• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.11
• /
• pp.2089-2092
• /
• 2010

There are many cases that interrupt the production process because of malfunctions caused by electronic circuit boards which control equipment, but it is difficult to distinctly identify the causes in many cases. Especially, CMOS devices with the control logic circuit return automatically to normal state after their own faults. Therefore it is not easy to analyze the problems with electronic circuit boards. Recently, nuclear power plant experienced a failure due to the malfunction of electronic circuit boards and it was identified that the reason of the malfunction was because of latch-up phenomenon caused by external surge in electronic devices. This paper presents the causes and the phenomenon of latch-up by experiment and also a way using counter EMF diodes, noise filters and surge protective devices to prevent latch-up phenomenon from electronic circuit boards, finally confirms the effectiveness of the result by experiment.

• Environmental Engineering Research
• /
• v.10 no.2
• /
• pp.88-103
• /
• 2005

In this paper, data-driven modeling and multiresolution analysis (MRA) are applied for a full-scale wastewater treatment plant (WWTP). The proposed method is based on modeling by partial least squares (PLS) and multiscale monitoring by a generic dissimilarity measure (GDM), which is suitable for nonstationary and non-normal process monitoring such as a biological process. Case study in an industrial plant showed that the PLS model could give good modeling performance and analyze the dynamics of a complex plant and MRA was useful to detect and isolate various faults due to its multiscale nature. The proposed method enables us to show the underlying phenomena as well as to filter out unwanted and disturbing phenomena.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.11
• /
• pp.2281-2285
• /
• 2009

Powerline communication is the data signal which is modulated by carrier frequency through the installed powerline at in-home or office is transmitted and received signals are separated into data signal with using band-pass filter which cent-frequency is carrier frequency. The home gateway, an equipment which works as an gateway for ubiquitous home network, relays all functions of a home network. The home gateway must always be connected in order to provide seamless services. However it gives unfavorable power consumption. Therefore the needs for working in maximum power saving mode while there is no data traffic and for invoking to the normal function when it is necessary. So, in this paper we survey the development of low power PLC modem monitoring of power consumption and breaking abnormal power in the home Network.

• Economic and Environmental Geology
• /
• v.32 no.6
• /
• pp.653-660
• /
• 1999

Any mechanical system has a natural oscillation which can be excited, and the earth is no exception. The earth can oscillate in an indefinite number of normal modes of oscillation, rather like a giant bell. The various free modes are generally sparated into two categoridal modes and toroidal modes. Clearly the toroidal modes will produce no perturvation of the gravity field and no vertical acceleration on the surface of the earth. Hence only spheroidal modes can be detected with a gravimeter. EarthTide gravimeter was installed at AIMST in order to observe free modes of the earth. Eight major earthquakes including chinese earthquake (magnitude 7.3) with free oscillations of the earth are observed during one year (1998. 8. 1∼1999.7.31). And then the earth tides components were eilminated from earthquake records using a numerical Butterworth highpass filter. Spectral analysis of gravity readings repersent that 48 observations of shheroidal modes. The relationships between instrumental observations and theoretical predictions based on the Gutenberg earth model agree well those resulting from free oscillation in Korea.

• Journal of Information Processing Systems
• /
• v.17 no.4
• /
• pp.737-753
• /
• 2021

As the demand for high-quality rendering for mixed reality, videogame, and simulation has increased, global illumination has been actively researched. Monte Carlo path tracing can realize global illumination and produce photorealistic scenes that include critical effects such as color bleeding, caustics, multiple light, and shadows. If the sampling rate is insufficient, however, the rendered results have a large amount of noise. The most successful approach to eliminating or reducing Monte Carlo noise uses a feature-based filter. It exploits the scene characteristics such as a position within a world coordinate and a shading normal. In general, the techniques are based on the denoised pixel or sample and are computationally expensive. However, the main challenge for all of them is to find the appropriate weights for every feature while preserving the details of the scene. In this paper, we compare the recent algorithms for removing Monte Carlo noise in terms of their performance and quality. We also describe their advantages and disadvantages. As far as we know, this study is the first in the world to compare the artificial intelligence-based denoising methods for Monte Carlo rendering.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.9
• /
• pp.3186-3203
• /
• 2021

In this paper, a multi-scale local difference directional number (MLDDN) pattern is proposed for pig identification. Firstly, the color images of individual pig are converted into grey images by the most significant bits (MSB) quantization, which makes the grey values have better discrimination. Then, Gabor amplitude and phase responses on different scales are obtained by convoluting the grey images with Gabor masks. Next, by calculating the main difference of local edge directions instead of traditionally edge information, the directional numbers of Gabor amplitude and phase responses are encoded. Finally, the block histograms of the encoded images are concatenated on each scale, and the maximum pooling is adopted on different scales to avoid the high feature dimension. Experimental results on two pigsties show that MLDDN impressively outperforms the other widely used local descriptors.

• Journal of the Korean Society of Safety
• /
• v.37 no.5
• /
• pp.14-21
• /
• 2022

The purpose of this study was to apply the signal pattern recognition technique to the digital wireless fire-alarm system and to reduce unwanted fire alarms. In this study, the fire alarms of the K Institute, which operates the largest digital wireless fire-alarm system in Korea, were classified into normal operations and unwanted fire alarms, and these were analyzed and compared with actual fire signals. In addition, by designing a non-fire signal filter and applying it to the K Institute, we confirmed that the monthly unwanted fire alarm rate of all 5,713 detectors decreased sharply. In particular, the unwanted fire alarm rate for flame decreased from 1.09% to 0.11% and the unwanted fire alarm rate for smoke decreased from 0.65% to 0.035%.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.17 no.6
• /
• pp.337-346
• /
• 2022

This paper addresses the problem of vision-based ear loops ansd attachment inspection in mask production lines. This paper focuses on connections with ear loops and mask filter by an efficient combined approach. The proposed method used a template matching, shape detection and summation of histogram with preprocessing. We had a parameter for detecting defects heuristically. If the shape vertices are lower than the parameters our proposed method will find defective mask automatically. After finding normal masks in mask ear loops attachment status inspection algorithm our proposed method conducts attachment amount inspection. Our experimental results showed that the precision is 1 and the recall is 0.99 in the mask attachment status inspection and attachment amount inspection.

• Journal of Korea Multimedia Society
• /
• v.25 no.4
• /
• pp.559-567
• /
• 2022

The optimal shipping location is determined by measuring the volume and weights of cargo shipped to non-standard cargo carriers. Currently, workers manually measure cargo volume, but automate it to improve work inefficiency. In this paper, we proposed the method of a real-time volume calculation using LiDar sensor for automating cargo measurement of non-standard cargo. For this purpose, we utilized the statistical techniques for data preprocessing and volume calculation, also used Voxel Grid filter to light weighted of data which are appropriate in real-time calculation. We implemented the function of Normal vectors and Triangle Mesh to generate surfaces and Alpha Shapes algorithms to process 3D modeling.

• Journal of Korea Game Society
• /
• v.9 no.2
• /
• pp.135-142
• /
• 2009

Mesh denoising is a method to remove noise applying various filters. However, those methods usually spend much time since filtering is performed on CPU. Because GPU is specialized for floating point operations and faster than CPU, real-time processing for complex operations is possible. Especially mesh denoising is adequate for GPU parallel processing since it repeats the same operations for vertices or triangles. In this paper, we propose mesh denoising algorithm based on bilateral filtering using GPU parallel processing to reduce processing time. It finds neighbor triangles of each vertex for applying bilateral filter, and computes its normal vector. Then it performs bilateral filtering to estimate new vertex position and to update its normal vector.