Isothermal physical aging of a glass fiber/epoxy composite was examined at different aging temperatures ($T_a$) and degrees of conversion (monitored by the glass transition temperature, $T_g$) by means of the TBA torsion pendulum technique. The range of aging temperature was from 10 to $130^{\circ}C$ : the conversion was systematically changed from $T_g$=$76^{\circ}C$ to $T_g$=$177^{\circ}C$ (fully crosslinked). The effect of isothermal physical aging was manifested as perturbations of the modulus and mechanical loss vs. temperature in the vicinity of $T_a$ for all conversions. The rate of isothermal physical aging determined from the change of modulus with aging time at fixed aging temperature decreased and then increased with increasing conversion below T$_{a}$=9$0^{\circ}C$. There exists a superposition in aging rate vs. ($T_g$ -$T_a$) by shifting horizontally and vertically. This implies that the physical aging process is independent of the change of chemical structure as conversion proceeds. It has been found that water absorbed at the aging temperature below $70^{\circ}C$ during isothermal physical aging lowers the apparent aging rate. It is due to the absorbed water molecules forming strong polar interactions with hydroxyl group on network chain and reducing the segmental mobility during the physical aging.g.
With the development of cardiac surgical technique, we need more prosthetic materials for repairing the intra- and extracardiac defects. Although bovine pericardial bioprosthesis treated with glutaraldehyde (GA) solution is one of the most popular materials, it has a drawback of later calcific degeneration. The purpose of this study is to investigate the effectiveness of several materials and methods in reducing the calcific degeneration of bovine pericardium. Material and Method: Forty square-shaped pieces of bovine pericardia were fixed in 0.625% GA solution with 4 g/L MgCl$_2$ㆍ6$H_2O$ as a control group (group 1). Other 40 pieces pre-treated with 1 % SDS(group 2) and 40 pieces post-treated with 8% glutamate (group 3) and 2% chitosan (group 4) were also fixed in the same GA solution. Other 40 pieces pre-treated with 1% SDS and post-treated with 8% glutamate and 40 pieces post-treated with 2% chitosan were also fixed in the same GA solution (group 5, 6). The pericardial pieces were implanted into the belly of 40 Fisher 344 rats subdermally and were extracted 1 month, 2 months, 3 months, and 6 months after the implantation. With an atomic absorption spectrophotometry, we measured the calcium amount deposited and examined the tissue with microscope. Result: The calcium deposition in 1 month was less in group 2, 5, 6 than that in group 1 (p<0.05). It was most prominent in group 5 (p<0.01). This finding continued in 2 month. In 3 month, the calcium deposition was less in group 3 and 4 as well as group 2, 5, and 6 than in group 1. In 6 month, the calcium deposition in group 2, 3, 4, 5, and 6 was less than that in group 1 and the difference was more than that of 1, 2, and 6 month. The microscopic calcium deposition was also less in group 2 and 5. Calcium deposition developed in the whole layer of pericardium, beginning with the surrounding the collagen fiber and progressing inwardly. Conclusion: Pre-treatment with SDS, post-treatment with glutamate or chitosan, and SDS pre-treatment and post-treatment with glutamate or chitosan were effective in reducing the calcium deposition in bovine pericardium. Moreover, the combined method of SDS pre-treatment and glutamate post-treatment was more effective than other methods.
The Journal of Korean Institute of Communications and Information Sciences
/
v.30
no.10A
/
pp.912-921
/
2005
Optical burst switching(OBS) is a promising solution for building terabit optical routers and realizing If over WDM. Channel scheduling Algorithm for reduce contention is one of the major challenges in OBS. We address the issue of how to provide basic burst channel scheduling in optical burst switched WDM networks with fiber delay lines(FDLs). In OBS networks the control and payload components or a burst are sent separately with a time gap. If CHP arrives to burst switch node, because using scheduling algorithm for data burst, reservation resources such as wavelength and transmit data burst without O/E/O conversion, because contention and void between burst are happened at channel scheduling process for data burst that happened the link utilization and bust drop probability Existent proposed methods are become much research to solve these problems. Propose channel scheduling algorithm that use Release Time of bust to emphasize clearance between data and data dissipation that is happened in data assignment in this treatise and maximize bust drop probability and the resources use rate (RTUC : Release Time Unscheduled Channel). As simulation results, Confirmed that is more superior in terms of data drop and link utilization than scheduling algorithm that is proposed existing. As simulation results, confirmed improved performance than scheduling algorithm that is proposed existing in terms of survival of burst, efficiency resource and delay. However, In case load were less, degradation confirmed than existent scheduling algorithm relatively, and confirmed that is superior in data drop aspect in case of load increased.
