• Journal of the Korean Wood Science and Technology
• /
• 제32권6호
• /
• pp.23-35
• /
• 2004

The goal of study was to investigate the influence of the acrylated urethane oligomer on mechanical properties, the chemical resistance and thermal resistance of the UV curable urethane acrylate coatings for fancy veneer overlayed plywood flooring. The pencil hardness and abrasion resistance of the coated fancy veneer overlayed plywood floorings increased with increasing the acrylate functionality of the acrylated urethane oligomer. In the case of the UV cured film containing hexa-functional acrylated aliphatic urethane oligomer, high discoloration of the coated fancy veneer overlayed plywood flooring was observed near the cracks at the beginning of the chemical treatment. In this study, it was found that the degradation of the UV cured film caused by an alkaline reagent was higher than that of the UV cured film caused by an acidic treatment.

• 마이크로전자및패키징학회지
• /
• 제12권1호
• /
• pp.1-7
• /
• 2005

저항 값을 맞추기 위한 트리밍 공정이 낮은 저항온도계수와 높은 정밀성을 요구하는 박막저항기 특성에 미치는 영향에 대한 연구가 수행되었다. 스퍼터링 방법으로 제조된 박막 저항기의 트리밍 속도에 따른 저항기의 특성 변화와 온도계수의 변화가 관찰되었다. 트리밍 속도의 증가에 따라서 박막 저항기 특성은 저하되었으며, 열처리로 저항 값의 평균 편차 $0.26\%$ 및 저항온도계수 52.77(ppm/K)의 개선효과가 있었다. 1k$\Omega$와 10k$\Omega$저항기가 100k$\Omega$ 박막저항기 보다는 특성이 양호하였으며, 트리밍 속도의 치적 조건으로는 20mm/sec와 특성 개선을 할 수 있는 최적 열처리 온도는 593K였으며 최적 조건에서 제작된 저항기의 저항 값의 평균 편차는 $0.31\%$ 및 저항온도계수 10(ppm/K)미만이었다.

• 대한토목학회논문집
• /
• 제32권3D호
• /
• pp.223-229
• /
• 2012

도로 포장면과 타이어 사이의 마찰 저항을 미끄럼 저항이라고 한다. 미끄럼 저항은 도로 안전에 매우 중요한 요소이며, 다양한 요인이 복합적으로 작용한다. 미끄럼 저항 측정법의 한계를 극복하기 위해 컴퓨터 모델링을 이용한 해석 수행 결과, 속도가 증가하거나 수막두께가 두꺼울수록 미끄럼 저항은 감소하였다. 해석 결과를 이용해 수막두께와 속도에 따라 수막 위를 주행하는 타이어에 발생하는 양력을 계산할 수 있으며, IFI(International Friction Index) 미끄럼 저항 예측모델과 실측 미끄럼 저항과의 차이를 줄이기 위해 양력을 반영한 수정 IFI 미끄럼 저항 예측모델을 개발하였다. 예측모델과 실측 데이터의 상관관계 분석 결과, 기존 IFI 예측모델의 $R^2$는 0.49로, 수정 IFI 예측모델의 $R^2$는 0.64로 나타나 수정 IFI 예측모델이 기존모델에 비해 예측 효과가 우수하였다. 포장면의 상태에 따른 수막두께를 수정 예측모델에 반영할 경우 더욱 정확한 예측모델을 얻을 수 있을 것이다.

• Journal of Electrochemical Science and Technology
• /
• 제12권3호
• /
• pp.330-338
• /
• 2021

An integral electrode-bipolar plate assembly, which is composed of electrode, conductive adhesive film (CAF) and bipolar plate, has been developed and evaluated for application with a vanadium redox flow battery (VRB) to decrease contact resistance between electrode and bipolar plate. The CAF, made of EVA (ethylene-vinyl-acetate) material with carbon black or CNT (Carbon Nano Tube), is applied between the electrode and the bipolar plate to enable an integral assembly by adhesion. In order to evaluate the integral assembly of VRB by adhesive film, the resistivity of integral assembly and the performance of single cell were investigated. Thus, it was verified that the integral assembly is applicable to redox flow battery. Through resistance and contact resistance of bare EVA and CAF films on bipolar plate were changed. Among the adhesive films, CAF film coated with carbon black showed the lowest value in through resistance, and CAF film coated with CNT showed the lowest value in contact resistance, respectively. The efficiency of VRB single cell was improved by applying CAF films coated with carbon black and CNT, resulting in the reduced overvoltage in charging process. Therefore, the energy efficiency of both CAF films, about 84%, were improved than that of blank cell, about 79.5 % under current density at 40 mA cm^-2. The energy efficiency of the two cells were similar, but carbon black coated CAF improved the coulomb efficiency and CNT coated CAF improved the voltage efficiency, respectively.

• 한국전기전자재료학회논문지
• /
• 제23권11호
• /
• pp.901-905
• /
• 2010

PV module has many power loss factors, and series resistance is the most important elements of them. It is therefore easy to expect the partial shading decrease the lifetime of the semiconductor depletion layer in thin film PV module. Different shading losses could be related with the hot spot which is critical in expecting the reliability issue. In this paper we have modelled the series resistance of the PV module with both different direction of the cell line and shading area of the panel. From the results, thin film a-Si PV module has shown different properties by shading direction.

