• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.11
• /
• pp.627-634
• /
• 2000

In this paper, new micromachined tunble bandpass filters for multi-band millimeter-wave telecommunication systems are proposed. Two types of mm-wave tunable filters are fabricated using micromachning technology and the responses of the filters are measured. One is two-pole lumped elements filter and the other two-pole resonators filter. Frequency tunability of the filter is achieved by changing the gap between a common CPW ground plate and the movable cantilever beam connected to the transmission line with the controllable renge of 2.5${\mu}m$. The deflection of cantilever beam is measured with the applied DC voltage. With the applied bias voltage from 0 to 50 V, the fabricated filters show 0.6 GHz(2.3%) at 26.6 GHz, and 0.8 GHz(2.5%) at 32 GHz center frequency shift for the lumped elements and resonators filter, respectively. The life time of the fabricated gold cantilever structure are tested.

• Journal of Power Electronics
• /
• v.13 no.6
• /
• pp.1058-1069
• /
• 2013

This paper proposes and designs a new output filter called an LCFL filter for application to three phase three wire shunt active power filters (SAPF). This LCFL filter is derived from a traditional LCL filter by replacing its capacitor with a C-type filter, and then constructing an L-C-type Filter-L (LCFL) topology. The LCFL filter can provide better switching ripple attenuation capability than traditional passive damped LCL filters. The LC branch series resonant frequency of the LCFL filter is set at the switching frequency, which can bypass most of the switching harmonic current generated by a SAPF converter. As a result, the power losses in the damping resistor of the LCFL filter can be reduced when compared to traditional passive damped LCL filters. The principle and parameter design of the LCFL filter are presented in this paper, as well as a comparison to traditional passive damped LCL filters. Simulation and experimental results are presented to validate the theoretical analyses and effectiveness of the LCFL filter.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.2
• /
• pp.144-148
• /
• 2005

The industrial development of large scale deep bed filters has been a very important step in the process of drinking water production and more recently in the tertiary treatment of wastewater. The target of deep bed filtration is the retention is the retention of small particles generally smaller than 30 microns at relatively small concentration, generally less than 30 mg/l from natural water (surface water or aquifers) or secondary treated wastewater. The relation between the retention efficiency and the characteristics of the particles has been extensively studied experimentally and through different models of retention. During the last years the development of new technologies (fiber filter, membrane modules) lead to more intensive processes compared to conventional sand filtration. Fiber filters can combine intensification with a decrease in specific energy needed however they cannot be operated under gravity like sand filters. Membrane filters (UF or MF) are much more intensive and efficient than sand filters. The specific energy needed is not so high (about $0.1Kwh/M^3$) but is higher than sand or fiber filter. A Life Cycle Analysis (LCA) has to be made for a complete comparison between these technologies taking in account that the efficiency of particle retention obtained by membrane filters is unique.

• The Journal of Korean Society for Radiation Therapy
• /
• v.8 no.1
• /
• pp.41-54
• /
• 1996

The secondary electrons developed by interaction between primary beam and a tray mounted for blocks in Megavoltage irradiation result in excess soft radiation dose to the surface layer. To reduce this electron contamination, electron filters have been used to be attached under a tray. Various filters with Cu and Al plates in six different thickness and Cu/Al combined plates in 3 different thickness were tested to measure the reduction rate of secondary electron contamination to the surface layer. The measurement to find optimal filter was performed on 6MV linear accelerator in $10 cm{\times}10 cm$ field size and fixed 78.5cm source to measurement points distance from surface to maximum build up point in 2mm intervals. The result was analyzed as the ratio of measured doses with using filters, to standard doses of measured open beam. The result of this study was fellowing : 1. The contaminated low energy radiation were mainly produced by blocking tray. 2. The surface absorbed dose was slowly increased by increasing irradiation field size but rapidly increased at field size above $15cm{\times}15cm$. 3. Al plate upto 2.5mm thickness used as a filter was found to be inadequate due to the failure of reduction of the surface absorbed dose below doses of the under surface upto the maximal build up. Cu 0.5mm plate and Cu 0.28mm/A1 1.5mm compound plate were found to be optimal filters. 4. By using these 2 filters, the absorbed dose to the surface were effectively reduced $5.5\%$ in field size $4cm{\times}4cm,\;11.3\%$ in field size $10cm{\times}10cm,\;22.3\%$ in field size $25cm{\times}25cm$. 5. In field size $10cm{\times}10cm$, the absorbed dose to the surface of irradiation was reduced by setting TSD 20cm at least,. but effective and enough dose reduction could be achieved by setting TSD 30cm as 2 optimal filters used. 6. More surface dose absorbed at TSD less than 7.4cm with a tray and filters together indicated that soft radiation was also developed by filters. 7. The variation of PDD by the different size of irradiation field was minimal as 2 optimal filters used. There was also not different in variation of PDD according to using any of two different filters. 8. PDD was not effected either by various TSD or by using the different filter among two.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.188-198
• /
• 2013

Maximally flat (MAXFLAT) half-band filters usually have wider transition band than other filters. This is due to the fact that the maximum possible number of zeros at $z={\pm}1$ is imposed, which leaves no degree of freedom, and thus no independent parameters for direct control of the frequency response. This paper describes a novel method for the design of FIR halfband filters with an explicit control of the transition-band width. The proposed method is based on a generalized Lagrange halfband polynomial (g-LHBP) with coefficients parametizing a 0-th coefficient $h_0$, and allows the frequency response of this filter type to be controllable by adjusting $h_0$. Then, $h_0$ is modeled as a steepness parameter of the transition band and this is accomplished through theoretically analyzing a polynomial recurrence relation of the g-LHBP. This method also provides explicit formulas for direct computation of design parameters related to choosing a desired filter characteristic (by trade-off between the transition-band sharpness and passband & stopband flatness). The examples are shown to provide a complete and accurate solution for the design of such filters with relatively sharper transition-band steepness than MAXFLAT half-band filters.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.3
• /
• pp.163-168
• /
• 2015

