• 트랜스-
• /
• 제4권
• /
• pp.37-63
• /
• 2018

무용과 영상 테크놀러지의 결합으로 시작된 무용영화는 새로운 장르로 자리매김하며 발전되어오고 있다. 해외에서는 이미 1950년대부터 실험적인 무용영화가 창작되었고 댄스필름협회가 조직되었으며 많은 무용영화제가 개최되고 있다. 그러나 국내에서 무용영화라는 장르에 대한 인식과 창작활동이 본격적으로 시작된 것은 얼마 되지 않았다. 이러한 상황 속에서 '서울무용영화제' 개최와 '댄스필름 프로젝트'의 창작적 실험은 국내의 무용영화 발전에 중요하다. 따라서 본 논문에서는 무용영화에 대한 개념과 발전과정, 해외 여러 무용영화제와 '서울무용영화제'의 현황과 특징을 살펴보고, '서울무용영화제'와 '댄스필름 프로젝트'의 역할과 기능, 그리고 이들의 협업으로 인한 기대효과를 분석하며 국내 무용영화의 발전 가능성에 대해 논의했다. '댄스필름 프로젝트'는 댄스필름 제작의 교육과 실험의 장으로, '서울무용영화제'는 무용영화 제작자 발굴, 작품 상영, 관객과의 대화, 국제교류, 유통 등의 플랫폼이 된다. 무용영화제는 무용영화의 과거와 현재의 흐름을 인식하고 미래를 전망해 볼 수 있는 살아있는 컨텐츠로서의 가치를 내재하고 있다. 이 두 단체의 상생과 발전은 국내 무용영화 발전에 긍정적인 역할을 다 할 것이라 기대된다.

• 한국콘텐츠학회논문지
• /
• 제13권10호
• /
• pp.226-233
• /
• 2013

본 연구는 영화 소비 과정을 탐색하기 위해 영화 취향 및 영화 정보 이용 요인들, 인구사회 요인들을 투입해 영화 소비에 미치는 영향을 살펴보았다. 본 연구의 주요 결과들은 다음과 같다. 첫째, 영화 소비에 가장 큰 영향을 미치는 요인은 영화 취향으로 나타났다. 응답자들은 영화 취향 정도가 증가할수록 영화소비가 늘어나는 것으로 나타났다. 둘째, 영화 취향은 영화 정보를 인터넷으로 검색하거나 영화 블로그를 이용하는 행위에 유의미한 영향을 미치는 것으로 나타났다. 영화 취향 정도가 높을수록 인터넷으로 영화정보를 검색하거나 영화 블로그를 이용하는 것으로 나타났다. 한편, 영화 블로그를 이용하는 응답자들은 영화 소비가 늘어났던 반면 영화 인터넷 검색 여부는 영화 소비에 영향을 미치지 않았다. 셋째, 성별이나 소득과 같은 인구사회 요인들 중에서 성별 요인만 영화 소비에 정적인 영향을 미치는 것으로 나타났다. 여성 응답자일수록 영화 소비 정도가 증가했다. 반면, 소득 요인은 영화 소비에 영향을 미치지 않았다.

• 한국전기전자재료학회논문지
• /
• 제26권6호
• /
• pp.425-428
• /
• 2013

In this paper, we present a novel hydrophilic coating material (Wellture Finetech, Korea) which can be utilized as a coating layer for anti-contamination for electrical and electronic system. The coating material was deposited on 4 inch silicon wafer with several different film thickness. The film thickness was controlled by spin coating speed. After curing of the film, we have scratched by permanent marker to check self-cleaning property of the film. Also we have executed several mechanical tests of the films. As the spin coating speed is increased, the film thickness was thinned from 230 nm to 125 nm. Contact angle of the film was lowered from $30^{\circ}$ to $12^{\circ}$ as the spin coating speed is increased from 700 to 2,500 rpm. On permanent marker scratched film surface coated at 1,000 rpm, we have poured regular city water to investigate self cleaning property of the film. The scratches were gradually separated from the film surface due to super-hydrophilicity of the film. Hardness of spin coated film was 9H measured by ASTM D3363 method. and adhesion of all film was 5B tested by ASTM D3359 method. Also, to get exact hardness value of the film, we have utilized a nano-indenter. As spin speed is increased, the hardness of film was increased from 3 GPa to 5 GPa.

• Corrosion Science and Technology
• /
• 제5권4호
• /
• pp.137-140
• /
• 2006

The effect of pre-existing barrier-type film on porous aluminum oxide film formation during anodization was investigated to control the uniform film growth rate. Initial potential fluctuations during anodization indicated that the breakdown of barrier-film is preceded before the porous formation and the induction time for the porous film growth increases with the increases of pre-existing film thickness. The porous film growth mechanism is lot affected by the presence of barrier film on aluminum surface. In parallel, uniform growth of barrier film underneath the porous structure was attained by two-step anodization processes.

