• 펄프종이기술
• /
• 제32권2호
• /
• pp.51-57
• /
• 2000

Cylinder machine usually gives more fiber orientation than fourdrinier and has limitation in machine speed because of fiber wash-off caused by centrifugal force when machine speed increases. This study aimed for the improvement of paper formation and productivity by setting an apron in vat inlet and by adjusting mould water head. Improvement of formation and increase of machine speed were achieved, which ultimately improve productivity. Installing an apron successfully decreased fiber wash-off. Fiber orientation and two-sideness of ash distribution became less severe. The proper adjustment of water head inside the cylinder mould proved to be an important factor not only in paper formation but also in decreasing paper two-sideness.

• Wind and Structures
• /
• 제16권6호
• /
• pp.541-560
• /
• 2013

The aim of the paper is to use optimization and advanced numerical computation of a sail fiber-reinforced composite model to increase the performance of a yacht under wind action. Designing a composite-shell system against the wind is a very complex problem, which only in the last two decades has been approached by advanced modeling, optimization and computer fluid dynamics (CFDs) based methods. A sail is a tensile structure hoisted on the rig of a yacht, inflated by wind pressure. Our objective is the multiple criteria optimization of a sail, the engine of a yacht, in order to obtain the maximum thrust force for a given load distribution. We will compute the best possible yarn thickness orientation and distribution in order to minimize the total fiber volume with some displacement constraints and in order to leave the most uniform stress distribution over the whole structure. In this paper our attention will be focused on computer simulation, modeling and optimization of a sail-shape mathematical model in different regatta and wind conditions, with the purpose of improving maneuverability and speed made good.

• Macromolecular Research
• /
• 제12권6호
• /
• pp.564-572
• /
• 2004

Modem applications could benefit from multifunctional materials having anisotropic optical, electrical, thermal, or mechanical properties, especially when coupled with locally controlled distribution of the directional response. Such materials are difficult to engineer by conventional methods, but the electric field-aided technology presented herein is able to locally tailor electroactive composites. Applying an electric field to a polymer in its liquid state allows the orientation of chain- or fiber-like inclusions or phases from what was originally an isotropic material. Such composites can be formed from liquid solutions, melts, or mixtures of pre-polymers and cross-linking agents. Upon curing, a 'created composite' results; it consists of these 'pseudofibers' embedded in a matrix. One can also create oriented composites from embedded spheres, flakes, or fiber-like shapes in a liquid plastic. Orientation of the externally applied electric field defines the orientation of the field-aided self-assembled composites. The strength and duration of exposure of the electric field control the degree of anisotropy created. Results of electromechanical testing of these modified materials, which are relevant to sensing and actuation applications, are presented. The materials' micro/nanostructures were analyzed using microscopy and X-ray diffraction techniques.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.529-530
• /
• 2009

이 논문에서는 ECC를 압출성형 방식으로 제조하기 위한 배합, 제조과정, 그리고 양생방법을 제시하고, 배합에 따른 휨 성능과 섬유 분포 특성 평가를 수행하였다. 실험결과 배합에 따라 섬유 분포특성이 달라지며, 이러한 섬유 분포 특성에 따라 휨거동에 차이가 발생하는 것을 확인하였다.

• 비파괴검사학회지
• /
• 제13권1호
• /
• pp.7-14
• /
• 1993

In order to analyze the stress distribution and stress concentration factors in composite materials, especially, in the short fiber of the reinforced composite materials by photoelastic method, it is necessary to develop the photoelastic model material having short fibers with arbitrary size and orientation. In this paper, the orthotropic photoelastic model material having short fibers for the transparent type photoelastic device was developed by the embedded corrosion fiber method. It was found that the model material was satisfactory to the properties of photoelastic model material, and also that the embedded corrosion fiber method can be employed for developing a model material with arbitrary size and direction to analyze the stress distribution and crack problems of composite materials.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2000년도 춘계학술발표논문집
• /
• pp.55-55
• /
• 2000

환망초지기는 장망초지기와 달리 섬유배향성이 심할 뿐만 아니라, 초지속도를 높일 경우 실린더 회전에 따라 생긴 원심력으로 인하여 지필 파괴(wash-off)가 발생하기 때문에 속도에 제한을 받게 된다. 본 연구는 이런 점을 개선하기 위하여 forming zone과 탈수시간이 중요한 인자임을 인식하고 vat 인입부에 apron을 설치하고 mould head의 변화를 통하여 종이의 품질향상과 생산성 향상을 도모하고자 하였다. 그 결과 wash-off 의 감소로 인하여 퍼짐새(formation)의 향상은 물론 생산속도을 증가시킬 수 있어 생산성 향상을 도모할 수 있었다. 섬유 배향성 개선으로 인한 CD의 치수안정성 도모, 종이의 양면성 감소로 인한 컬 발생을 방지 할 수 있으며, 내부수위의 적절한 변경은 종이의 퍼짐새는 물론 종이구조 개선의 중요한 인자로 확인되었다.

