• 농업과학연구
• /
• 제40권3호
• /
• pp.203-208
• /
• 2013

Differences in the filling amount of substrates in container can influence severely on the soil physical properties and crop growth. This research was conducted to secure the fundamental informations related to the changes in soil physical properties as influenced by the filling amount of coir dust-based substrates in container. For the experiment, three substrates were formulated by blending coir dust (CD) with expanded rice hull (CD+ERH, 8:2, v/v), carbonized rice hull (CD+CRH, 6:4, v/v) or ground and aged pine bark (CD+GAPB, 8:2, v/v). Based on the optimum bulk density, the amount of substrates filled in 347.5mL aluminum cylinder were adjusted to 90, 100, 110, 120, and 130%. Then the changes in total porosity (TP), container capacity (CC), and air-filled porosity (AFP) by various filling amounts were measured. The TP decreased linearly in CD+ERH and CD+GAPB and quadratically in CD+CRH as the filling amounts of the media increased from 90% to 130%. The CC in CD+ERH and CD+GAPB media increased as the filling amount increased from 90% to 120%, then decreased in 130%, showing quadratic change. The CC in CD+CRH was the highest in 90% filling amount and decreased gradually as the filling amount of root medea increased. The AFPs in CD+ERH and CD+GAPB media were 38 and 37%, respectively in 90% filling amount and they decreased drastically until 110% filling, then gradually in 120 and 130% filling amount showing the quadratic changes. The AFP of CD+CRH at 90% filling amount was 22% and it decreased as the filling amount increased until 130%, showing linear change. These results indicate that the increase in filling amount of substrates influenced more severely the AFP than CC, and careful consideration on container filling is required to provide a better root condition thus maximize crop growth.

• Korea-Australia Rheology Journal
• /
• 제21권1호
• /
• pp.71-79
• /
• 2009

The incomplete saturation and the void formation during the resin infiltration into fibrous porous media in the resin transfer molding process cause failure in the final product during its service. In order to better understand flow behavior during the filling process, a finite-element scheme for transient flow simulation across the micro-structured fibrous media is developed in the present work. A volume-of- fluid (VOF) method has been incorporated in the Eulerian frame to capture the evolution of flow front and the vertical periodic boundary condition has been combined to avoid unwanted wall effect. In the microscale simulation, we investigated the transient filling process in various fiber structures and discussed the mechanism leading to the flow fingering in the case of random fiber distribution. Effects of the filling pressure, the shear-thinning behavior of fluid and the volume fraction on the flow front have been investigated for both intra-tow and the inter-tow flows in dual-scale fiber tow models.

• 정보저장시스템학회논문집
• /
• 제1권2호
• /
• pp.192-196
• /
• 2005

In this paper, we investigated the possibility of replicating patterned media by nano-injection molding process with a metallic nano-stamper. The original nano-master was fabricated by E-beam lithography and ICP etching process. The metallic nano-stamper was fabricated using a nanoimprint lithography and nano-electroforming process. The nano-patterned substrate was replicated using a nano-injection molding process without additional etching process. In nano-injection molding process, since the solidified layer, generated during the polymer filling, deteriorates transcribability of nano patterns by preventing the polymer melt from filling the nano cavities, an injection-mold system was constructed to actively control the stamper surface temperature using MEMS heater and sensors. The replicated polymeric patterns using nano-injection molding process were as small as 50 nm in diameter, 150 nm in pitch, and 50 nm in depth. The replicated polymeric patterns can be applied to high density patterned media.

