• The Journal of Engineering Geology
• /
• v.29 no.1
• /
• pp.51-68
• /
• 2019

This study performs to evaluate adaptability of seashore filtering type seawater-intake which adapts dua1 filter well alternative for direct seawater-intake. This study varies filter condition of seashore free surface aquifer which is composed of sand layer then installs real size dual filter well and single filter well to evaluate water permeability and proper pumping amount according to filter condition. According to result of step aquifer test, it is analysed that 110.3% synergy effect of water permeability coefficient is happened compare to single filter since dual filter well has better improvement. dual filter has higher water permeability coefficient compare to same pumping amount, this means dual filter has more improved water permeability than single filter. According to analysis result of continuous aquifer test, it is evaluated that dual filter well (SD1200) has higher water permeability than single filter well (SS800) by analysis of water permeability coefficient using monitoring well and gauging well, it is also analysed dual filter has 110.7% synergy effect of water permeability coefficient. As a evaluation result of pumping amount according to analysis of water level dropping rate, it is analysed that dual filter well increased 122.8% pumping amount compare to single filter well when water level dropping is 2.0 m. As a result of calculating proper pumping amount using water level dropping rate, it is analysed that dual filter well shows 136.0% higher pumping amount compare to single filter well. It is evaluated that proper pumping amount has 122.8~160% improvement compare to single filter, pumping amount improvement rate is 139.6% compare to averaged single filter. In other words, about 40% water intake efficiency can be improved by just installation of dual filter compare to normal well. Proper pumping amount of dual filter well using inflection point is 2843.3 L/min and it is evaluated that daily seawater intake amount is about $4,100m^3/day$ (${\fallingdotseq}4094.3m^3/day$) in one hole of dual filter well. Since it is possible to intake plenty of water in one hole, higher adaptability is anticipated. In case of intaking seawater using dual filter well, no worries regarding damages on facilities caused by natural disaster such as severe weather or typhoon, improvement of pollution is anticipated due to seashore sand layer acts like filter. Therefore, It can be alternative of environmental issue for existing seawater intake technique, can save maintenance expenses related to installation fee or damages and has excellent adaptability in economic aspect. The result of this study will be utilized as a basic data of site demonstration test for adaptation of riverside filtered water of upcoming dual filter well and this study is also anticipated to present standard of well design and construction related to riverside filter and seashore filter technique.

• The Journal of Korean Society for Radiation Therapy
• /
• v.24 no.1
• /
• pp.23-30
• /
• 2012

Purpose: There was a problem with using MU verification programs for the reasons that there were errors of MU when using MU verification programs based on Pencil Beam Convolution (PBC) Algorithm with radiation treatment plans around lung using Analytical Anisotropic Algorithm (AAA). On this study, we studied the methods that can verify the calculated treatment plans using AAA. Materials and Methods: Using Eclipse treatment planning system (Version 8.9, Varian, USA), for each 57 fields of 7 cases of Lung Stereotactic Body Radiation Therapy (SBRT), we have calculated using PBC and AAA with dose calculation algorithm. By developing MU of established plans, we compared and analyzed with MU of manual calculation programs. We have analyzed relationship between errors and 4 variables such as field size, lung path distance of radiation, Tumor path distance of radiation, effective depth that can affect on errors created from PBC algorithm and AAA using commonly used programs. Results: Errors of PBC algorithm have showned $0.2{\pm}1.0%$ and errors of AAA have showned $3.5{\pm}2.8%$. Moreover, as a result of analyzing 4 variables that can affect on errors, relationship in errors between lung path distance and MU, connection coefficient 0.648 (P=0.000) has been increased and we could calculate MU correction factor that is A.E=L.P 0.00903+0.02048 and as a result of replying for manual calculation program, errors of $3.5{\pm}2.8%$ before the application has been decreased within $0.4{\pm}2.0%$. Conclusion: On this study, we have learned that errors from manual calculation program have been increased as lung path distance of radiation increases and we could verified MU of AAA with a simple method that is called MU correction factor.

