• 제목/요약/키워드: filtration coefficient

검색결과 93건 처리시간 0.033초

Polymer Base Bored Pile in Bangkok Subsoils

  • Teparaksa, Wanchai
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2008년도 추계 학술발표회
    • /
    • pp.407-426
    • /
    • 2008
  • The bentonite slurry has been used as the stabilize suspension for wet process bored pile construction in Thailand. The bentonite suspension has benefit on filtration in the sand layer, but it creates thick cake film along pile shaft and loose sedimentation at pile toe. The base grouting technique was widely used to rectify the soft base or loose sedimentation problem of bored pile. The base grouting technique was not increased only end bearing capacity, but was also more increase in skin friction capacity of the bored piles. The comprehensive researches on base grouting was carried out by installing PVC casing inside the shaft to allow the drilling through the pile base in order to collect the soil sample below the pile tip. The polymer based slurry recently was used to replace the bentonite slurry to overcome the thick cake film along pile shaft as well as loose sedimentation at pile toe. The extent research on polymer slurry by physical model was performed to verify the real behavior of polymer. The appropriate mixing ratio of polymer was proposed. The design skin friction coefficient, $\beta$ and end bearing coefficient, Nq, for sand layer base on fully instrumented tested pile were proposed. The application on remedial of the lose capacity bored pile with large displacement in Bangladesh was proposed and discussed.

  • PDF

낮은 TCR 특성을 가지는 플레이트 션트저항의 전기적 특성 (Electrical Properties of Plate Typed Shunt Resistors with Low TCR Property)

  • 임영택;김은민;이상원;안정래;이선우
    • 한국전기전자재료학회논문지
    • /
    • 제32권3호
    • /
    • pp.219-222
    • /
    • 2019
  • In this study, we fabricated plate-type shunt resistors with thermal stability by parallelly connecting metal alloy plates with positive temperature coefficient of resistance (TCR) and carbon nanotube (CNT) plates with negative TCR. The metal alloy plates, which were prepared by alloying Cu and Mn with a composition of 91 wt% of Cu and 9 wt% of Mn, showed around $800ppm/^{\circ}C$ of TCR, and the CNT plates prepared from the CNT solution by using the vacuum filtration method showed around $-800ppm/^{\circ}C$ of TCR. The shunt resistor that was fabricated by stacking metal alloy plates and CNT plates in this work showed about $46.93ppm/^{\circ}C$ of TCR. Therefore, we conclude that a shunt resistor with low TCR can be realized by simply adjusting the TCR of the metal alloy only, because the TCR of the CNT plate has an identical value.

탄소나노튜브 소재의 정밀 수동소자 적용을 위한 한계 정격전력 용량에 관한 연구 (A Study on the Limited Rate Power Capacity for Applications for Precision Passive Devices Based on Carbon Nanotube Materials)

  • 이선우
    • 한국전기전자재료학회논문지
    • /
    • 제35권3호
    • /
    • pp.269-274
    • /
    • 2022
  • We prepared carbon nanotube (CNT) paper by a vacuum filtration method for the use of a chip-typed resistor as a precision passive device with a constant resistance. Hybrid resistor composed of the CNT resistor with a negative temperature coefficient of resistance (T.C.R) and a metal alloy resistor with a positive T.C.R could lead to a constant resistance, because the resistance increase owing to the temperature increase at the metal alloy and decrease at the CNT could counterbalance each other. The constant resistance for the precision passive devices should be maintained even when a heat was generated by a current flow resulting in resistance change. Performance reliabilities of the CNT resistor for the precision passive device applications such as electrical load limit, environmental load limit, and life limit specified in IEC 60115-1 must be ensured. In this study, therefore, the rated power determination and T.C.R tests of the CNT paper were conducted. -900~-700 ppm/℃ of TCR, 0.1~0.2 A of the carrying current capacity, and 0.0625~0.125 W of the rated power limit were obtained from the CNT paper. Consequently, we confirmed that the application of CNT materials for the precision hybrid passive devices with a metal alloy could result in a better performance reliability with a zero tolerance.

고에너지 엑스선을 조사한 신장의 세포막모델에서 포도당수용액 (H2O-C6H12O6)의 여과작용특성 (Filtration Characteristics of H2O-C6H12O6 Solution at Cell Membrane Model of Kidney which Irradiated by High Energy X-Ray)

