• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.5
• /
• pp.285-295
• /
• 1999

Electroluminescent(EL) devices based on organic materials have been of great interest due to their possible applications for large-area flat-panel displays. They are attractive because of their capability of multi-color emission, and low operation voltage. An approach to realize such device characteristics is to use active layers of lanthanide complexes with their inherent extremely sharp emission bands in stead of commonly known organic dyes. In general, organic molecular compounds show emission due to their $\pi$-$\pi*$ transitions resulting in luminescence bandwidths of about 80 to 100nm. Spin statistic estimations lead to an internal quantum efficiency of dye-based EL devices limited to 25%. On the contrary, the fluorescence of lanthanide complexes is based on an intramolecular energy transfer from the triplet of the organic ligand to the 4f energy states of the ion. Therefore, theoretical internal quantum efficiency is principally not limited. In this study, Powders of TPD, $Eu(TTA)_3(phen) and AlQ_3$ in a boat were subsequently heated to their sublimation temperatures to obtain the growth rates of 0.2~0.3nm/s. Organic electrolumnescent devices(OELD) with a structure of $glass substrate/ITO/Eu(TTA)_3(phen)/AI, glass substrate/ITO/TPD/Eu(TTA)_3(phen)/AI and glass substrate/ITO/TPD/Eu(TTA)_3(phen)/AIQ_3AI$ structures were fabricated by vacuum evaporation method, where aromatic diamine(TPD) was used as a hole transporting material, $Eu(TTA)_3(phen)$ as an emitting material, and Tris(8-hydroxyquinoline)Aluminum$(AlQ_3)$ as an electron transporting layer. Electroluminescent(EL) and current density-voltage(J-V) characteristics of these OELDs with various thickness of $Eu(TTA)_3(phen)$ layer were investigated. The triple-layer structure devices show the red EL spectrum at the wavelength of 613nm, which is almost the same as the photoluminescent(PL) spectrum of $Eu(TTA)_3(phen)$.It was found from the J-V characteristics of these devices that the current density is not dependent on the applied field, but on the electric field.

• Korean Journal of Materials Research
• /
• v.15 no.3
• /
• pp.209-215
• /
• 2005

Titanium dioxide films $(TiO_2)$ doped cobalt transition metal were prepared on titanium metal by water spray pyrolysis technique. Micro-morphology, crystalline structure, chemical composition and binding state of sample groups were evaluated using field emission scanning microscope(FE-SEM), X-ray diffractometer(XRD), Raman spectrometer, X-ray photoelectron spectrometer(XPS). $TiO_2$ films of rutile structure were predominately formed on all sample groups and $Ti_2O_3$ oxide was coexisted on the surface of cobalt doped-sample groups. The optical absorption peaks measured by using UV-VIS-NIR spectrophotometer were observed at specific wavelength region in sample groups doped cobalt ion. This result could be analyzed by introducing crystal field theory.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1834-1836
• /
• 1997

In this study, we simulated the developing process of two-dimensional corona discharge using the fluid method in 760 torr. It was assumed that the transport coefficients of nitrogen gas were only the function of local electric field. Discharge mechanisms considered were a Townsend first ionization and a secondary electron emission. We obtained spatio-temporal distribution of electron and ion by calculating continuity equation using FCT algorithm and calculated an electric field distribution considering a space charge.

• Journal of the Korean Society of Visualization
• /
• v.19 no.1
• /
• pp.36-42
• /
• 2021

This study measured the velocity of magnetic particles inside the power generation using external heat sources. Single Plane Illumination Microscopy (SPIM) was used to measure magnetic particles that are simultaneously affected by bubbly flow and magnetic field. It has the advantage of reducing errors due to particle superposition by illuminating the thin light sheet. The hydraulic diameter of the power generation is 3mm. Its surface is covered with a coil with a diameter of 0.3 mm. The average diameter of a magnetic particle is 200nm. The excitation and emission wavelengths are 530 and 650nm, respectively. In order to find out the flow characteristics, a total of four velocity fields were calculated in wide and narrow gap air bubbles, between the wall and the air bubble and just below the air bubble. Magnetic particles showed up to 8.59% velocity reduction in the wide gap between air bubbles due to external magnetic field.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1450-1452
• /
• 1996

In order to optimize the characteristics of gate insulator for FED(field emission device), we investigated the effect of wet-etching process on the gate insulator for fabrication of FED. We used the general three types of etchants for fabrication of the metal tip FEA(field emitter array), they are MO and oxide etchants to form the gate hole, and Al etchant to remove the release layer. In the result of the breakdown field of the insulator by the measure of the current-voltage characteristics, the breakdown field of insulator for immersing in oxide etchant was rapidly lowering with increasing etching time, but that for immersing in Al etchant was slow lowering. Also, in comparing cleaning with non-cleaning samples, the breakdown field of the cleaning samples was higher than that of non-cleaning samples.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.2
• /
• pp.27-37
• /
• 1997