• 방송공학회논문지
• /
• 제26권3호
• /
• pp.327-330
• /
• 2021

본 논문에서는 3D 오디오 부호기의 성능 향상을 위해 새로운 잡음 채움 기법을 제안한다. 제안한 잡음 채움 기법에서는 핵심 대역을 IGF 시작 주파수까지가 아니라 MAX_SFB로 설정되는 영역까지로 제한한다. 그리고, IGF 입력 패치의 모든 주파수 영역에 잡음 채움이 수행되도록 한다. 본 논문에서 수정된 잡음 채움 기법의 성능은 MUSHRA 테스트를 통해 평가되었고, 그 결과 기존의 방법보다 우수한 성능을 보임을 입증한다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2012년도 하계학술대회
• /
• pp.260-261
• /
• 2012

본 논문에서는 Unified Speech and Audio Coding (USAC)에 적용된 Noise Filling의 부호화 과정에서 음질 왜곡 정도에 따라 Noise level을 설정하는 방법을 제안한다. USAC는 Moving Picture Experts Group (MPEG)에서 표준화한 최신의 음성/오디오 통합 코덱으로 현존하는 코덱 중에 최고의 성능을 가지고 있다. 하지만, 복호화기 기술만 표준화하여, 인코더를 설계하는 방법에 따라 음질의 차이가 존재한다 현재 오픈 소스 기반으로 진행되고 있는 프로젝트 JAME에서는 이러한 음질 차이를 극복하고, USAC에 적용된 핵섬 인코더 기술의 성능을 최대화 할 수 있는 여러 가지 방법을 포함하고 있다. 그 중 Noise Filling은 저 전송률 부호화 과정에서 양자화 되지 않는 스펙트럼에 대하여 일정한 noise level을 넣어 인지적으로 음질을 향상시키는 방법이다. 제안된 Noise Filling 부호화 방법은 현재 프레임의 음질 왜곡 정도를 반영하여, noise-like 신호 성분을 더욱 정교하게 부호화 할 수 있게 하였다.

• 스마트미디어저널
• /
• 제3권4호
• /
• pp.28-34
• /
• 2014

최근 깊이 영상 기반 합성 방법을 이용한 가상시점 합성 방법이 3차원 영상의 적용 분야에서 많이 사용되고 있다. 가상 시점 영상은 기존에 알고 있는 영상과 이와 관련된 깊이 영상 정보를 이용하여 카메라로 촬영 하지 않은 가상시점 영상을 생성하게 된다. 하지만 깊이 영상 기반 합성 방법을 이용해 가상시점 영상을 생성할 경우, 깊이 영상을 기반으로 합성하기 때문에 이미지 워핑 과정에서 폐색 영역이 발생하게 된다. 이러한 폐색 영역을 제거하기 위해 지금까지 다양한 홀 채움 방법들이 제안되어 왔다. 동일 색상영역 검색, 수평방향 보간 방법, 수평방향 보외 방법 그리고 다양한 인페인팅 방법들이 홀 채움 방법들로 제안되었다. 하지만 이러한 방법들을 사용하여 텍스쳐 영역의 홀을 제거할 경우 다른 종류의 간섭 현상이 발생하는 문제가 있다. 본 논문에서는 이러한 문제점을 해결하기 위해 다양한 방향성을 고려한 홀 채움 방법을 새롭게 제안하여 확장된 홀 영역을 효율적으로 채우는 방법을 설명한다. 제안된 방법들은 복잡한 텍스쳐들이 있는 배경부분에서 발생하는 홀 영역을 채울 때 성능 효율성을 나타낸다. 방향성을 고려한 홀 채움 방법은 픽셀 단위로 홀 채움 영역 값을 측정하는 과정에서 홀 영역의 주변 텍스쳐 픽셀 값들을 사용하게 된다. 제안한 방법을 이용해 가상시점 영상 합성 결과 발생하는 홀 영역을 기존의 홀 채움 방법보다 보다 더 효율적으로 채울 수 있는 것을 확인할 수 있었다.