  • 고인호;여진동
    • 한국방사선학회논문지
    • /
    • 제14권2호
    • /
    • pp.85-95
    • /
    • 2020
  • 본 논문에서는 고에너지 엑스선(6MV X선)을 조사한 세뇨관의 세포막 모델에서 오줌의 원료구성성분인 포도당 수용액(H2O-C6H12O6)의 압력차에 따른 여과작용특성에 대하여 연구하였다. 이 실험에 사용한 세포막 모델은 polysulfone 지지막에다가 m-phenylene-diamine(MPD)과 trimesoyl chloride(TMC)- hexane을 계면중합으로 만들어진 여과성 고분자 복합막을 사용하였다. 0.5 wt% TMC- hexane 용액으로 만들어진 여과성막(CM-2)은 0.5 wt% TMC- hexane 용액으로 만들어진 여과성막(CM-1)보다도 총 부피투과플럭스(Jv)와 배제계수(R)가 매우 높다. 압력차(1.5~4MPa)와 36.5℃에서 방사선을 조사한 세뇨관의 고분자 막(세포막모델)은 포도당수용액(H2O-C6H12O6)에서 총 부피투과플럭스(Jv)와 배제계수(R)가 비 조사된 세포막모델보다 각각 약 2 ~ 13배, 4 ~ 6배 정도 감소되었다. 세포막모델에서 포도당수용액(H2O-C6H12O6)의 농도가 증가하면 배제계수(R)가 증가하고 총 부피투과플럭스(Jv)는 감소하였다. 결국 방사선조사로 인해서 세뇨관의 세포막에서 포도당수용액(H2O-C6H12O6)의 여과기능이 비정상적으로 되어 세포장해가 발생하게 되었다고 사료됐다.

초음파로 처리된 소화슬러지의 비저항계수 (SRF)와 모세관흡입시간(CST)을 이용한 탈수특성 비교 (Comparison of the Dewatering Characteristic Using Specific Resistance and Capillary Suction Time of Digested Sewage Sludge by Ultrasonic Treatment)

  • 나승민;박지호;김영욱;김지형
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2007년도 춘계학술발표논문집
    • /
    • pp.287-290
    • /
    • 2007
  • We investigated the effect of ultrasound on the dewaterability of sewage sludge. Because, dewatering and disposal of waste sludge is a major economical factor in the operation of wastewater treatment plants. Capillary Suction Time(CST) and Specific Resistance to Filtration (SRF) were used to evaluate the sludge dewatering behaviors. From the results of the experiment, it was found that ultrasonic treatment can improve the dewaterability. We discovered that CST and SRF were highly related, according to the correlation coefficient($R^{2}$).

  • PDF

계 골격근에서 15S ATPase의 순수분리 및 특성연구 (Purification and Characterization of a 15S Arpase from Chick Skeletal Muscle)

  • 심규석;채광수
    • 한국동물학회지
    • /
    • 제37권4호
    • /
    • pp.524-530
    • /
    • 1994
  • An Arpase complex has been purified to apparent homogeniety from the extract of chick skeletal muscle using conventional column chromatographies and glycerol density gradient centrifugation. This eWe has a sedimentation coefficient of 15S as determined by the gradient centrifugation and therefore is referred to as the 15S ATPase. It behaves as a 600-kOa molecule upon gel filtration analysis using a Superose-6 column. However, the ATPase runs as a 95-kDa polvpeptide when analyzed by polvacrvlamide gel electrophoresis in the presence of sodium dodecyl sulfate. Thus, the Arpase is likely to consist of six identical subunits of 95 KDa. It has a Km value of 0.6 mM for ATP and is maximally active at pH 9.

  • PDF

통상적 $^{99m}TC-DTPA$ 신장스캔을 이용한 GFR 측정 (Glomerular Filtration Rate Determined in Conjunction with $^{99m}TC-DTPA$ Routine Renal Scintigraphy)

  • 이강욱;한진석;정준기;이명철;이정상;고창순
    • 대한핵의학회지
    • /
    • 제23권1호
    • /
    • pp.49-54
    • /
    • 1989
  • Many previously described nuclear medicine procedures to assess glomerular filtration rate (GFR) required numerous blood samples obtained over a period of several hours to determine plasma concentrations of the injected radiopharmaceuticals. And other indirect methods of determining renal clearance have some problems due to individual variations in volume of distribution of the radionuclides used. Rescently reported Jackson's method have the great advantages that is a direct measurement method requiring less than 40 min of imaging time and single blood sampling. And it correctly accounts for individual variations in volume of distribution of the radiopharmaceuticals and can be done with routine renal scintrgraphy. We measured $^{99m}Tc-DTPA$ renal clearance with Jackson's method during the routine $^{99m}Tc-DTPA$ renal scintigraphy in 63 patients admitted to department of internal medicine in SNUH. In 23 cases among 63 patients creatinine clearence was accounted simultaneously. The range of $Cl_{DPDA}$ was from 19.9 ml/min to 170 ml/min and the correlation of $Cl_{DPDA}$ and creatinine clearance was discribed by Y=16.2570+0.7852 X($X=Cl_{DTPA}$ Y=creatinine clearance). And the correlation coefficient r was 0.88. We concluded that $^{99m}Tc-DTPA$ renal clearance measurement with Jackson's method was clinically useful to account GFR that can be done with routine $^{99m}Tc-DTPA$ renal scintigraphy simultaneously.

