• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.136-136
• /
• 2009

It is investigated the cut-off frequency of Z-cut quartz microstrip low pass filter by the variation of applied electric field. Designed microstrip filter was simulated using the Ensemble v7.0(Ansoft). As a result of the experiment, the cut-off frequency showed 50 MHz shift when the applied electric field was 3 kV/cm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.339-342
• /
• 1998

A high performance, high-dielectric stripline filter has been developed. The filter consists of planar resonators and its structure is made of high permittivity multilayer ceramic. The performance is distinctive with its attenuation pole. An equivalent lumped circuit is derived to explain the behavior of the attenuation pole quantitatively. A precise design procedure is also described.

• 한국전기전자재료학회논문지
• /
• 제16권7호
• /
• pp.593-598
• /
• 2003

In this paper, 3rd overtone mode energy-trapped filter using modified PbTiO$_3$ system ceramics was manufactured to apply for intermediate frequency(IF) SMD type fillet with splitted electrode and gap size. To investigate the effects of splitted electrode and gap size on filter characteristics of 3rd overtone mode energy-trapped filter, ceramic wafers were fabricated by etching splitted rectangular electrode size(b$\times$d) of b=0.4, 0.6, 0.8, 1mm, d=0.3, 0.4, 0.5, 0.6mm and gap size(c) c=0.2, 0.3, 0.4, 0.6mm, respectively. And then, SMD type ceramic filter were fabricated with the size of 3.7$\times$3.1$\textrm{mm}^2$. SMD type ceramic filter with the size of b=0.8mm, d=0.4mm and gap(c)=0.4mm, which showed insertion loss of 2.951dB, 3dB bandwidth of 54.7kHz and 20dB stop bandwidth of 129.27kHz, was suitable for IF bandpass filter application.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.385-386
• /
• 2008

In this paper, a simple dual band filter chip is designed with 0603 case size using IPD technology. The dual-band filter achieves high frequency band at 2.5 GHz and low frequency band at 1.8 GHz. The insertion losses in high frequency band and low frequency band are -0.195 dB and -0.146 dB, respectively. The return losses in these bands are -22.7 dB and -22.8 dB, respectively. The simple dual-band filter based on SI-GaAs substrate is designed within die size of about 1.3 $mm^2$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.173-175
• /
• 2005

The effects of PCB Board on the filter characteristics such as insertion loss and transmission characteristics were investigated for the measurement of 5GHz LC filter. Insertion loss measured with PCB Board of Teflon is 0.3 dB lower in comparion with FR-4. The filter characteristics measured in the passband were different from the calculated results. In comparison with the calculated value, the measured value shows that center frequency is 20MHz lower, passband is narrower and insertion loss is larger. The difference of Insertion loss between Teflon and FR-4 increases with increasing measurement frequency.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 추계기술심포지움논문집
• /
• pp.143-146
• /
• 2002

A multilayer two-stage bandpass filter using dissimilar low-temperature cofired-ceramic (LTCC) materials is proposed in this paper. The proposed bandpass filter is composed of ceramic substrates with different dielectric constant instead of single ceramic material from top to bottom layer. Inductive elements are designed in a low permittivity ceramic layer to reduce parasitic effects and loss, while capacitive elements are designed in a high pertimitivity ceramic layer for size reduction. The center frequency of the proposed filter is 1.842 GHz, and the performance of the filter is analyzed and compared with the conventional LTCC filter with single material in terms of integration density, size reduction, and performance improvement.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.325-326
• /
• 2007

SAW filter was designed by optimization technique using impulse sampling. To carry out characteristics of SAW filter the uniform IDT was adapted. And SAW filter was fabricated on $LiNbO_3$ substrates to evaluate frequency response. To apply properties of photolithography, lift off method was used. Lift off method was superior to etch method in fabrication process, frequency response property was measured by network analyzer. From a measurement of acoustic property, SAW propagation velocity was 2663.5m/sec.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.191-194
• /
• 1999

Recently, with the rapid development and demand for compactness of portable communications, the requirement for compact and low-cost filter is increasing. One of the methods for reducing size and cost is to use high dielectric constant and low loss dielectric material in filter. The other is new monoblock dielectric band-pass filter (BPF) which has holes in a single dielectric body without additional coupling elements. This structure effectively reduces the size and cost of the filters. For previous conventional coaxial type dielectric BPF, dielectric substrates were used for coupling between adjacent resonators and additional input and output ports were needed. Coupling between adjacent resonators of monoblock BPF can be otained via electrode pairs. Capacitances of electrode pair structure for coupling are intensively investigated by 3-D FEM. The BPF for PCS has been designed to have a 30 MHz pass-bandwidth with center frequency of 1855 MHz and an attenuation pole at below the passband using a commercial 3-D structure simulator.

• 한국습지학회지
• /
• 제14권4호
• /
• pp.471-478
• /
• 2012

본 연구의 목적은 폐기물에서 발생되는 소각재 용융슬래그의 여과재 활용가능성을 검증하는데 있다. 이를 위하여 소각재 용융슬래그의 여과재 기능을 수행할 수 있는지 안전성 검토를 수행하고, 일반적인 여과재로 사용되는 주문진 표준사를 대조군으로 하여 실제 여과실험을 수행함으로서 그 여과능을 분석하였다. 연구결과에 따르면 용융슬래그 여과재는 중금속 용출율이 지정폐기물 허용기준 내로 사용이 가능한 수준이며, 여과 실험 결과 SS와 COD의 경우 표준여과사와 유사한 수준의 여과능을 나타내었으며, T-N, T-P의 경우는 표준여과사 보다 소각용융슬래그가 T-N은 26.96%, T-P는 6.55% 더 높은 처리율을 보였다. 또한, 소각용융슬래그의 입경에 따른 제거율 비교를 수행한 결과 No.40#(0.43mm)와 혼입경의 경우 표준여과사와 동등 또는 그 이상의 여과능을 보였다. 따라서, 용융슬래그를 여과사로 활용할 경우 주문진 표준사에 비하여 자원절약과 자원재활용의 효과를 가져 올 수 있을 것으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.313-319
• /
• 1999

The properties of natural fiber filter are evaluated using laboratory experiments to find out the possibility of natural fiber drain as a substitute material of plastic board drain Experiments performed for natural fiber filter are effective opening size, permeability and clogging, Three filters were used in the experiment, which are constituted with the filter of different densities encircled with wefts and warps. The results were compared with those for the filter of MD88-80.