• The Korean Journal of Mycology
• /
• v.31 no.3
• /
• pp.175-180
• /
• 2003

To develop the health/functional food materials, we investigated the cultural condition of mycelial growth on the solid state fermentation using the brown rise, Acanthopanax sp. and Artemisia sp., and also evaluated inhibitory activity of angiotensin converting enzyme (ACE) of hot water extracts from cultured media of Pleurotus eryngii. As the amount of Acanthopanax nnd Artemisia In the cultural media increased, the mycelial growth rate decreased. Especially, addition of Aeantopanax showed marked effect than Artemisia. Moisture contents in three kinds of cultured media were in the range of $10.9{\sim}12.0%$. Crude protein fat and crude fiber content were the highest value in cultured brown rice medium, whereas the mineral contents (Ca, K and P) were higher in the Acanthopanax supplemented (5%) medium than the other media, The extraction yield of the Artemisia supplemented (5%) medium was the highest value of 4.80%, and the pH of hot water extract from cultured brown rice medium showed the lowest value of 6.1. Lightness (L) values in three kinds of extracts from cultured media were in the range of $85.8{\sim}87.1$. Redness (a) value was the highest In the brown rice and Acanthopanax supplemented media, however cultured Artemisia supplemented medium showed the highest value in yellowness (b). In comparison of sugar components analyzed by the thin layer chromatography with three kinds of samples, two spots were detected to be glucose and maltose, respectively. The ACE inhibitory activity of hot water extract from the cultured Acanthopanax supplemented medium showed the highest value at the concentration of $0.2{\sim}1.0\;mg/ml$. These results suggest that the Pleurotus eryngii grew in natural media using brown rice and Acanthopanax can be supplemented to the brown rice medium to enhance its ACE inhibitory activity as health/functional food materials.

• Journal of agriculture & life science
• /
• v.43 no.1
• /
• pp.51-59
• /
• 2009

The chemical components and antimicrobial activities of garlic from different area were investigated and analyzed to provide basic data for functional food materialization and processing. Hunter's values of garlic from different area were L 53.41~57.15, a -3.49~-4.38 and b 11.47~17.55. The moisture, crude protein, crude fat, nitrogen free extract, crude fiber and ash were 65.24~71.96, 6.24~9.35, 0.21~0.49, 19.01~22.72, 0.58~0.95 and 1.01~2.01%, respectively. The major minerals of garlic from different area were Na(27.22~112.03), Mg(18.17~32.56), K(242.16~569.28), Ca(28.60~63.93), P(117.72~265.21 mg%) and major free sugars were sucrose, glucose and fructose. The major amino acids of garlic from different area were proline, arglmne, glutamic acid and aspartic acid and content of total amino acid was 2,709.33~4,561.04 mg%. The ascorbic acid content of garlic from different area was 2.966~8.673 mg%. Composition of fatty acids of garlic from different area were linoleic acid, oleic acid and palmitic acid, unsaturated fatty acid and saturated fatty acid contents were 72.18~74.35 and 25.65~27.82%, respectively. Antimicrobial activities of garlic extracts as different area increased depends on concentration and showed the high antimicrobial activities against Gram(+) and Gram(-).

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.2
• /
• pp.26-52
• /
• 1987

Among the diffuse-porous woods which arc dominant in Korea and used as construction materials due to their wood quality, ten species of six genus involving seven species of three genus in Betulaceae were studied on the radial variation of structural demenb. The species studied were Betula platyphylla var. japonica, B. ermanii, B. davurica, B. scstata, B. schmidtii, Carpinus laxifora, Alnus japonica, Prunus sargentii. Acer mono and Diospyros kaki. Wood fiber, vessel elements and ray increased rapidly in size from pith to a certain annual ring. After then the radial variation in size of the main structural elements seemed to be divided into three types; levelled off curve pattern indicating constant size(type I), continuously increasing curve pattern showing ever increase in size (type II) and parabolic curve pattern showing the gradual decrease after the maximum (type III), but the variation types by structural dements were different even in the same species. Based on the results from this study, it appears to be reasonable to consider the stabilized age of wood fiber, vessel elements and ray rather than considering wood fiber length in distinguishing mature woods from juvenile woods.

• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.2
• /
• pp.43-51
• /
• 2017

Purpose: The purpose of this study is to evaluate the dosimetric effects of couch attenuation and air gaps using 3D phantom for prone breast radiation therapy. Materials and method: A 3D printer(Builder Extreme 1000) and computed tomography (CT) images of a breast cancer patient were used to manufacture the customized breast phantom. Eclipse External Beam Planning 13.6 (Varian Medical Systems Palo Alto, CA, USA) was used to create the treatment plan with a dose of 200 cGy per fraction with 6 MV energy. The Optically Stimulated Luminescence Detector(OSLD) was used to measure the skin dose at four points (Med 1, Med 2, Lat 1, Lat 2) on the 3D phantom and ion-chamber (FC65-G) were used to perform the in-vivo dosimetry at the two points (Anterior, Posterior). The Skin dose and in-vivo dosimetry were measured with reference air gap (3 cm) and increased air gaps (1, 2, 3, 4, 5, 6 cm) from reference distance between the couch and 3D phantom. Results: As a result, measurement for the skin dose at lateral point showed a similar value within ${\pm}4%$ compared to the plan. While the air gap increased, skin dose at medial 1 was reduced. And it was also reduced over 7 % when the air gap was more than 3 cm compared to radiation therapy plan. At medial 2 it was reduced over 4 % as well. The changes of dose from variety of the air gap showed similar value within ${\pm}1%$ at posterior. As the air gap was increased, the dose at anterior was also increased and it was increased by 1 % from the air gap distance more than 3 cm. Conclusion: Dosimetrical measurement using 3D phantom is very useful to evaluate the dosimetric effects of couch attenuation and air gaps for prone breast radiation therapy. And it is possible to reduce the skin dose and increase the accuracy of the radiation dose delivery by appling the optimized air gap.

• The korean journal of orthodontics
• /
• v.33 no.2 s.97
• /
• pp.103-111
• /
• 2003

The Purpose of this study was to evaluate the effect of occlusion on the mechanical strength of periodontal fibers during retention periods after experimental tooth movement. In the Sprague-Dawley male rats weighing 200g or more, the ntraoral elastics were inserted into the both right and left interproximal space between upper first and second molars for tooth movement. kiter 4 days later, the left lower first, second, and third molars were extracted for differentiating the non-occlusal side from the occlusal side in the same mouth. At the same time the elastics were removed and then light cured resin was Placed in the space between upper first and second molars following undercut was made for retention bilaterally. From the beginning of retention, 7 rats were sacrificed at 0, 4, 8, 12, 16, 20 days respectively. For evaluating of magnitude on the mechanical strength of periodontal tissue, the maximal shear load of the upper first molars were measured bilateraly during extraction using Instron Universal Testing Machine. The results of this study were obtained as follows : 1. In the occlusal side, the maximal shear load was increased from no retention to retention 20 days group as time was going and statistically difference was shown from retention 12 days group (p<0.05). 2. In the non-occlusal side, the maximal shear load was increased slightly from no retention to 20 days group as time was going but there was no statistically difference (p>0.05). 3. The result compared with the maximal shear load between occlusal and nonocclusal side showed no statistically difference until retention 8 day group (p>0.05), but showed statistically difference from retention 12 day to 20day group (P<0.05). These results show that occlusion had an effect on mechanical strength of the periodontal fibers during retention periods after experimental tooth movement; therefore, it is suggested that occlusion should be considered while the retainer types and retention period are planned.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.4
• /
• pp.372-377
• /
• 1999