• Child Health Nursing Research
• /
• v.5 no.1
• /
• pp.38-47
• /
• 1999

This study is the study on health promoting behaviors of 6th grade students according to sex. The purpose of this study is to find the difference in the value of health in their lives among 6/sup th/ grade students according to sex, to examine the differences in practicing health promoting behaviors, and to determine the correlation between the practice of health promoting behaviors and the characteristics of these students. The subjects of this study were 177 6/sup th/ grade students who were randomly selected from two elementary schools in Taegu City. The tools used to measure health promoting behaviors were the measuring utility for practicing health promoting behaviors developed by Kyung-Suk Ki (1983) and the utility for the values of health in lives developed by Wallston, Maides and Wallston and translated by Gin Yoon (1989). The data collected were analyzed with t-test, Pearson correlation coefficient, and descriptive statistics using SPSS program. The results of the present study were as follows : 1) According to the results of the value placed in health in their lives, the number of students who placed health high in their lives was 69 boys (75%) and 64 girls (75.3%). 2) According to the results obtained from comparing the degree of practicing health promoting behaviors according to sex, in the field of personal hygiene and daily habits, the girls showed a higher degree of practice with 3.26±0.33 and the boys, 3.05±0.45(t=-3.484, p=0.001) : and in the field of contagious diseases, the girls scored significantly higher with 3.40±0.39 than the boys with 2.99±0.54(t=-2.363, p=0.019). In the filed of preventing accidents, the girls showed a meaning high significant result with 3.16±0.46 than the boys with 2.99±0.54(t=-2.362, p=0.019). When the results from the total questions in the field of health promoting behaviors were compared, the girls showed a meaningfully high correlation with 3.19±0.28 than the boys with 3.07±0.36(t=-2.601, p=0.010). Thus, the results showed that the girls, compares with the boys, practice more behaviors of personal hygiene & daily habits, prevention of communicable diseases, and prevention of accidents. 3) According to the results of the relationship between the subjects’ characteristics and their health promoting behaviors according to set in the case of the boys, they showed a meaningful positive correlation with health promoting behaviors and the current status of health (r=0.266, p=0.005). Thus, for the boys, as their health status was better, the more health promoting behaviors they showed. In the case of the girls, the meaningful variables had a correlation with the health promoting behaviors were the number of extra-curricula activities(r=0.182, p=0.047) and the birth order(r=-0.192, p=0. 024). In overall regardless of sex, the health status (r=0.188, p=0.006) and birth order(r=-0.149, p=0.024) showed a meaningful correlation with practicing health promoting behaviors. With the above results, we suggest the following proposals. 1) In elementary children of lower and upper classmen as applied with the current school age, developing a utility to measure health promoting behaviors is needed since the physical, emotional and intellectual development of these children exist. 2) According to the results of this study, developing a program for health promotion is needed in 6/sup th/ grade students.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.4
• /
• pp.297-306
• /
• 2019

Soil moisture monitoring is an important task to cope with climate change, and soil water prediction can provide large-scale soil moisture information. Therefore, this study was conducted to evaluate the relationship between the measured and predicted soil water content, and to estimate the correlation between the soil characteristics and soil water content. The selected sites in soil moisture monitoring network were 76, and the soil with high sand content (sand, loamy sand, and sandy loam in soil texture) accounted for 77% of the total. Organic matter and bulk density were 0.03 to 3.50% and 1.01 to 1.69 Mg m^-3, respectively. Predicting values of field capacity and wilting point were lower than the measured soil water content, and the correlation coefficient between the measured and predicted values were low as 0.548 to 0.748. However, a significantly high positive correlation (p<0.01) found between the measured and predicted soil water content. Soil water (field water capacity and wilting point) content was highly positively correlated with silt, clay, and organic matter (p<0.01) and highly negatively correlated with sand (p<0.01).

• Journal of Soil and Groundwater Environment
• /
• v.6 no.3
• /
• pp.53-59
• /
• 2001

There is a lot of method to manage the insanitary landfill but vertical cutoff walls have been widespreadly used and were installed into the subsurface to act as a barrier to horizontal groundwater flow, The stabilized material such as specialized cement or mixed soil with additives has been generally applied for the materials of the deep soil mixing barrier in korea. The amount of the stabilized material is dependent on the field conditions, because the mixing ratio of the material and the field soil should achieve a requirement in the coefficient of permeability, lower than 1.0$\times$$10^{7}$cm/sec. This study determined the quantity and optimized function ratio of the stabilized material in the formation process of the mixed barrier that was added with stabilized material on the field soil classified into SW-SC under USCS (Unified Soil Classification System). After that the fly ash and lime were selected as an additives an that could improve the function of the stabilized material and then the method to improve the functional progress in the usage of putting into the stabilized material as an appropriate ratio was studied and reviewed. The author used the flexible-wall permeameter for measuring the permeability and unconfined compressive strength tester for compressive strength, and in the view of environmental engineering the absorption test of heavy metals and leaching test regulated by Korean Waste Management Act were performed. As the results, the suitable mixing ratio of the stabilized material in the deep soil mixing barrier was determined as 13 percent. To make workability easy, the ratio of stabilized material and water was proven to be 1 : 1.5. With the results, the range of the portion of the additives(fly ash : lime= 70 : 30) was proven to be 20-40% for improving the function of the stabilized material, lowering of permeability. In heavy metal absorption assessment of the mixing barrier system with the additives, the result of heavy metal absorption was proved to be almost same with the case of the original stabilized material; high removal efficiency of heavy metals. In addition, the leaching concentration of heavy metals from the leaching test for the environmental hazard assessment showed lower than the regulated criteria.

