• Composites Research
• /
• 제19권6호
• /
• pp.16-22
• /
• 2006

다양한 조건 하에서 최상의 관통 특성을 발휘하기 위한 최적 조건에 대해 연구하였다. 섬유 종횡비(AR: 섬유 길이/섬유 직경), 계면 조건 그리고 섬유 함유량을 관통 저항력과 마찰력에 지대한 영향을 미치는 변수들로 고려하였다. 단섬유 강화고무의 관통 저항력은 기지에 비해 최대 3.4배 증가하였다. 동일한 섬유 종횡비와 섬유 함유량에서 계면 조건이 우수할수록 더 높은 관통 저항력을 보였다. 기지와 섬유 종횡비가 155이하인 일부 단섬유 강화고무의 마찰력은 존재치 않았다. 우수한 계면과 높은 섬유 종횡비를 갖는 단섬유 강화고무의 마찰력은 기지의 관통 저항력보다도 더 높았다. 전체적으로 계면 조건과 섬유 종횡비 그리고 섬유 함유량이 단섬유 강화고무의 관통 특성에 지대한 영향이 미침을 확인하였다.

• Fibers and Polymers
• /
• 제5권2호
• /
• pp.134-138
• /
• 2004

Dyeing properties of a series of 4-amino-4'-fluorosulfonylazobenzene disperse dyes on poly(ethylene terephthalate) (PET) were investigated. Build-up properties and color properties on PET were examined. In particular, the 4-aminoazobenzene dyes containing a nitro group instead of a fluorosulfonyl group at 4'-position were also synthesized in order to compare their dyeing properties on PET with that of 4'-fluorosulfonyl analogues.

• 한국농공학회논문집
• /
• 제55권4호
• /
• pp.65-72
• /
• 2013

The physical, mechanical, water purification and temperature properties of fiber reinforced porous hwang-toh green roof concrete have been evaluated in this study. The effect of the depending on replacement ratio of blast furnace slag to cement was investigated such that the replacement ratio is varied to 0 % and 30 %. Also, the replacement ratios of hwang-toh were 0, 20 and 30 %. The polyvinyl alcohol fiber was used for the reinforcing fiber. A series of pH test, unit weight, void ratio, compressive strength, after purification and variation of temperature test have been performed to evaluate the performance, water purification effect and temperature properties of the fiber reinforced porous hwang-toh green roof concrete. The test results indicate that the physical and mechanical properties of fiber reinforced porous hwang-toh green roof concrete is affected by the replacement ratio of the blast furnace slag and hwang-toh contents. Results of purifying water showed that the water purification effect of porous hwang-toh green roof concrete is about 40 %. Also, the temperature properties test results indicate the green roof blocks using fiber reinforced porous hwang-toh green roof concrete have insulation and temperature reduction effect.

• Composites Research
• /
• 제23권3호
• /
• pp.37-42
• /
• 2010

섬유 방향 강성과 강도는 복합재 압력 용기의 성능과 밀접한 관계를 갖기 때문에, 압력 용기 구조 설계시에 다른 물성들보다 중요 설계 인자가 된다. 즉 복합재 압력 용기의 내압 변형 및 파열 압력은 섬유 물성에 의해 큰 영향을 받는다. 그러므로 정확한 섬유 방향 물성을 측정할 수 있는 기법을 확립하는 것이 복합재 압력 용기 설계 전에 우선되어야 한다. 그러나 복합재 압력용기의 섬유 방향 물성은 제작 공정 변수(와인딩 장비, 작업자, 작업환경 등)와 크기 효과에 의해 큰 영향을 받으므로 기존의 시편 시험 방법으로는 정확한 섬유 방향 물성 측정이 어렵다. 섬유 물성을 측정하는 가장 이상적인 시험 방법은 실물 압력용기 파괴시험이지만 많은 비용이 소요되어, 제품으로부터 다량의 링 시편을 채취, 내압 시험을 할 수 있는 Hoop ring 시험 방법이 제시되었다. Hoop ring 시험과 실물 압력용기의 수압 파괴 시험으로부터 구한 섬유 방향 물성들은 근접된 좋은 일치를 나타내었다.

• 한국축산식품학회지
• /
• 제31권4호
• /
• pp.521-529
• /
• 2011

We evaluated the effects of dietary fiber extracted from brown rice on the quality of reduced-fat emulsion sausage. Reduced-fat emulsion sausage was supplemented with brown rice fiber at levels of 0, 1, 2, 3, and 6%. Adding different levels of brown rice fiber affected the proximate composition of the reduced-fat emulsion sausages (p<0.05), except for protein content. Adding different levels of brown rice fiber influenced the physicochemical properties of the reduced-fat emulsion sausages. The cooking yield, emulsion stability, textural properties, and viscosity of the reduced-fat emulsion sausages containing brown rice fiber improved with increases in added brown rice fiber (p<0.05). The reduced-fat emulsion sausages containing 1-3% brown rice fiber generated sensory evaluation scores similar to those of the high-fat sausage control. These results indicate that reduced-fat emulsion sausages with 1-3% added brown rice fiber had the most acceptable sensory properties and highest quality characteristics compared to the others.