Objective of this research was to draw the basic criteria of the compost maturity evaluation, by assessing the stability of chemical and physical properties of the bark and piggery manure byproduct composts during the composting. Colors of the mature composts were black and dark brown for the bark and piggery manure by-product composts, respectively. Good earthy odor was detected for both by-product composts after approximately 40 days composting, by which odors of the original raw materials were disappeared. pH and EC of the mature bark: compost were stabilized at 6.5 and 1dS/m, respectively. The respective values for the piggery compost were stabilized at 7.2 and 6dS/m. Organic matter contents were decreased with time to be stabilized at about 60% at the end of composting. During composting, total N contents of the bark and piggery composts were maintained at $1.1{\sim}1.5%$, and $1.5{\sim}2.2%$, respectively. For both fertilizers, $NH_4-N$ contents were increased at the initial stage bur. decreased after the middle stages of decomposition, resulting in the increase of $NO_3-N$ contents. Total inorganic N contents were increased with time. C/N ratios of both mature composts were stabilized at $25{\sim}27$. CEC of the bark compost was increased logarithmically with time and that of mature compost was 87cmol(+)/㎏. CEC of the piggery manure compost was hyperbolic function with rime and reached at 70cmol(+)/㎏ at the mature stage. Crude fiber analysis indicated that relative contents of lignin were increased with composting by compensating for the decreases of cellulose and hemicellulose contents.

• Journal of Life Science
• /
• v.18 no.10
• /
• pp.1360-1368
• /
• 2008

Physicochemical characteristics and antioxidative activity were measured to investigate the possibility for functional characteristics of Pleurotus eryngii and its by-products. By-products of Pleurotus eryngii were classified with mushroom, fungal body and fermented mushroom by-product. Moisture was the highest in fermented mushroom by-product and crude protein was 1.72%, in mushroom. Crude fiber content was less than 10% except the fungal body by-product. Mineral content appeared to be the highest in the fermented mushrooom with a value of 3,696.1 mg/100 g, and potassium was a predominant mineral in Pleurotus eryngii as well as its by-products. Amino acid content was the highest in mushroom with a level of 989.59 mg/100 g. DPPH radical scavenging ability of the fermented mushroom was the highest, and its methanol extract and water extract exhibited $64.07{\pm}0.23%$ and $76.27{\pm}1.46%$ of scavenging activity at a concentration of 10 mg/ml. Reducing power was significantly higher in the fermented mushroom in comparison with those of the mushroom, mushroom by-product, and fungal body by-product. The reducing power of the water extract of fermented mushroom was the highest with a value of $2.22{\pm}0.03$. SOD-like activities for the individual samples except the fungal body by-product were higher than 50% at a concentration of 10 mg/ml. The hydroxyl radical scavenging abilities of the individual samples except the fungal body by-product were over 50%. Nitrite scavenging effects were better in pH 2.5 than in pH 4.0. While the nitrite scavenging effects of methanol extracts were $42.93{\pm}1.71{\sim}72.97{\pm}2.18%$, those of the water extracts were $57.66{\pm}1.80{\sim}81.07{\pm}0.81%$. Antioxidative activity of the fermented mushroom appeared to be the highest among the mushroom by-products. Taken together, these results provide an insight into utilization of the mushroom by-products as materials for functional foods and animal feed.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.2
• /
• pp.113-121
• /
• 2014