Journal of the Earthquake Engineering Society of Korea
/
v.11
no.2
s.54
/
pp.95-104
/
2007
Three types of high-rise RC building structures having irregularity in the lower two stories were selected as prototypes and were performed nonlinear static analysis by using OpenSees to verify the analysis technique and to investigate the seismic capacity of those buildings. The first one has a symmetrical moment resisting frame (Model 1), the second has an infilled shear wall in the central frame (Model 2), and the third has an infilled shear wall only in one of exterior frames (Model 3). Fiber model, which consists of concrete and reinforcing bar represented from stress-strain relationship, is adapted used for simulate the nonlinearity of members, and MVLEM(Multi vertical linear element model) is used for simulate the behavior of wall. The analytical results are simulate the behavior of piloti stories well, for example, the stiffness and yield farce of piloti stories, the up-lift of wall and the variation of lateral stiffness of column due to the variation of axial forces. Overstrength of Model 2 and Model 3 are about 2 times larger than that of Model 1. The reason of the high oversttrength and ductility of Model 2 and Model 3 is that the conservative design of Model 2 and Model 3, whose beam and column sections are the same as those of Model 1. The ductilities of Model 1 and Model 3 are slightly larger than that of Model 1 and Model 3. Model 1 and Model 3 reached mechanism condition, whereas Model 2 failed to the shear failure of shear wall and the large axial forces in columns due to large overturning moment.
Journal of the Korean Society for Nondestructive Testing
/
v.16
no.4
/
pp.225-233
/
1997
This study is performed to establish a non-destructive evaluation method for metal matrix composite using ultrasonic technique. The specimen is made of SiC/AC8A metal matrix composite by squeeze-casting method. Three kinds or reinforced particles are prepared as 4.86, 8.09 and $11.44{\mu}m$ to investigate the effect of size on the mechanical and ultrasonic properties of metal matrix composite. In addition, four different volume fractions (14, 22.5, 27.5, 35%) of reinforced particles are prepared per each size to examine the effect of volume fraction on the ultrasonic properties. From this specimen, the availability and precision of measurement of Young's modulus are examined and the evaluation method for microstructure of metar matrix composite using the speed of sound and attenuation factor is also reviewed. The results show that the Young's modulus measured by ultrasonic method is as effective as that measured by mechanical method. It is also known that the size and volume fraction of reinforced fiber are precisely evaluated using the speed of sound and attenuation factor.
The objective was to evaluate the effect of fodder tree species (FTS) with condensed tannin contents: Cordia elaeagnoides, Platymiscium lasiocarpum, Vitex mollis, and Haematoxylon brasiletto, on in vitro methane ($CH_4$) production at 24 h post incubation. The analysis was performed using the in vitro gas production technique, with three levels of inclusion/species: 600, 800, and 1,000 mg and with 4 replicates/species/level of inclusion. The substrate was incubated at $39^{\circ}C$, and the gas and $CH_4$ production were recorded at 4, 8, 12, and 24 h post incubation. The data collected was analyzed through Pearson correlation, polinomial regression and fixed effects models. There were negative correlations between FTS-total gas volume (r = -0.40; p<0.001); FTS-volume of $CH_4$ produced (r = -0.40; p<0.001) and between the inclusion level-volume of $CH_4$ produced (r = -0.20; p<0.001). As well as a positive correlation between hours post incubation-total gas volume (r = 0.42; p<0.001) and between hours post incubation-volume of $CH_4$ produced (r = 0.48; p<0.001). The FTS: C. elaeagnoides, V. mollis, and H. brasiletto have potential, in the three inclusion levels analyzed, to reduce $CH_4$ emission on in vitro trials (>32.7%), taking into account the total $CH_4$ production at 24 h of the forage used as reference (Avena sativa). It's suggested that C. elaeagnoides-according to its crude protein, neutral detergent fiber, and condensed tannins content- is the best alternative within the FTS analyzed, for feeding ruminants and for the control of $CH_4$ emissions during the dry season.
