• Membrane Journal
• /
• v.28 no.2
• /
• pp.121-128
• /
• 2018

Terpolymers, which are chemical compounds composed of three different chemical compounds, have rarely been utilized for gas separation membranes. In this study, we demonstrate a simple process to fabricate a composite membrane for $CO_2/N_2$ separation based on a terpolymer synthesized from poly(2-[3-(2H-benzotriazol-2-yl)-4-hydroxyphenyl] ethylmethacrylate)(PBEM), poly(oxyethylene methacrylate)(POEM), and methyl methacrylate (MMA) via free radical polymerization. A solution of the as-synthesized PBEM-PMMA-POEM was coated onto a microporous polysulfone (PSf) support to form a composite membrane. The successful polymerization and the characteristics and morphology of the membrane were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) analysis, thermogravimetric analysis (TGA), and field emission scanning electron microscopy (FE-SEM). The gas permeance and $CO_2/N_2$ selectivity of the PBEM-PMMA-POEM terpolymer membrane were measured at $25^{\circ}C$. A maximum $CO_2/N_2$ selectivity of 30.2 was obtained at a $CO_2$ permeance of 57.4 GPU ($1GPU=10^{-6}cm^3$(STP)/($s\;cm^2\;cmHg$)).

• Applied Microscopy
• /
• v.39 no.2
• /
• pp.157-165
• /
• 2009

Here we demonstrate the fine structural characteristics of the spigots on the cribellum and its peculiar sieve-like structure at the aspects of the functional significance. The surface of the cribellum is covered by hundred of tiny spigots which producing numerous cribellate silk fibrils. It has been known that the cribellar silk is considered as a quite different sort of catching silk with dry-adhesive properties. By our fine structural observation using the field emission scanning electron microscopy (FESEM), the titanoecid spiders have a specialized sieve-like plate just in front of the anterior spinnerets. The other types of the silk spigots were identified as follows: ampullate, pyriform and aciniform glands. Two pairs of major ampullate glands send secretory ductules to the anterior spinnerets, and another 1~2 pairs of minor ampullate glands supply the median spinnerets. In addition, the pyriform glands send ductules to the anterior spinnerets, and the aciniform glands feed silk into the median and the posterior spinnerets, respectively. Characteristically, 2 distinct types (A & B types) of the aciniform spigots were identified in this spider, and the spigots of the aciniform B type are always detected at the posterior spinneret, however sexual dimorphism for spigot is unlikely to be exhibited in this species of spider.

• Applied Microscopy
• /
• v.39 no.2
• /
• pp.141-147
• /
• 2009

The antennae of millipedes have a prominent function in detecting various types of environmental stimuli, and structural modification of the antennae is closely associated with the degree of sense recognition. Although the biological significance of the antennal sensillae to millipedes are widely understood, the structure and function of the antennal sensillae are still not clear and more precise analysis is required. We have analysed the ultrastructural characteristics of the antennal sensillae in a millipede Anaulaciulus koreanus koreanus using field emission scanning electron microscopy (FESEM). According to their morphological and substructural features, we could identify three different types of antennal sensillae as follows: trichoid sensilla (TS), chaetiform sensilla (CS) and basiconic sensilla (BS). The TS on the articles are long, blunt-tipped, almost straight hairs with deep longitudinal grooves in their lower parts whereas, the CS are long, sickleshaped bristles with longitudinal grooves acuminating toward the tip. The BS can be subdivided further into three subtypes which are the large-sized basiconic sensilla ($BS_1$), the small-sized basiconic sensillae ($BS_2$) and the spiniform basiconic sensillae ($BS_3$). The BS between the terminal segment and distal margins of the other segments are clearly discriminated in this species.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3740-3747
• /
• 2009