• Korean Journal of Remote Sensing
• /
• v.33 no.5_1
• /
• pp.559-570
• /
• 2017

A partial least squares regression (PLSR) model was developed to map the internal soluble solids content (SSC) of apples using a ground-based hyperspectral scanner that could simultaneously acquire outdoor data and capture images of large quantities of apples. We evaluated the applicability of various preprocessing techniques to construct an optimal prediction model and calculated the optimal band through a variable importance in projection (VIP)score. From the 515 bands of hyperspectral images extracted at wavelengths of 360-1019 nm, 70 reflectance spectra of apples were extracted, and the SSC ($^{\circ}Brix$) was measured using a digital photometer. The optimal prediction model wasselected considering the root-mean-square error of cross-validation (RMSECV), root-mean-square error of prediction (RMSEP) and coefficient of determination of prediction $r_p^2$. As a result, multiplicative scatter correction (MSC)-based preprocessing methods were better than others. For example, when a combination of MSC and standard normal variate (SNV) was used, RMSECV and RMSEP were the lowest at 0.8551 and 0.8561 and $r_c^2$ and $r_p^2$ were the highest at 0.8533 and 0.6546; wavelength ranges of 360-380, 546-690, 760, 915, 931-939, 942, 953, 971, 978, 981, 988, and 992-1019 nm were most influential for SSC determination. The PLSR model with the spectral value of the corresponding region confirmed that the RMSEP decreased to 0.6841 and $r_p^2$ increased to 0.7795 as compared to the values of the entire wavelength band. In this study, we confirmed the feasibility of using a hyperspectral scanner image obtained from outdoors for the SSC measurement of apples. These results indicate that the application of field data and sensors could possibly expand in the future.

• Progress in Medical Physics
• /
• v.9 no.3
• /
• pp.137-141
• /
• 1998

The purposes of this report are to evaluate whether lead ball and steel ball could be used as protective material of radiation and to acquire physical data of them for protecting 4-10 MV X-ray beams. Lead balls of diameter 2.0～2.5mm or steel balls of diameter 1.5～2.0 mm were filled in an acrylic box of uniform width. An MV radiograph of metal balls in a box were taken to ascertain uniformity of ball distribution in the box. Average density of metal ball and linear attenuation coefficient of metal balls for 4～10 MV X -rays were measured. At the time of measurement of linear attenuation coefficient, Farmer ionization chamber was used and to minimize the scatter effect, distance between the ball and the ionization chamber was 70 cm and field size was 5.5cm${\times}$5.5cm. For comparison, same parameters of lead and steel plates were measured. The distribution of metal balls was uniform in the box. The density of a mixture of lead-air was 6.93g/cm$^3$, 0.611 times density of lead, and the density of a mixture of steel-air was 4.75g/cm$^3$, 0.604 times density of steel. Half-value layers of a mixture of lead-air were 1.89 cm for 4 MV X-ray, 2.07 cm for 6 MV X-ray and 2.16 cm for 10 MV X-ray, and approximately 1.64 times of HVL of lead plate. Half-value layers of a mixture of steel-air were 3.24 cm for 4 MV X-ray, 3.70 cm for 6 MV X-ray and 4.15 cm for 10 MV X-ray, and approximately 1.65 times of HVL of lead plate. Metal balls can be used because they could be distributed evenly. Average densities of mixtures of lead-air and steel-air were 6.93g/cm$^3$, 4.75g/cm$^3$ respectively and approximately 1.65 times of densities of lead and steel. Product of density and HVL for a mixture of metal-air are same as the metal.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.4
• /
• pp.339-346
• /
• 1999