This study aimed to assess the total sugar intake for Korean and to identify major food sources contributing to those food components. Korean adults aged over 20 years old from the Korean National Health and Nutrition Examination Survey (KNHANES) 2001 and 2002 were selected. The data were analyzed to obtain nationally and seasonally representative information on the health and nutritional status of the Korean. Forty food groups were used in identifying food sources of total sugar and energy intake. Total sugar contents of foods in the KNHANES data sets were estimated by food code matching technique with Release 18 of the USDA National Nutrient Database for Standard Reference. Sample weighted means, standard errors, and population percentages were calculated using SAS and SUDAAN. The mean total sugar intake of the Korean was 60.3g in 2001, 40.9g in spring 2002, 45.7g in summer 2002, and 52.1g in fall 2002, which were 30-44% of intake of US people. Fresh fruit was identified as the most significant food source for total sugar intake in Korean population in all age groups and all seasons. The next major food sources following fresh fruits were candy/jelly/syrup/honey, coffee/coffee caream, vegetables, Kimchi, soft drinks, milk, fruit juice, cookie/cracker/cake, and vegetable juice/grain juice, which showed similar results through the seasons. While carbonated soft drink was the most significant food sources for total sugar or added sugar intakes for US people. The total sugar intakes were significantly higher in women, higher educational level, and residing in metropolitan area. As intake of total sugar increased, intakes of protein, fiber, calcium, phosphorus, iron, Vit A, B1, B2, C, niacin showed significantly increased, while high intakes of added sugars showed low intakes of some micronutrients in the US people. Percentages of people who consumed nutrients below EAR were less in higher total sugar intake group than in lower intake group. From these results, we can conclude that the food consumption habits including the total sugar intake of Korean people seems relatively good so far. More reliable database of total sugar and added sugar composition tables in public domain should be established in the future, and also more researches about total sugar and added sugar for Koreans should be continued.
Kim, M.S.;Sung, H.G.;Kim, H.J.;Lee, Sang-S.;Chang, J.S.;Ha, J.K.
Journal of Animal Science and Technology
/
v.47
no.4
/
pp.615-624
/
2005
The cPCR technique was used to monitor rumen fermentation and attachment of Fibrobacter succinogenes to cellulose at different pH in the in vitro culture medium. The target fragments of 16S rDNA(445 bp) were amplified from genomic DNA of F. succinogenes with specific primers and internal controls(205 bp) were constructed. Cell counts were estimated from the amounts of genomic DNA, which was calculated from cPCR results. F. succinogenes in pH 6.8 and 6.2 showed apparently higher attachment than in pH 5.8 during all incubation time. There were some difference between pH 6.8 and 6.2 in the degree of attachment, but the different was not significant (P>0.05). Cellulose degradation increased in process of incubation time and the increasing rate was higher when initial pH was higher. The pH in culture medium decreased regardless of initial pH in course of incubation time. After 24 h of incubation, medium pH was dropped by 0.24, 0.58 and 0.16 units from original medium pH 6.8, 6.2 and 5.8, respectively. More gas was produced at higher initial pH in the same manner as in cellulose degradation. In summery, Initial pH of rumen culture in vitro significantly influenced cellulose digestion, gas production, pH change and bacterial attachment. Especially, low pH(5.8) resulted in much lower bacterial attachment and fiber digestion compared to higher medium pH.