To protect the citizens' health of Gyeongju and to secure basic data for the assessment of health and environmental risk, distribution characteristics of meteorological elements were investigated and numerical simulation of wind field using RAMS model was carried out. In addition, measurement and analysis of air pollutants, forecasting the behavior air pollutants using ISC-AEROMOD view, and health and environmental risk-influenced zones were defined through managing air polluting materials to prevent health damage and property damage. According to the survey results of air pollution in Gyeongju and surroundings, average annual concentration of air pollutants in Gyeongju was slightly lower than that in Pohang and Ulsan areas, but concentration of particulate matters and nitrogen dioxide at Gyeongju Station Square and Yonggang Crossing were sometimes higher than that in Pohang and Ulsan areas. Results of the modeling of moving and diffusion of air pollutants that affect citizens' health showed that parts of the 1st through 4th industrial complexes together with POSCO were included in particulate matters and sulfur dioxide influenced areas in Pohang Steel Complex area, and that Haedo-dong, Sangdae-dong, Jecheol-dong and Jangheung-dong in Pohangnam-gu represented locally worsened air quality due to a quantity of air pollutant emission from dense steel industries and large scale industrial facilities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.537-543
• /
• 2019

Alumina(Al₂O₃) is a ceramic material used in industry with a range of particle sizes and characteristics. In this study, a boehmite sol was prepared by a hydrolysis and peptizing process using the Sol-Gel method from aluminum isopropoxide (AIP). γ-Al₂O₃ was prepared by drying and calcining. To prevent particle agglomeration during the manufacturing process, four kinds of polyvinyl alcohol (PVA) with molecular weights of 9,000~10,000, 31,000~50,000, 89,000~98,000, and 130,000 were added and three concentrations of HNO₃ (0.1, 0.3, 0.5 molar ratio) were added to determine their effects on the particles. The crystal structure, composition, particle size and shape of the prepared γ-Al₂O₃ were confirmed through x-ray diffraction (XRD), x-ray fluorescence analyzer (XRF), particle size analyzer (PSA), and field emission scanning electron microscopy (FE-SEM). As a result, γ-Al₂O₃ with a purity of approximately 98.2% was synthesized, and the particle size decreased and the uniformity increased with increasing ratio of HNO₃ addition and PVA molecular weight. From these results, the particle size can be controlled during the manufacturing process of γ-Al₂O₃ by controlling the addition ratio of PVA and HNO₃.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.4
• /
• pp.147-152
• /
• 2011

ZnO nanorods fabricated on a Zn substrate pre-coated with ZnO as a seed layer by the hydrothermal method were studied mainly as a function of ZnO precursor concentration. Characteristic features by using field-emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD) were investigated to define the changed micro-structure and crystalline phase of the ZnO nanorods according to the experimental conditions. The nanorod morphology strongly depended on the precursor concentration. For example, ZnO nanorods vertically aligned with a hexagonal (002) oriented structure with a diameter of 600~700 nm and length of $6.75{\mu}m$ were clearly observed at the highest concentration of 0.015 M. The strong hexagonal structure was believed to be associated with the highest photoluminescene (PL) intensity and a promising voltage value of ca. 6.069 V at $1000{\mu}A$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.9
• /
• pp.1284-1288
• /
• 2009

Identification of various inorganic compound crystals contained in solar salts, which are produced from 12 areas of Jeonnam, was firstly made by the X-ray diffraction (XRD) technique. The analysis of the XRD spectra was carried out on the basis of Joint Committee on Powder Diffraction Standards (JCPDS) data and the results of Energy Dispersive X-ray Spectrometer (EDX) measurements. In particular, the analysis of the XRD spectra supported that each solar salt contains $Na_2S$ (Shinan Jeungdo and Sinui), $KMgCl_3$ (Shinan Bigeum), $Ca(ClO_3)_2$ (Shinan Docho), $CaAl_4O_7$ (Haenam Songji), $CaSiO_3$ and $CaCl_2$ (Goheung) as inorganic compound crystals, which have not been reported for the solar salts. Also, the XRD results indicated that the solar salts maintain a cubic NaCl crystal structure without any change of lattice parameters etc. However, it was shown in the Field Emission Scanning Electron Microscope (FE-SEM) images that an external form of the solar salts has a lamination layer shape of a cubic structure, which is different from a simple cubic form for the purified salts and the reagent NaCl.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.9
• /
• pp.611-615
• /
• 2001

