• 제목/요약/키워드: filters

검색결과 4,199건 처리시간 0.029초

Carbon dioxide (CO2) concentrations and activated carbon fiber filters in passenger vehicles in urban areas of Jeonju, Korea

  • Kim, Hong Gun;Yu, Yunhua;Yang, Xiaoping;Ryu, Seung Kon
    • Carbon letters
    • /
    • 제26권
    • /
    • pp.74-80
    • /
    • 2018
  • The South Korean Ministry of the Environment has revised the laws relating to the management of interior air quality for multiple use facilities, and recommends maintaining carbon dioxide ($CO_2$) concentration in passenger vehicles below 1000 ppm during operation in urban areas of large cities. However, the interior $CO_2$ concentration of passenger vehicles can rapidly increase and exceed 5000 ppm within 30 min, as observed when two passengers are traveling in urban areas of the South Korean city of Jeonju with the air conditioner blower turned off and the actuator mode set to internal circulation mode. With four passengers, $CO_2$ concentration can reach up to 6000 ppm within 10 min. To counter this, when the actuator is set to external mode, $CO_2$ concentration can be maintained below 1000 ppm, even after a long period of running time. As part of the air conditioning system, alkali-treated activated carbon fiber filters are considered to be far superior to the commercial non-woven filters or combination filters currently commonly in use.

바나디아 촉매담지 세라믹 캔들필터를 이용한 질소산화물 제거기술 (Removal Technology of NOx Using V2O5/TiO2 Catalyst Impregnated Ceramic Candle Filters)

  • 이동섭;박진식
    • 한국환경과학회지
    • /
    • 제16권9호
    • /
    • pp.1077-1083
    • /
    • 2007
  • [ $V_2O_5/TiO_2$ ] catalyst impregnated ceramic candle filters are in principle, capable of performing shallow-bed dust filtration plus a catalytic reaction, promoted by a catalytic deposited in their inner structure. Pilot-scale $V_2O_5/TiO_2$ catalyst impregnated ceramic candle filters were prepared, characterized and tested for their activity towards the SCR reaction. The effect on NO conversion of operating temperature, gas hourly space velocity, amount of deposited catalyst, pressure drops and long-term experiment (life of catalytic filter) was determined. The following effects of $V_2O_5/TiO_2$ catalyst impregnated ceramic candle filters in SCR reaction are observed: (1) It increases the activity and widens the temperature window for SCR. (2) When the content of $V_2O_5$ catalyst increases further from 3 to 9wt.%, activity of NO increases. (3) NO conversion at first increases with temperature and then decreases at high temperatures (above $400^{\circ} over), possibly due to the occurrence of the ammonia oxidation reaction.

Ka 대역 위성 중계기용 출력 멀티플렉서에 관한 연구 (A Study on Output Multiplexer for Ka-Band Satellite Transponder)

  • 이주섭;엄만석;박상준;이필용;염인복;박종흥
    • 한국전자파학회논문지
    • /
    • 제15권7호
    • /
    • pp.706-712
    • /
    • 2004
  • 본 논문에서는 Ka대역 위성 중계기용 출력 멀티플렉서의 설계 및 제작에 대하여 언급하였다. 출력 멀티플렉서는 저역통과필터, 채널필터, 매니폴드(Manifold)로 구성되어 있으며, 위성 중계기의 무게와 부피를 최소화하기 위하여 채널필터는 이중모드로 설계하였다. 채널별 주파수 선택도를 높이기 위하여 채널필터는 4차 타원 응답형으로 설계하였으며, 저역통과 필터는 13차 corrugated 형으로 설계하였다. 채널필터와 매니폴드의 초기 설계 후 최적화 과정에 있어서 모든 설계 변수를 최적화시키는 대신 일부의 설계 변수만을 최적화시킴으로써 용이하게 최적화 설계할 수 있음을 확인하였다. 제작한 Ka 대역 위성 중계기용 출력 멀티플렉서의 측정결과는 설계결과와 동일한 특성을 나타내었다.