Proceedings of the Korea Society of Poultry Science Conference
/
2001.11a
/
pp.24-39
/
2001
These experiments were conducted to evaluate the nutritional and feeding value of red pepper seed oil meal (RPSOM) as local vegetable protein ingredients for poultry feeding. In the first experiment, nutritional values of RPSOM were evaluated by analyzing chemical compositions and determining true metabolizable energy (TME), nitrogen corrected TME (TMEn) and true available amino acid (TAAA) contents. According to the chemical analysis, RPSOM contained 22.50% of crude protein, 4.75% of ether extract, 27.70% of crude fiber, 0.34 mg/g of capsaicin and 49.97 ppm of xanthophylls. The values of TME and TMEn determined by force-feeding 16 roosters (ISA-Brown) were 1.73 kcal/g and 1.63 kcal/g on dry matter basis, respectively. The average TAAA value of 16 amino acids measured by the force-feeding technique was 81.70%. These values were used for formulating experimental diets containing various levels of RPSOM for broiler chicks and laying hens. Two feeding trials were made to investigate the effects of dietary incorporation of RPSOM into chicken feed performances of broiler chicks and laying hens. In the broiler feeding (Exp. 2), a total of two hundred twenty-five, 4 wk old male broiler chicks (Ross) were randomly divided into 9 groups of 25 birds each and assigned to three experimental diets containing 0, 5 and 10% RPSOM. The birds were fed ad libitum the diets for 3 wk and feed intake, weight gain and feed conversion rate were determined. At the end of the feeding, the blood levels of glutamate oxaloacetate transaminase (GOT), gamma glutamyl transpeptidase (GGT), blood urea nitrogen (BUN) and cholesterol, and the body and fatty acid compositions of leg muscle were measured. No significant differences were observed in weight gain, feed intake, feed conversion rate, body composition, serum levels of GOT, GGT and BUN among the treatments. However, blood cholesterol level was lower (P<0.05) in 10% RPSOM diet group than those in the other. The dietary RPSOM at 5 and 10% levels increased the content of linoleic acid (P<0.05) in leg muscle compared to that of control group. The results indicate that RPSOM can be used for broiler feed up to 10% without any significant negative effects on broiler performance. In the layer feeding (Exp. 3), the effects of dietary RPSOM on the performances of laying hen were investigated by feeding ninety 45 wk old laying hens (ISA-Brown) with experimental diets containing 0, 5 and 10% RPSOM for 4 wk (30 birds per treatment). Measurements were made on egg production rate, egg weight, feed intake, Haugh unit, egg shell strength which was higher (P<0.05) in layers fed 10% RPSOM diet compared to those fed 0 and 5% RPSOM diets. Thus, it can be concluded that RPSOM can be included into laying hen feed up to 10% without any harmful effects.
BACKGROUND: Globally, mulberry (Morus sp.) is exploited for feeding leaf to silkworms in order to obtain silk fiber or for animal feedstock production. Also, mulberry fruit is known to a by-product that was produced from mulberry tree after harvesting leaves for silkworm rearing, as a yield and consumption of mulberry fruit was increased, it has been fixing to a newincome crop. Mulberry leaves and fruits are used for the health benefits of human beings. Mulberry contains various bioactive components, such as alkaloids and flavonoids. Mulberry flavonoids are an important part of the diet because of their effects on human nutrition. The flavonoids in mulberry leaf and fruit of 'Suhyang'(Morus alba L.) were determined. METHODS AND RESULTS: Flavonoids for mulberry leaf and fruit of 'Suhyang' were analysed using ultrahigh performance liquid chromatography coupled with diode array detection and quadrupole time-of-flight mass spectrometry (UPLC-DAD-QTOF/MS)technique. An UPLC-DAD-QTOF/MS system was used, and identification of mulberry leaves constituents was carried out on the basis of the complementary information obtained from LC spectra, MS ions, and MS/MS fragments. The mulberry leaf (16 flavonoids) and fruit (9 flavonoids) were isolated and analyzed from Suhyang using UPLC-DAD-QTOF/MS chromatogram. To the best of our knowledge, Quercetin 3-O-(6"-O-malonyl) glucoside and quercetin 3-O-rutinoside (rutin) was detected on the highest content in leaf and fruit, respectively and further research will be devoted to evaluate their biological activity. CONCLUSION: Obtaining information about the concentration of functional materials in mulberry leaves could contribute to the development and promotion of processed, functional products and offer possible industrial use of 'Suhyang', holding promises to enhance the overall profitability of sericulture.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.