• 대한기계학회논문집
• /
• 제18권9호
• /
• pp.2396-2403
• /
• 1994

An experimental study on material characterization and mechanical properties of SMC(Sheet Molding Compounds) compression method parts was carried out. Simple compression test using grease oil as a lubricant was carried out to characterize flow stress of SMC at elevated temperatures. Two different mold temperatures, $130^{\circ}C{\;}and{\;}150^{\circ}C$ and two different mold speeds, 15, 45 mm/min were used for preparing the specimen of SMC compression molded parts. Surface roughness, tensile, and 3-point bending tests were used to determine the effects of molding temperatures and speeds on mechanical properties of compression molded SMC parts. Orientation and distribution of glass fiber in the compression molded SMC parts were also investigated by photographing the burnt flat specimen and taking SEM(Scanning Electron Microscope) of cross-sectional T-specimen.

• 한국잠사곤충학회지
• /
• 제38권2호
• /
• pp.180-185
• /
• 1996

가잠 실크 피브로인의 아미노산 조성 중 가장 많은 비율을 차지하고 있는 Glycine에 동위체 라벨링([1-13C]-Gly)을 실시하여 5령 1일째부터 고치를 지을 때까지의 생합성의 상태를 NMR법을 이용하여 추적하였다. 그 결과 5령 5일을 기준으로 가잠 실크의 결정부분을 형성하는 아미노산이 형성은 되나 실크의 결정부분을 형성하는 아미노산이 형성은 되나 실크가 되었을 때 결정성의 고배향 구조를 이루지 못하고 결정성의 저배향 구조를 형성하고마는 형태로 된다고 생각되어 졌다. 이 사실은 배향시료의 고체CP-NMR 스펙트럼의 피크 분리로부터 확인할 수 있었다. 그 결과 수소결합에 관여하는 N-H의 방향이 거의 수직이라고 할 수 있는 83˚의 분자축 부분이 18˚의 고배향 분포를 이루면서 82% 존재하고, 또 나는 N-H의 결합방향이 60˚인 분자축 부분이 18% 존재하면서 62˚의 배향분포를 이룬다고 하는 시뮤레이션의 결과로 설명되어졌다.

• 대한소아치과학회지
• /
• 제5권1호
• /
• pp.33-38
• /
• 1978

It has been studied that aminoacetonitrile was associated with the inhibition of collagen fiber, argyrophilic fiber and oxytalan fiber synthesis. This experiment was performed, by the basic knowledge of above mentioned study, to study on the biological effect of aminoacetonitrile to the developing periodontal ligament in Sprague Dawley rat. twenty two of female rats weighing about 200gm were gestated. In 7 days after gestation, the experimental rats were injected aminoacetonitrile 7 times intraperitoneally. After parturition, delivered fJtuses were divided into 4 groups and each group was sacrificed to 1 day, 7 days, 14 days, and 21 days after delivery, schematically. All the fetuses were observed on their periodontal ligament by histological and histo chemical methods. To study on the components of periodontal ligament fiber in these experimental study van Gieson, Masson's trichrom, argyrophilic fiber, oxytalan fiber, methyl green pyronin and periodic acid-Shiff staining were performed. Results were as follows; 1) Retardation of functional orientation in periodontal ligament collagen fiber was observed in 1 day fetuses hut this appearance was diminished gradually and recovered in normal condition in 7 days fetuses. 2) Distribution of argyrophilic fiber in 1 day fetuses was oriented delicately and loosely but volume of this fiber was gradually thickened and distributed densely. 3) Oxytalan fiber was oriented dendritic ally and contradictorily in 14 days fetuses but their orientation was changed into oblique form in middle portion of roof and their numbers were increased gradually. 4) Pyronin-philic stain of fibroblast was gradually deepened in 7 days fetuses and this finding also suggested to the depreciation of collagen synthesis in this specimen. 5) PAS positive line was observed continuousely at the portion of cervical to the middle root surface.

• 펄프종이기술
• /
• 제32권5호
• /
• pp.14-25
• /
• 2000

In this investigation, a wavelet transform analysis was used to decompose beta-radiographic formation images into spectral and spatial components. Conventional formation analysis may use spectral analysis, based on Fourier transformation or variance vs. zone size, to describe the grammage distribution of features such as flocs, streaks and mean fiber orientation. However, these methods have limited utility for the analysis of statistically stationary data sets where variance is not uniform with position, e.g. paper machine CD profiles (especially those that contain streaks). A continuous wavelet transform was used to analyze formation data arrays obtained from radiographic imaging of handsheets and cross machine paper samples. The response of the analytical method to grammage, floc size distribution, mean fiber orientation an sensitivity to feature localization were assessed. From wavelet analysis, the change in scale of grammage variation as a function of position was used to demonstrate regular and isolated differences in the formed structure.