탭 선로를 이용한 새로운 결합선로 여파기 설계법 (A New Design Method of Tapped Coupled-Line Filters)

  • 우동식;김강욱
    • 한국전자파학회논문지
    • /
    • 제15권11호
    • /
    • pp.1100-1107
    • /
    • 2004
  • 본 논문에서는 다단 결합선로 여파기(edge coupled-line filter)의 입출력단을 탭 선로(tapped-line)의 형태로 구현하기 위하여 등가회로 기반의 새로운 설계법을 개발하여 적용하였다. 다단 결합선로 여파기는 입출력단의 선로 간격이 매우 좁아서(수 mil) 제작하기가 힘든 결함이 있는데, 이를 탭 선로로 대체함으로써 제작 시 오차에 덜 민감하고 밀링머신으로 쉽게 제작할 수 있도록 하였다. 또한, 본 논문에서 제안된 간단한 설계법을 사용하면 20 GHz 이하의 주파수 대역에서 20 % 이하의 대역폭 특성을 갖는 탭 선로의 파라미터를 얻을 수 있으며, 이를 바탕으로 정확한 탭 선로 여파기를 설계할 수 있다.

능동소음제어를 위한 적용 IIR 필터 (Adoptive IIR Fillers for Active Noise Control)

  • 남현도
    • 조명전기설비학회논문지
    • /
    • 제16권5호
    • /
    • pp.112-118
    • /
    • 2002
  • 능동 소음제어시스템의 적응필터 알고리즘으로 FIR구조가 많이 사용되고 있으나, FIR 필터는 IIR 필터에 비해 비슷한 성능을 얻기 위해 필터의 차수가 커져야 하므로 계산량이 많아지는 단점이 있다. IIR 필터의 경우는 항상 극점이 존재하므로 안정성에 문제가 많으며 능동 소음 제어 시스템의 작동 초기에 IIR 필터의 극점이 z평면에서 단위 원 밖으로 나가는 경우 시스템 자체가 불안정해질 수 있다. 본 논문에서는 초기에 IIR 필터의 극점을 원점방향으로 끌어당겨 안정도를 개선하고 정상상태에는 원위치로 보내 필터성능에는 영향을 미치지 않는 안정도가 강화된 적응 IIR 필터 알고리즘을 제안한다. 컴퓨터 시뮬레이션을 통해 제안된 안정도가 개선된 IIR 필터의 성능이 우수함을 확인하였으며, 소음실에서 TMS320C6701 DSP 칩을 사용하여 소음제어 실험을 한 결과 안정되게 l0㏈ 이상의 소음 감쇄 효과를 얻었다.

고집적, 저전력 특성을 갖는 저잡음 IIR 필터 설계 (Design of low-noise II R filter with high-density and low-power properties)

  • 배성환;김대익
    • 정보처리학회논문지A
    • /
    • 제12A권1호
    • /
    • pp.7-12
    • /
    • 2005
  • Scattered look-ahead (SLA) 파이프라인 방법은 디지털 IIR 필터의 고속 또는 저전력 응용분야에 효율적으로 사용된 수 있다. 그러나 이 방법을 통하여 파이프라인된 필터의 안정성이 보장될 수 있지만 필터의 극점들이 임계지역에 밀집될 때에는 큰 라운드오프 잡음에 영향을 받게 된다. 파이프라인된 필터에서 밀집된 극점들을 피하기 위해 수정된 Remez exchange 알고리즘과 최소 자승법을 이용하여 극점의 각도와 반지름을 제한한 IIR 필터 설계 방식을 제안하였으며, 그 결과 향상된 주파수 응답과 감소된 계수 민감도를 얻을 수 있었다. 또한 모의실험 결과를 통하여 제안된 방법이 일반적인 방법에 비해 $33{\%}$의 면적감소와 $45{\%}$의 전력을 감소시킴을 확인하였다.