• 대한기계학회논문집A
• /
• 제25권4호
• /
• pp.564-573
• /
• 2001

The mechanical properties of short carbon/glass fiber reinforced polypropylene are experimentally measured as functions of fiber content and nozzle diameter. Also, these properties are compared with the survival rate of reinforced fibers and fiber volume fraction using image analysis after pyrolytic decomposition. The survival rate of fiber aspect ratio as well as fiber volume fraction is influenced by injection processing condition, the used materials and mold conditions such as diameter of nozzle, etc. In this study, the survival rate of fiber aspect ratio is investigated by nozzle size variations in injection/mold sides. It is found that the survival rate of glass fiber is higher that the survival rate of glass fiber is higher than that of carbon fiber. Both tensile modulus and strength of short-fiber reinforced polypropylene are improved s the fiber volume fraction and nozzle diameter are increased.

• 한국건축시공학회지
• /
• 제2권3호
• /
• pp.131-138
• /
• 2002

The objective of the study is to examine the characteristic correlations between reinforcing carbon fiber and interfacial adhesion agent since the interfacial adhesion strength between reinforcing carbon fiber and matrices is believed to be an essential element influencing the physical properties in carbon fiber reinforced cement composite using slurry method. The integrity of interfacial adhesion between reinforcing fiber and cement not only affects the quality of fiber reinforced cement composite but also influences to a large degree the physical properties of the cement composite when producing carbon fiber reinforced cement composite using slurry method. Having analyzed the physical properties 1.e., water content, tensile strength, flexural strength and flexural toughness of carbon fiber reinforced cement composite specimens, C-PAM(cation polyacrylamide) was determined to be an optimum interfacial adhesion agent. The study has also demonstrated that interfacial adhesion strength varies largely on the content and type of the reinforcing fiber. Judging from magnified view of the tensile shear cross-section using VMS(video microscope system), interfacial adhesion strength between reinforcing fiber and matrices is affected by the type of interfacial adhesion agent. According to the result of the experiments, C-PAM was determined to be an ideal interfacial adhesion agent when using carbon fiber in producing carbon fiber reinforced cement composite with the optimum content of carbon fiber being established.

• 한국안전학회지
• /
• 제19권4호
• /
• pp.25-30
• /
• 2004

Unidirectional fiber-metal matrix composites have superior mechanical properties along the longitudinal direction. However, the applicability of continuous fiber reinforced MMCs is somewhat limited due to their relatively poor transverse properties. Therefore, the transverse properties of MMCs are significantly influenced by the properties of the fiber/matrix interface. In this study, the interfacial stress states of transversely loaded unidirectional fiber reinforced metal matrix composites investigated by using elastic-plastic finite element analysis. Different fiber volume fractions $(5-60\%)$ were studied numerically. The interface was treated as thin layer (with different properties) with a finite thickness between the fiber and the matrix. The fiber is modeled as transversely isotropic linear-elastic, and the matrix as isotropic elastic-plastic material. The analyses were based on a two-dimensional generalized plane strain model of a cross-section of an unidirectional composite by the ANSYS finite element analysis code.

• 펄프종이기술
• /
• 제30권1호
• /
• pp.7-17
• /
• 1998

With the advent of CLSM in the end of 1980s, it has been applied to the field of pulp and paper science in various ways. This study showed the potentials of CLSM In analyzing a change of pulp fiber and paper properties before and after mechanical treatment. In particular, a quantification of internal fibrillation has been done using cross-sectional images of fibers and image analysis technique, then evaluated the effects of fiber wall delamination on fiber and paper properties. It showed that the delaminated fibers were closely associated to development of the interfiber bonding in a fiber network. The CLSM made it possible to investigate a density profile along the sheet thickness, which was created by some papermaking processes like pressing, drying and calendering. Through the attempt to observe the forming procedure of a fiber network during handsheet making, the CLSM images showed that the pressing stage was considered greatly to contribute to generation of interfiber bonding with removing a free water and partly a bound water between fibers. In addition, the CLSM could be used to illustrate not only a surface profile of paper showing the extent of smoothness or roughness, but also a density profile in a B-direction of the network. Finally it became evident that the CLSM could be used as an excellent tool to predict development in fiber and paper properties before and after mechanical treatment during papermaking processes.

• 폴리머
• /
• 제32권1호
• /
• pp.7-12
• /
• 2008

폴리(에틸렌 테레프탈레이트) (PET) 섬유는 폴리프로필렌(PP)에 비해 높은 기계적 물성과 용융온도를 갖고있어 폴리프로필렌의 기계적 물성을 향상시키기 위한 섬유강화재료로 사용이 가능함을 확인하였다. 그러나 PP와 PET 섬유는 상용성이 부족하여 복합재료의 기계적 물성이 저하되었으며 PET 섬유의 구조적인 특성상 PP-g-MAH를 첨가하여도 효과가 부족하였다. 이러한 문제점을 해결하기 위해 NaOH 수용액으로 PET 섬유의 표면처리를 하여 PET 섬유의 표면에 친수성기를 도입하였으며 상용화제로서 PP-g-MAH를 첨가하여 기계적 물성이 우수한 PP/PET 섬유 복합재료를 제조하고 SEM과 IR의 결과와 물성의 거동을 상호 관련지었다.