This experiment was carried out to determine harvest date and cultivar effects on the agronomic characteristics, forage yield, and quality of fall sown oat (Avena sativa L.) at the forage experimental field, College of Agriculture and Life Sciences, Seoul National University, Suweon from August to November 1993. The experiment was arranged in a split plot design with three replications. The main plots were consisted of the harvesting dates, suchas early (11 October), mid(21 October), and late(1 November), the subplots were consisted of different maturities of oat cultivars, such as 'West', 'Cayuse' and 'Magnum'. The first heading date of an early maturing culivar, West, was observed on 10 October, and the heading increased up to 30% at the late harvesting date. The average dry matter (DM) content of oat cultivars increased significantly from 12.8 to 15.9% as the growing stage progressed(p<0.01). The average dry matter percentage of West, Cayuse, and Magnum was 15.4, 13.4, and 13.5%, respectively. The crude protein (CP) content of oat cultivars decreased significantly from 20.1 to 13.3% as the harvesting date was delayed(p<0.01), and the CP contents of midseason and late maturing cultivars, Cayuse and Magnum, respectively, were significantly higher than that of an early maturing cultivar West (p<0.01). The mid harvesting date showed the highest acid detergent fiber(ADF) and neutral detergent fiber (NDF) contents than the other harvesting dates, and an early maturing cultivar West had higher ADF and NDF contents than the midseason and late maturing cultivars, Cayuse and Magnum, respectively. The in vitro dry matter digestibility(IVDMD) of oat cultivar West decreased as the harvesting date was delayed, but that of Cayuse and Magnum decreased only by the mid harvesting date. Cayuse and Magnum showed 3~4% higher digestibility than West. The correlation coefficient between IVDMD and ADF content was -0.86. The average dry matter yield of oat cultivars increased from 2,901 to 5,901kg/ha as the harvesting date was delayed(p<0.01), but no significant difference was found among oat cultivars. The corrdelation coefficient between DM yield and gorwing degree days(GDD) was +0.86. The results of this study indicate that a delay in harvesting date would be recommendable for the increase of dry matter yield when fall-sown oat is grown. Especially, the DM yield of the midseason and late maturing cultivars, Cayuse and Magnum, respectively, can be increased without much change of forage quality although the harvesting date are delayed.

• Journal of radiological science and technology
• /
• v.32 no.1
• /
• pp.101-106
• /
• 2009

Purpose of this study is to compare the signal intensity (SI) and CNR with T1 weighted image using FLASH at 3T abdominal MRI by varying flip angle (FA). Totally 20 patients (male : 12, female : 8, Age : $28{\sim}63$ years with mean : 51) were examined by 3 Tesla MR scanner (Magnetom Tim Trio, SIEMENS, Germany) with 8 channel body array coil between september and October 2008. Imaging parameters were as follows : FLASH sequence, TR : 120 ms, TE : minimum, FOV (field of view) : $360{\times}300\;mm$, Matrix : $256{\times}224$, slice : 6 mm, scan time : 15 sec and Breath-hold technique. Abdominal image, with a 50 ml syringe filled with water placed in the FOV measuring the water signal, were acquired with varying FA through $10^{\circ}$ to $90^{\circ}$ with $10^{\circ}$ interval. SI's were measured three times at liver parenchyme, water, spleen and background and averaged. The CNR's were measured between the ROIs (region of interest). Statistic analysis was performed with ANOVA test using SPSS software (version 17.0). Less than FA $30^{\circ}$, abdominal images were severely inhomogeneity. Especially, T1 effect of water signal was weak. As the flip angle increased, the signal intensity decreased at all the regions. Especially, flip angle of the highest signal intensity was observed with $40^{\circ}$ at the liver parenchyme, $20^{\circ}$ at water, $30^{\circ}$ at the spleen, respectively. The CNR between liver and water was -60.92 at FA $10^{\circ}$ and 15.16 at FA $80^{\circ}$. The CNR between liver and spleen was -3.18 at FA $10^{\circ}$ and 9.65 at $80^{\circ}$. In conclusion, FA $80^{\circ}$ is optimal for T1 weighted effect using FLASH pulse sequence at 3.0 T abdominal MRI.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.451-464
• /
• 2008

Three-phase inverse fluidized bed has been widely adopted with its increasing demand in the fields of bioreactor, fermentation process, wastewater treatment process, absorption and adsorption processes, where the fluidized or suspended particles are small or lower density comparing with that of continuous liquid phase, since the particles are frequently substrate, contacting medium or catalyst carrier. However, there has been little attention on the three-phase inverse fluidized beds even on the hydrodynamics. Needless to say, the information on the hydrodynamics and transport phenomena such as heat and mass transfer in the inverse fluidized beds has been essential for the operation, design and scale-up of various reactors and processes which are employing the three-phase inverse beds. In the present article, thus, the information on the three-phase inverse fluidized beds has been summarized and reorganized to suggest a pre-requisite knowledge for the field work in a sense of engineering point of view. The article is composed of three parts; hydrodynamics, heat and mass transfer characteristics of three-phase inverse fluidized beds. Effects of operating variables on the phase holdup, bubble properties and particle fluctuating frequency and dispersion were discussed in the section of hydrodynamics; effects of operating variables on the heat transfer coefficient and on the heat transfer model were discussed in the section of heat transfer characteristics ; and in the section of mass transfer characteristics, effects of operating variables on the liquid axial dispersion and volumetric liquid phase mass transfer coefficient were examined. In each section, correlations to predict the hydrodynamic characteristics such as minimum fluidization velocity, phase holdup, bubble properties and particle fluctuating frequency and dispersion and heat and mass transfer coefficients were suggested. And finally suggestions have been made for the future study for the application of three-phase inverse fluidized bed in several available fields to meet the increasing demands of this system.