교차결합 헤어핀 공진기를 이용한 마이크로스트립 대역통과 여파기 설계 (Design of Microstrip Band-Pass filters Using Cross-Coupled Hairpin Resonators)

  • 오창근;전성근;이문수
    • 한국정보통신학회논문지
    • /
    • 제4권3호
    • /
    • pp.557-564
    • /
    • 2000
  • 교차결합 마이크로스트립 헤어핀 공진기 여파기는 통과대역과 저지대역에서 리플이 나타나며 이러한 리플들은 주파수 선택도와 삽입손실을 개선시킬 수 있다. 교차결합 여파기는 구조가 간단할 뿐 만 아니라 여러가지 형태로 구성할 수 있으므로 그에 따라 여파기 크기가 달라진다. 본 연구에서는 중심주파수가 1.8GHz이고 대역폭이 5.0%를 갖는 대역통과 여파기를 Ensemble 소프트웨어로 설계하였다. 제작된 여파기의 대역폭은 중심 주파수 1.8GHz에서 약 4.53%를 나타내었다.

  • PDF

다양한 시간지연을 갖는 유전체 공진기 대역통과 필터의 구현 (Design and Implementation of Dielectric Resonator Bandpass Filters with Various Time-Delay)

  • 최우성;박노준
    • 한국정보통신학회논문지
    • /
    • 제14권11호
    • /
    • pp.2397-2402
    • /
    • 2010
  • 본 논문에서는 800MHz 대역에서 다양한 시간자연 특성을 갖는 유전체 공진기 대역통과 필터를 설계 및 제작하였다. 각각의 경우에 삽입손실은 모두 2dB 이내이었고 ripple은 0.2dB 이내이었으며 반사손실은 20dB 이상의 값을 가지는 우수한 특성을 보였다. 지연시간의 경우에는 각각 6ns, 12ns, 20ns를 구현하였으며 이때 평탄도의 범위는 1ns 이내이었다. 또한 유전체 블록이 2-hole을 갖는 경우에는 2~4ns의 범위를 갖는 것을 확인하였으며 각각의 유전체 필터를 조합하여 다양한 지연시간을 갖는 유전체 공진기 필터를 구현하였다.

Frequency Characteristics of the Synchronous-Frame Based D-Q Methods for Active Power Filters

  • Wang, Xiaoyu;Liu, Jinjun;Hu, Jinku;Meng, Yuji;Yuan, Chang
    • Journal of Power Electronics
    • /
    • 제8권1호
    • /
    • pp.91-100
    • /
    • 2008
  • The d-q harmonic detecting algorithms are dominant methods to generate current references for active power filters (APF). They are often implemented in the synchronous frame and time domain. This paper researches the frequency characteristics of d-q synchronous transformations, which are closely related to the analysis and design issues of control system. Intuitively, the synchronous transformation is explained with amplitude modulation (AM) in this paper. Then, the synchronous filter is proven to be a time-invariant and linear system, and its transfer function matrix is derived in the stationary frames. These frequency-domain models imply that the synchronous transformation has an equivalent effect of frequency transformation. It is because of this feature, the d-q method achieves band-pass characteristics with the low pass filters in the synchronous frame at run time. To simplify these analytical models, an instantaneous positive-negative sequence frame is proposed as expansion of traditional symmetrical components theory. Furthermore, the synchronous filter is compared with the traditional bind-pass filters based on these frequency-domain analytical models. The d-q harmonic detection methods are also improved to eliminate the inherent coupling effect of synchronous transformation. Typical examples are given to verify previous analysis and comparison. Simulation and experimental results are also provided for verification.

고온 초전도체를 이용한 이동통신 기지국용 영역통과 필터에 관한 연구 (High-temperature superconducting band-pass filters for digital cellular communication system)

  • 이종현;도영호;곽준식;김채옥;홍진표;이경림;한석길;차국린
    • Progress in Superconductivity
    • /
    • 제4권2호
    • /
    • pp.132-136
    • /
    • 2003
  • Extremely selective high temperature superconducting (HTS) band -pass filters were developed for the base transceiver station applications of Digital Cellular communication Service (DCS). The filters have a bandwidth of 25 MHz at a center frequency of 834 MHz. There are 12 resonators which have spiral-meander microstrip-line structures in order to reduce far-field radiations with a reasonable tunability. As a result, the size of filters is 5 mm $\times$ 17 mm $\times$ 41 mm. Device characteristics exhibited a low insertion loss of -0.4 dB with a -0.2 dB ripple and a return loss better than -10 dB in the pass-band at 65 K. The out-of-band signals were attenuated better than 60 dB about 3.5 MHz from the lower band edge, and 3.8 MHz from the higher band edge.

  • PDF