• 소성∙가공
• /
• 제20권3호
• /
• pp.250-256
• /
• 2011

Vacuum-assisted thermoforming is one of the critical steps for the successful application of film insert molding(FIM) to parts of complex shapes. If the thickness distribution of the formed film is non-uniform, cracking, deformation, warping, and wrinkling can easily occur at the injection molding stage. In this study, the effects of processing parameters, which include the film heating time, plug depth, plug speed and vacuum delay time, on film thickness distribution were investigated. It was found that the film thickness at the part sidewall decreases with increasing the film heating time and plug depth, but the thickness at the bottom was found to exhibit the opposite behavior. The film thickness of the sidewall was observed to increase at higher plug speed and vacuum delay time of 0 ~ 0.3sec.

• 한국의류학회지
• /
• 제10권2호
• /
• pp.79-84
• /
• 1986

Methacrylic acid was graft polymerized with benzoyl peroxide in itiator onto the commercial PET film. Graft polymerization was carried out in emulsion, which consisted of BPO (1), chlorobenzene(8) as swelling agent, tween 80(1) and sodium lauryl sulfate(1) as emulsifier and water(1,000). Original PET film has poor reactivities and, so the film preswdled with benzyl alcohol($150^{\circ}C$, 1hr) was also examined. The graft yield of PET film was increased with reaction temperature and monomer concentration. The graft yield of preswelled PET film was higher than that of no-treated PET film. Moisture regain was linearly increased with graft yield. DSC thermodiagram showed the Tm of grafted PET film was same as that of original PET film. Grafted PET film was dyed with methylene blue solution. The photograph of the cross section showed that grafting was occured not at the center but near surfaces.

• Tribology and Lubricants
• /
• 제19권4호
• /
• pp.195-202
• /
• 2003

Many computational researches have been performed about EHL film thickness in the contact between cam and follower in the engine valve train system. However, those computations do not explain the characteristics of dynamic film thickness which means squeeze film effect. Without the consideration of transient term in the Reynold's equation, the predicted film thickness from steady state condition has large difference from the actual film thickness. In this study, we have investigated the kinematic and dynamic simulations of rocker-arm valve train system. From the dynamic simulation, the applied load and the entraining velocity of the lubricant between cam and follower are obtained and with these values the dynamic film thickness is computed by Newton-Raphson method and compared with the steady state film thickness.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.991-994
• /
• 2005

We have successfully commercialized a novel optical compensation film, OCB-WV film, for OCB-LCD-TVs which has fast response time and wide viewing angle. The OCB-WV film consists of a 45degree-aligned discotic layer and a high Rth biaxial TAC film, which is suited for a roll-to-roll polarizer manufacturing process. This OCB-WV has brought out the excellent features that OCB intrinsically has, making nextgeneration fast-response LCD-TVs possible and free from image blurring in conjunction with an impulsive driving scheme.

• Journal of Mechanical Science and Technology
• /
• 제19권5호
• /
• pp.1065-1071
• /
• 2005

In this study, residual stress distribution in multi-stacked film by MEMS (Micro-Electro Mechanical System) process is predicted using Finite Element method (FEM). We evelop a finite element program for residual stress analysis (RESA) in multi-stacked film. The RESA predicts the distribution of residual stress field in multi-stacked film. Curvatures of multi­stacked film and single layers which consist of the multi-stacked film are used as the input to the RESA. To measure those curvatures is easier than to measure a distribution of residual stress. To verify the RESA, mean stresses and stress gradients of single and multi layers are measured. The mean stresses are calculated from curvatures of deposited wafer by using Stoney's equation. The stress gradients are calculated from the vertical deflection at the end of cantilever beam. To measure the mean stress of each layer in multi-stacked film, we measure the curvature of wafer with the left film after etching layer by layer in multi-stacked film.

• 한국분무공학회지
• /
• 제23권1호
• /
• pp.36-41
• /
• 2018

Fuel wall film effects power output and cycle deviation by changing the amount of fuel flowing into cylinder in PFI gasoline engines. Reduction of wall film can reduce fuel consumption and improve combustion stability. In this research, the effects of injection strategies including injection pressure and dual injection system is investigated for reducing wall film formation. The CONVERGE software is used for numerical analysis tool and O'Rourke film splash model was used for wall film prediction model. Compared with the reference case wall film decreased with increase of injection pressures, and the film formation reduced when the dual injection system was used.