Photoluminescent and cathodoluminescent charcteristics of inorganic luminescent materials were investigated ot develop possible phosphors for thin film electroluminescent (TFEL) device applications. Mg, Zn, and Photoluminescent and cathodoluminescent charcteristics of inorganic luminescent materials were investigated ot develop possible phosphors for thin film electroluminescent (TFEL) device applications. Mg, Zn, and $Si_3N_4$ powders were used to synthesize $(Mg_xZn_{1-x})SiN_2$ host materials. $Tb_4O_7$ and $Eu_2O_3$ powdrs were added as luminescent centers. Very sharp emission spectra of $Tb^{3+}$ ions were observed from $Mg._5Zn._5SiN_2:Tb$ sampels sintered at $1400^{\circ}C$ for an hour and the maximum intensity of emission spectra occured at wavelength of 550nm (green light). Synthetic conditions of $(Mg_xZn_{1-x})SiN_2:Eu$ phosphors were optimized for the hghest luminescence. The Eu concentrations were varied from 0.2% to 1.6%. Before firing, the powders were mixed using ballmills, methanol, acetone, or D.I. water. The Mg/Zn ratio also were varied from x=0.3 to x=0.7. The maximum PL intensity was obtained from a sample with 1.2% Eu concentration and the powder was mixed with methanol and dried before firing. The maximum intensity of the emission spectra occurred t the wavelength of 470nm(blue light). TFEL devices fabricated by using sputter deposition of $(Mg._3Zn._7)SiN_2:Eu$ phosphor layer showed yellowish white emission at the phosphor field of 2MV/cm.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.E1
• /
• pp.1-11
• /
• 2008

Mercury (Hg), which is mainly emitted from coal-fired power plants, remains one of the most toxic compounds to both humans and ecosystems. Hg pollution is not a local or regional issue, but a global issue. Hg compounds emitted from anthropogenic sources such as coal-fired power plants, incinerators, and boilers, can be transported over long distances. Since the last decade, many European countries, Canada, and especially the United States, have focused on technology to control Hg emissions. Korea has also recently showed an interest in managing Hg pollution from various combustion sources. Previous studies indicate that coal-fired power plants are one of the major sources of Hg in Korea. However, lack of Hg emission data and feasible emission controls have been major obstacles in Hg study. In order to achieve effective Hg control, understanding the characteristics of current Hg sampling methods and control technologies is essential. There is no one proven technology that fits all Hg emission sources, because Hg emission and control efficiency depend on fuel type, configuration of air pollution control devices, flue gas composition, among others. Therefore, a broad knowledge of Hg sampling and control technologies is necessary to select the most suitable method for each Hg-emitting source. In this paper, various Hg sampling methods, including wet chemistry, dry sorbents trap, field, and laboratory demonstrated control technologies, and international regulations, are introduced, with a focus on coal-fired power plants.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.3
• /
• pp.316-323
• /
• 2013

This paper deals with the near-field to far-field calculation for far-field characteristics of antenna and electromagnetic compatibility(EMC) testing. Since the conventional EMC testing process is inefficient such as measurements of the wide band signals and mega structures, Stratton-Chu formula is used to predict the far-field emission by simple and direct process. The usefulness of Stratton-Chu formula is verified by comparing to the analytic solution of the uniform distribution aperture in free-space. In order to inspect the far-fields and to get the near-field values, full-wave simulation solver is utilized. Through the full-wave simulation about the patch antenna, calculated far-field results from Stratton-Chu formula are proven. The predicted magnitudes of the far-field are in error by less than 6 %.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1440-1441
• /
• 1995

We fabricated diode-type silicon field emitter array device and tested the current-voltage characteristics. Silicon oxide layer having the thickness of $1{\mu}m$ is grown in the (100) oriented n-type silicon substrates. Oxide layer is patterned by the mask with $10{\mu}m$ diameter circles. Silicon substrate is then etched using NAF 1 solution to form the sharp tip arrays as an electron source. In the UHV test station, we tested the current-voltage characteristics for the samples. Turn-on voltage was about 140V and maximum emission current was $310{\mu}A$ at 164V. We studied about silicon bonding process for future work, too.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.151-154
• /
• 2008

Information on the area and spatial distribution of crop fields is needed for biomass production, arrangement of water resources, trace gas emission estimates, and food security. The present study aims to monitor crops status during the growing season by estimating its aboveground biomass and leaf area index (LAI) from field reflectance taken with a hand-held radiometer. Field reflectance values were collected over specific spectral bandwidths using a handheld radiometer(LI-1800). A methodology is described to use spectral reflectance as indicators of the vegetative status in crop cultures. Two vegetation indices were derived from these spectral measurements. In this paper, first we analyze each spectral reflectance characteristics of vegetation in the order of growth stage. Vegetation indices (NDVI, GNDVI) were calculated from crop reflectance. And assess the nature of relationships between LAI and VI, as measured by the in situ NDVI and GNDVI. Among the two VI, NDVI showed predictive ability across a wider range of LAI than did GNDVI. Specific objectives were to determine the relative accuracy of these two vegetation indices for predicting LAI. The results of this study indicated that the NDVI and GNDVI could potentially be applied to monitor crop agriculture on a timely and frequent basis.