• Advances in Traditional Medicine
• /
• 제10권4호
• /
• pp.231-238
• /
• 2010

Sterile Products may be broadly classified into two main categories, according to the manner in which they are produced: those which are sterilized after the product has been filled and sealed in the final container(s) ("terminally sterilized" products) and those where the sterilization stage (or stages) takes place is it before or after the bulk product filled in to final container. In this latter instance, all subsequent processing (typically, the filling and sealing operations) must be conducted aseptically in order to prevent recontamination of the sterilized product. The two most common pharmaceutical applications of aseptic processing methods are (a) the filling of liquid products following sterilization by filtration and (b) the filling of previously sterilized bulk powder products. An aseptic processing operation should be tested using a microbiological growth medium (media fill) during lyophilized injection formulation, filling, loading, lyophilisation, stoppering, and unloading activities.

• 치과방사선
• /
• 제17권1호
• /
• pp.123-135
• /
• 1987

The author observed the effects of retrograde infusion of water soluble contrast media (Tele- brix 30) on the rabbit submandibular glands and compared the effects of different degrees of filling. 26 rabbits were divided into 2 groups of 12 each as experimentals and I group of 2 as normal controls. One experimental group was filled with 0.2㎖ and the other with 0.4㎖. Right submandibular gland of each rabbit was infused with contrast media and left one with physiologic saline as a experimental control, at a constant rate of 0.12㎖/min. using an infusion pump via the main excretory duct. Immediately after the infusion of contrast media, oblique lateral radiographs of the glands were made with occlusal film in order to confirm the glandular filling. The rabbits were sacrificed after varying periods (1, 8, 24 hours and 3, 6, 10 days) and the tissues were prepared for light and electron microscopic examination. The results were as follows: 1. In glands filled with 0.2㎖ contrast media, the initial changes were a few vacuole formation in the acini and slight dilation of the intralobular duct. The moderately severe changes such as vacuole formation in the acini, the abnormal substructure within the secretory granule, dilation of acinar and intercalated duct lumen, scalloping of striated duct lumen and inflammatory cell infiltrate were observed at 3 days. The general appearance was successively recovered, so the tissue had a normal appearance at 10 days. 2. In glands filled with 0.4㎖ contrast media, the most prominent alterations such as severe acinar atrophy, decreased number of secretory granules, proliferation of connective tissue stroma and pronounced inflammatory cell infiltrates appeared at 6 days. Although the general appearance returned to be almost normal at 10 days, acinar cells showed some atrophy and decreased secretory granules. 3. In glands subjected to 0.4㎖ infusion, the alterations were more severe and the recovery was slower than those seen in the glands to 0.2㎖ infusion.

• International journal of advanced smart convergence
• /
• 제13권1호
• /
• pp.129-139
• /
• 2024

In digital marketing, the strategic use of emojis in social media advertising, particularly on the Xiaohongshu app, significantly influences consumer acceptance and purchase behavior. This study examines the impact of emoji-laden advertisements and the role of brand metaphorical warmth on consumer perceptions. Employing a tailored questionnaire, the research explores how emojis affect brand advertisement reception, filling a gap in empirical research on emoji advertising effectiveness. Findings indicate that emojis, when used judiciously, enhance consumer acceptance and contribute to a positive brand perception. However, excessive use may undermine trust. Brand metaphorical warmth emerges as a crucial factor, suggesting that emojis can effectively convey warmth, fostering a deeper emotional connection with consumers. These insights offer practical implications for refining social media marketing strategies, advocating for a balanced approach to emoji usage in advertisements to optimize engagement and influence consumer behavior.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.302-305
• /
• 2007

In recent years, many researches on new storage media with high capacity and information are developing. For manufacture of optical storage with high capacity, the injection molding process is generally used. In order to increase the filling ratio of the injection molding structure, the injection molding process required for high injection pressure, packing pressure and temperature control of the mold. However, conventional injection molding process is difficult to increase the filling ratio using injection master with the range of several nanometers and high aspect ratio. In order to improve and increase filling ratio of nano-structure with high aspect ratio, the active temperature control of injection mold was used. Experimental conditions were used injection pressure, time and temperature. Consequently, by using the peltier device into injection mold, we carried out the efficient and active temperature control of mold at low cost.