  • PDF

초미세입자 제거를 위한 고온용 나노 세라믹 필터 개발 (Development of Nano Ceramic Filter for the Removal of Ultra Fine Particles)

  • 김종원;안영철;이병권;정현재
    • 설비공학논문집
    • /
    • 제22권1호
    • /
    • pp.13-20
    • /
    • 2010
  • Airborne particulate matters have two modes of size distributions of coarse mode and fine mode. The coarse mode which is formed by break down mechanism of large particles has a peak around the $100\;{\mu}m$, and the fine mode formed by condensation and build up mechanism of evaporated vapors has a peak at several ${\mu}m$. The coarse mode particles can be removed easily by conventional collecting equipments such as a cyclone, an electrostatic precipitator, and a filter, however the fine mode particles can not be collected easily. Usually the fine mode particles are generated in the high temperature conditions especially through boilers and incinerators, so the high efficient and temperature filter is essential for the filtration. In this study, a nano ceramic filter for the removal of fine particles in the high temperature is developed and tested for several characteristics. The nano ceramic filter has double layer of micro and nano structure and the pressure drop and the filtration efficiency for $0.31\;{\mu}m$ at 3 cm/s are 15.45 mmAq, and 96.75%, respectively. The thermal conductivity is $0.038\;W/m{\cdot}K$, and the coefficient of water vapor permeability is $3.63\;g/m^2{\cdot}h{\cdot}mmHg$. It is considered that the sensible heat exchange rate is very poor because the low thermal conductivity but it has high potential to exchange latent heat.

대구수돗물의 THMs 생성특성 (A Study on Characterization of THMs Formation in Tap Water in Daegu)

  • 배기수;백윤경;류기성;신상희;이찬형
    • 대한환경공학회지
    • /
    • 제33권12호
    • /
    • pp.893-899
    • /
    • 2011
  • 정수처리공정별 THMs 현황과 영향인자와의 상관성 등 생성특성을 분석하고 저감할 수 있는 운영방안을 연구하였다. M정수장의 처리공정은 전염소-응집-침전-여과-오존-활성탄-후염소로 구성되어 있다. 공정별 THMs 농도는 응집침전여과의 기본공정에서 92~93%가 생성되어 전염소처리공정이 주된 영향을 미치는 것으로 조사되었다. THMs 생성과 원수수온, $KMnO_4$소비량의 결정계수는 0.80, 0.72로 높게 나타났으며 정수장에서는 원수수온과 $KMnO_4$소비량으로 생성농도를 예측하는 것이 효율적이라 판단된다. 중염소처리를 한 경우 정수 THMs이 전염소처리의 48% 수준으로 나타나, 염소 주입지점만 변경하는 중염소 처리가 THMs 저감에 유용한 방식으로 판단된다. 전구물질 제거를 위한 분말 활성탄 실험에서는 전염소 앞단에 주입하는 경우에 THMs 생성이 줄었다. 생성된 THMs 제거에는 에어스트리핑 방법이 효과가 있었다.

하천수질정화용 토양여과의 여과용량 증대와 수질 개선을 위한 친환경 여재 특성 비교 (Characteristics of soil and eco-friendly media for improving the filterability and water quality in soil filtration)

  • 기동원;조강우;원세연;송경근;안규홍
    • 상하수도학회지
    • /
    • 제24권4호
    • /
    • pp.453-462
    • /
    • 2010
  • Nowadays, the challenges of ensuring good water quality and quantity of river are becoming more important for human society, but there has been troublesome for purifying river water. In this study, we performed the fundamental study of a river water treatment system using riverside soil and eco-friendly optimal media for improving river water quality and can also treat a large amount of river water. As the results of the physical and chemical characterization of the two different soils (Kyungan and Chungrang, The Republic of Korea), which were collected from real stream sides in the Han River basin, and five kinds of media (zeolite, perlite, steel slag, woodchip and mulch), both soils were all classified as a sand, and effective size ($D_{10}$) and uniformity coefficient (U) of the soil were about 0.2 mm and 4 or so, respectively. Through the batch and column experiments with the soil and eco-friendly media, zeolite and mulch were found to be efficient for decreasing nitrogen. In addition, steel slag was especially superior to the other media for phosphorus removal. From soil reforming tests volume ratios were 2.8, 1, and 1 of Kyungan soil, zeolite, and steel slag hydraulic conductivity of mixed soil was increased $1.30{\times}10^{-2}$ from $2.85{\times}10^{-3}$ of Kyungan soil, and the removal efficiencies of nitrogen and phosphorus were also improved. These results show that reforming of the soil enhanced the purification of a large amount of water, and zeolite, mulch, and steel slag might be facilitated as proper functional media.