Y$_2$O$_3$ thin films have been proposed as a buffering insulator of metal/ferroelectric/insulator/semiconductor field effect transistor(MFISFET)-type ferroelectric random access memory (FRAM). In this study, $Y_2$O$_3$ thin films were etched with inductively coupled plasma(ICP). The etch rates of $Y_2$O$_3$ and YMnO$_3$, and the selectivity of $Y_2$O$_3$ to YMnO$_3$ were investigated by varying Cl$_2$/(Cl$_2$＋Ar) gas mixing ratio. The maximum etch rate of $Y_2$O$_3$, and the selectivity of $Y_2$O$_3$ to YMnO$_3$ were 302$\AA$/min, and 2.4 at Cl$_2$/(Cl$_2$＋Ar) gas mixing ratio of 0.2 respectively. Optical emission spectroscopy(OES) was used to understand the effects of gas combination on the etch rate of $Y_2$O$_3$ thin film. The surface reaction of the etched $Y_2$O$_3$ thin films was investigated by x-ray photoelectron spectroscopy (XPS). XPS analysis confirmed that there was chemical reaction between Y and Cl. This result was confirmed by secondary ion mass spectroscopy(SIMS) analysis.

• Applied Microscopy
• /
• v.37 no.4
• /
• pp.231-238
• /
• 2007

Although the biological significance of the antennal sensillae to millipedes are widely understood, the structure and function of the antennal sensillae are still not clear and more precise analysis is required. Thus, this study initiate to reveal the fine structural characteristics of various sensory receptors on the antennae of millipede Oxidus gracilis were observed with field emission scanning electron microscopy(FESEM). The antennae generally include eight segments, called articles. On the surface of the antennae, there are a variety of sensory receptors which include olfactory and mechanical receptors. We could identify four different types of antennal sensillae in O. gracilis as follows: apical cone sensilla, trichoid sensilla, chatiform sensilla and basiconic sensilla. The most prominent is four large spital cone sensillae on distal tip of the 8th article. Both of trichoid and chaetiform sensillae are abundantly observed at the most of antennal articles. These sharply pointed structures are inclined and slightly curved toward the apex of the sensilla. The basiconic sensilla are further divided into three subtypes: large basiconic sensilla($Bs_1$), small basiconic sensilla($Bs_2$) and spiniform sensilla($Bs_3$). The $Bs_1$ is located at the 5th and 6th articles, while the $Bs_2\;and\;Bs_3 can be seen at the 5th and 7th articles, respectively.

• Tribology and Lubricants
• /
• v.34 no.3
• /
• pp.84-92
• /
• 2018

Bearings are essential for reducing vibration and wear, in order to achieve high durability and increase longevity. White metal treatment of tilting pads via centrifugal casting method has the possibility of increasing durability. However, this manufacturing method has drawbacks such as long processing time, high defect rate, and harmful health effects. Laser cladding deposition technique is a powerful method that can address these issues by decreasing the processing time and providing good adhesion. In this study, we suggest optimum conditions for laser cladding deposition that can be used in industrial applications. We deposited a soft white metal layer on SCM440 that is primarily used in shafts to minimize wear of bearing pads. During the laser deposition process, we controlled factors such as laser power, powder feed rate, and laser head speed to determine the optimum conditions. In addition, we measured the hardness using micro Vickers, and performed field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, and friction tests to investigate the mechanical properties and surface characteristics for different parameters. Based on the experimental results, we suggest that laser power, powder feed rate, and laser head speed of 1.3 kW, 2.5 rpm, and 10 mm/s, respectively, constitute the optimum conditions for producing white metals using laser cladding.