numerous spores were found in the cyst. The total length of the spore was 13.0 to 15.8 ${\mu}m$, and the width of spore was 6.0 to 7.5 ${\mu}m$. As the results, the myxosporidians were finally identified as Thelohanellus misgurni (Kudo, 1919) on the basis of the presence of characteristic cysts and size of spores.

A New Record of the Family Hoplichthyidae(Pisces : Perciformes ) from Korea (한국산(韓國産) 가시양태과(科) 어류(魚類) 1 미기록종(未記錄種) Hoplichthys gilberti)

  • Lee, Chung-Lyul;Joo, Dong-Soo
    • Korean Journal of Ichthyology
    • /
    • v.7 no.2
    • /
    • pp.109-113
    • /
    • 1995
  • A ghost flatheads, Hoplichthys gilberti Jordan et Richardson of the family Hoplichthyidae was studied for the first time in Korea. Five specimens were collected from Pusan in March 28, 1995. The Hoplichthys gilberti is similar to H. langsdorfii in morphological characters, but differs in having 1 rows of spinous processes on scute of both side of body, nearly same size between snout length and eye diameter and 13+3 pectoral fin rays. A new Korean name "Oegasiyangtae" is proposed for the H. gilberti.

  • PDF

Ultrastructure of the Sperm in Testes of the Pond Smelt (Hypomesus nipponensis) (빙어(Hypomesus nipponensis)의 정소 내 정자의 미세구조)

  • Kim, Jae-Goo;Park, No-Kwan;Reu, Dong-Suck
    • Applied Microscopy
    • /
    • v.40 no.4
    • /
    • pp.253-259
    • /
    • 2010
  • The ultrastructure of sperms in testes of the pond smelt (Hypomesus nipponensis) was investigated using electron microscopes. The whitish testis was located between swim bladder and intestine. Especially, the left testis was larger than the right testis. The sperm was approximately $26\;{\mu}m$ in length. The sperm had an oval head and the acrosome was not found. The nucleus was about 400 nm in diameter and chromatin was incompletely condensed. The nuclear fossa deeply formed in sperm head and two centrioles were located in the fossa. The mitochondrium was observed only one in midpiece of the sperm and a motile flagellum consisted of an axoneme with a typical 9+2 pattern of microtubule. Also, the tail of the sperm has axonemal fins.