Objectives: This study is intended to seek credible and efficient measurements on airborne asbestos concentrations that allow immediate action by establishing complementary data through comparative analysis with existing PCM and KF-100 method real-time monitoring equipment in working areas in Seoul where asbestos-containing buildings are being demolished, including living environment surroundings. Materials: We measured airborne asbestos concentrations using PCM and KF-100 at research institutes, monitoring networks, subway stations and demolition sites of asbestos-containing buildings. Through this measurement data and KF-100 performance testing, we drew a conversion factor and applied it via KF-100. Finally we verified the relationship between PCM and KF-100 with statistical methods. Results: The airborne asbestos concentrations by PCM for the objects of study were less than the detection limit(7 fiber/$mm^2$) in three (20%) out of 15 samples. The highest concentration was 0.009 f/cc. The airborne asbestos concentrations by PCM in laboratories, monitoring networks, subway stations and demolition sites of asbestos-containing buildings were respectively $0.002{\pm}0.000$ f/cc, $0.004{\pm}0.001$ f/cc, $0.009{\pm}0.001$ f/cc, and $0.002{\pm}0.000$ f/cc. As a result of KF-100 performance testson rooftops, the conversion factor was 0.1958. Applying the conversion factor to KF-100 for laboratories, the airborne asbestos concentrations ratio of the two ways was nearly 1:1.5($R^2$=0.8852). Also,the airborne asbestos concentration ratio of the two ways was nearly 1:1($R^2$=0.9071) for monitoring networks, subway stations, and demolition sites of asbestos-containing buildings. As a result of independent sample t-tests, there was no distinction between airborne asbestos concentrations monitored in the two ways. Conclusions: In working areas where asbestos-containing buildings are being demolished, including living environment surroundings, quickly and accurately monitoring airborne asbestos scattered in the air around the working area is highly important. For this, we believea mutual interface of existing PCM and a real-time monitoring equipment method is possible.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.8
• /
• pp.449-455
• /
• 2017

Process input data including material and energy, process output data including product, co-product and its environmental emissions of the reference and target processes were collected and analyzed to evaluate the process performance. Environmentally problematic input/environmental emissions of the manufacturing processes were identified using these data. Significant process inputs contributing to each of the environmental emissions were identified using multiple regression analysis between the process inputs and environmental emissions. Optimum combination of the end-of-pipe technologies for treating the environmental emissions considering economic aspects was made using the linear programming technique. The cement manufacturing processes in Korea and the EU producing same type of cement were chosen for the case study. Environmentally problematic input/environmental emissions of the domestic cement manufacturing processes include coal, dust, and $SO_x$. Multiple regression analysis among the process inputs and environmental emissions revealed that $CO_2$ emission was influenced most by coal, followed by the input raw materials and gypsum. $SO_x$ emission was influenced by coal, and dust emission by gypsum followed by raw material. Optimization of the end-of-pipe technologies treating dust showed that a combination of 100% of the electro precipitator and 2.4% of the fiber filter gives the lowest cost. The $SO_x$ case showed that a combination of 100% of the dry addition process and 25.88% of the wet scrubber gives the lowest cost. Salient feature of this research is that it proposed a method for identifying environmentally problematic input/environmental emissions of the manufacturing processes, in particular, cement manufacturing process. Another feature is that it showed a method for selecting the optimum combination of the end-of-pipe treatment technologies.

• Journal of Life Science
• /
• v.25 no.11
• /
• pp.1265-1272
• /
• 2015

Barnyard millet Miryang 3 [Echinochloa esculenta (A. Braun)] grains have recently been acknowledged for beneficial health properties due to phenolic ingredients and dietary fiber. This study has been conducted on the anti-diabetic activity of barnyard millet Miryang 3 which shows the strongest anti-inflammatory activity among barnyard millet inhabiting in South Korea. When 80% ethanol (EtOH) extract of barnyard millet Miryang 3 grains were orally administered into db/db diabetic mice for 8 weeks (600 mg/kg/day), the glucose level in blood following fasting appeared to be improved compared to the control group. The results of glucose tolerance test and blood lipid profile assay were similar to those of the metformin-administered positive control group. In addition, the level of body weight increase (8.54±2.24) was lower than the level of metformin-administered group (10.36±3.15); however, there was no subtle difference with negative and positive control groups in terms of food efficiency rates. In addition, total cholesterol levels of the 80% EtOH extract-administered group (160.7±7.6) were significantly reduced compared to the diabetic control group (229.3±47.8) and metformin-administered group (176.0±25.6). Consequently, these results show that barnyard millet grains alleviates many of the diabetic symptoms in vivo non-insulin-dependent diabetes mellitus, and suggest that barnyard millet grains can be applicable in developing new functional food materials.