• 대한금속재료학회지
• /
• 제47권10호
• /
• pp.644-651
• /
• 2009

The passivation (or deactivation) of a metal surface during oxide film formation has been quantitatively explored for a ferritic stainless steel by using dynamic electrochemical impedance spectroscopy (DEIS). For this purpose, the electrochemical impedance spectra were carefully examined as a function of applied potential in the active nose region of the potentiodynamic polarization curve, to separate the charge transfer resistance and oxide film resistance. From the discrepancy in the potential dependence between the experimental charge transfer resistance and the semi-empirically expected one, the degree of passivation could be quantitatively estimated. The sensitivity of passivation of the steel surface to anodic potential, which might be the measure of the quality of the oxide film formed under unit driving force or over-potential, decreased by 31% when 3.5 wt% NaCl was added to a 5 wt% $H_2SO_4$ solution.

• Corrosion Science and Technology
• /
• 제20권3호
• /
• pp.152-157
• /
• 2021

Stainless steel is a metal that does not generate rust. Due to its excellent workability, economic feasibility, and corrosion resistance, it is used in various industrial fields such as ships, piping, nuclear power, and machinery. However, stainless steel is vulnerable to corrosion in harsh environments. To solve this problem, its corrosion resistance could be improved by electrochemically forming an anodized film on its surface. In this study, 316L stainless steel was anodized at room temperature with ethylene glycol-based 0.1 M NH₄F and 0.1M H₂O electrolyte to adjust the thickness of the oxide film using different anodic oxidation voltages (30 V, 50 V, and 70 V) with time control. The anodic oxidation experiment was performed by increasing the time from 1 hour to 7 hours at 2-hour intervals. Corrosion resistance according to the thickness of the anodic oxide film was observed. Electrochemical corrosion behavior of oxide films was investigated through polarization experiments.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.80-83
• /
• 2000

본 연구에서는 유기물 전자소자 개발을 위한 기초 연구로서 증착시 기판의 온도, 증칙비, 열처리 온도에 따른 펜타신 박막의 수평방향 전기전도도, 접촉저항, 면저항 둥 전기적 특성을 측정 하였다. 시료는 분말형 펜타신을 유기분자선 성막장치(OMBD)를 이용하여 성막 하였다. 전도도 계산을 위한 두께의 측정은 $\alpha$-step을 이용하였으며, TLM(transfer length method)으로 접촉저항, 면저항등 전기적 특성을 측정하였다. 전극은 Au를 사용하여 진공 증착법으로 제작하였다. 기판의 온도는 3$0^{\circ}C$, 4$0^{\circ}C$, 5$0^{\circ}C$, 6$0^{\circ}C$, 7$0^{\circ}C$, 8$0^{\circ}C$, 10$0^{\circ}C$ 일곱 종류로 하여 증착비를 달리 하였고, 열처리에 의한 효과는 10$0^{\circ}C$에서 증착한 시료를 10$0^{\circ}C$, 14$0^{\circ}C$에서 각각 10초간 열처리를 실시하였다. 기판 온도에 따른 막의 형상은 AFM을 이용하여 관찰하였다. 기판의 온도가 상승할수록 박막의 결정화가 활발히 진행되었으며 최대단일결정은 4$\mu\textrm{m}$였다. 전기전도도는 7.40$\times$$10^{-7}$ S/cm ~ 0.778$\times$$10^{-5}$ S/cm의 값을 나타내었으며, 접족저항은 10$0^{\circ}C$에서 증착하고 14$0^{\circ}C$에서 10초간 열처리 한 경우 2.5324㏁으로 가장 작았으며, 면저항은 약간의 차이는 있으나 전체적으로 ≒ $10^{9}$ Ω/ 의 값을 보였다

• 한국염색가공학회지
• /
• 제16권4호
• /
• pp.19-25
• /
• 2004

Both poly(vinyl alcohol)$(PVA)-I_2$ and PVA-dye polarizing film were prepared using PVA with number-average degree of polymerization of 1,700, 2,300, 2,600. The optical property of used dye in this study closed to the that of iodine. The PVA-dye polarizing film was prepared through the dyeing process. In comparison of the result of the measurement of the heat and humidity resistance of two types polarizing films, it of PVA-dye polarizing film was higher than that of a conventional $PVA-I_2$polarizing film. The transmittance and the polarization efficiency of PVA-dye polarizing film was significantly influenced by dye concentration, dipping time, salt concentration, and temperature of dye bath. The PVA-dye polarizing film exhibited a high polarization efficiency of 99.3% and a good transmittance of 42.4%.

• Corrosion Science and Technology
• /
• 제3권6호
• /
• pp.240-244
• /
• 2004

Recently a variety of electrochemical techniques have been used for the measurement of under-film corrosion of coated steel. Each method has its own characteristic and is suitable to determine some kinds of anti-corrosive mechanisms of coating film. We developed a new under-film corrosion tester (UFCT) which adoped current interrupter technique in principle. Electrochemical parameters can be measured by UFCT. It is possible for the novel under-film corrosion tester to evaluate under-film corrosion of steel covered with high electric resistance coating film which has no defect and is not easy to evaluate it by other methods. Finally some experimental results of protective coating performance obtained by UFCT were discussed.