Many IP address lookup approaches employ Bloom filters to obtain a high-speed search performance. Especially, it has been recently studied that the search performance of trie-based algorithms can be significantly improved by adding Bloom filters. In such algorithms, the number of trie accesses can be greatly reduced because Bloom filters can determine whether a node exists in a trie without actually accessing the trie. Bloom filters do not have false negatives but have false positives. False positives can lead to unnecessary trie accesses. The false positive rate must thus be reduced to enhance the performance of lookup algorithms applying Bloom filters. One important characteristic of trie-based algorithms is that all the ancestors of a node are also stored. The proposed algorithm utilizes this characteristic in reducing the false positive rate of a Bloom filter without increasing the size of the memory for the Bloom filter. When a Bloom filter produces a positive result for a node of a trie, we propose to check whether the ancestors of the node are also positives. Because Bloom filters have no false negatives, the negatives of any of the ancestors mean that the positive of the node is false. In other words, we propose to use more Bloom filter queries to reduce the false positive rate of a Bloom filter in trie-based algorithms. Simulation results show that querying one ancestor of a node can reduce the false positive rate by up to 67% with exactly the same architecture and the same memory requirement. The proposed approach can be applied to other trie-based algorithms employing Bloom filters.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.1
• /
• pp.78-85
• /
• 1999

In this paper we propose a method to improve the performance of the mel-cepstrum that is widely used in speech recognition. Typically, the met-cepstrum is obtained by critical band filters that have fixed center spacing and bandwidth. However different filter characteristics produce a different mel-cepstrum, resulting in a different performance. In this paper we analyze triangular-shaped and rectangular-shaped filters. By changing the characteristics of filters such as center frequency and bandwidth, we analyze the performance of the met-cepstrum. Then utilizing the simplex method, we propose a method to optimize the critical band filters. Using the dynamic time warping, we performed speaker independent recognition experiments with Korean digit words pronounced by 10 males and 10 females. Experiments show that the rectangular-shaped filters show good performance and the mel-cepstrum obtained by the optimized filters shows better performance than filters that have fixed center spacing and bandwidth.

• Korean Journal of Optics and Photonics
• /
• v.14 no.5
• /
• pp.555-564
• /
• 2003

WDM thin film filters for fiber optical communication were designed using Fabry-Prot type multiple cavity filters and an equivalent thin film technique. As the number of cavities in multiple cavity filters increases, it becomes difficult to design the filters due to a great number of variables (the number of cavities, period of reflectors, order of spacers). To solve the problem of design, we treated the fewest variables, regarding symmetrical thin films as equivalent layers, and we applied structural and numerical formulas based on an analysis method of multiple cavity filters. The equivalent thin film technique was able to provide systematic and quantitative design of the WDM thin film filters.

• Honam Mathematical Journal
• /
• v.39 no.2
• /
• pp.199-216
• /
• 2017

In the paper [Y. B. Jun, B. Davvaz and A. Khan, Filters of ordered semigroups based on the fuzzy points, JIFS 24 (2013) 619-630]. Jun et al. discussed the notion of (${\in},{\in}{\vee}q_k$)-fuzzy left (resp., right) filters as a generalization of the notion of (${\in},{\in}{\vee}q$)-fuzzy left (resp., right) filters of ordered semigroups. In this article, we try to obtain a more general form that (${\in},{\in}{\vee}q_k$)-fuzzy left (resp., right) filters in ordered semigroups. The notion of (${\in},{\in}{\vee}q_k^{\delta}$)-fuzzy left (resp., right) filters is discussed, and several properties are investigated. Characterizations of an (${\in},{\in}{\vee}q_k^{\delta}$)-fuzzy left (resp., right) filter are established. A condition for an (${\in},{\in}{\vee}q_k^{\delta}$)-fuzzy left (resp., right) filter to be a fuzzy left (resp., right) filter is provided. The important achievement of the study with an (${\in},{\in}{\vee}q_k^{\delta}$)-fuzzy left (right) filter is that the notion of an (${\in},{\in}{\vee}q_k$)-fuzzy left ( right) filter and hence an (${\in},{\in}{\vee}q$)-fuzzy left (resp. right) filter are special cases of an (${\in},{\in}{\vee}q_k^{\delta}$)-fuzzy left (resp. right) filter, and thus several results in published papers are becoming corollaries of our results obtained in this paper.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.625-632
• /
• 2021

This paper studies the effect of the number of filters in the CNN (Convolutional Neural Network) layer on the performance of a noise attenuator. Speech is estimated from a noised speech signal using a 64-neuron, 16-kernel CNN filter and an error back-propagation algorithm. In this study, in order to verify the performance of the noise attenuator with respect to the number of filters, a program using Keras library was written and simulation was performed. As a result of simulation, it can be seen that this system has the smallest MSE (Mean Squared Error) and MAE (Mean Absolute Error) values when the number of filters is 16, and the performance is the lowest when there are 4 filters. And when there are more than 8 filters, it was shown that the MSE and MAE values do not differ significantly depending on the number of filters. From these results, it can be seen that about 8 or more filters must be used to express the characteristics of the speech signal.