• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.337-351
• /
• 2015

The articles, published in the Journal of Korean Forest Society from Volume 1 (1962) to Volume 102 (2013), were investigated for the research trend analysis about forest plants for special purposes, i.e., edible plants, medicinal plants, feed resources, landscape plants, fiber plants, industrial usage, bee plants, bioenergy/phytoremediation uses, dye materials, and rare/endangered/endemic plants. These research articles were classified again based on the contents of research into following categories - habitat environment, ecology, physiology, propagation, silviculture (including planting and tending), genetics and breeding, identification, pest and disease control, animal-related research, components analysis and extracts, vegetation survey, biotechnology, management, recreation and forest healing, and research review. Among the total 2,433 articles published, 611 (25.1%) were related to plants for special usage or purposes. The highest frequency (14.9%) in publications was found in the field of silviculture followed by physiology, propagation, identification, and genetics and breeding, respectively. On the bases of usage, edible plants showed higher frequency (26.5%) than others, followed by industrial purpose, bioenergy/phytoremediation usage, landscape plants, medicinal plants, and rare/endangered/endemic plants. Populus plant species was the most popular in research, showing 62 articles; and Castanea crenata 36; Pinus koraiensis 35; Robinia pseudoacacia 20; Ginko biloba 17, etc. Based on the survey and analysis, the following points are suggested: 1) improved evaluation of forest plants as non-wood resources, 2) expanding research topics on the basis of production, management, and utilization of non-wood forest resources, 3) management of database of forest plant information and encouragement needed to strengthen cooperative researches satisfying the needs of other industrial and scientific areas, and 4) encouraging to promote traditional knowledge based research on forest plants.

• Applied Chemistry for Engineering
• /
• v.18 no.3
• /
• pp.205-212
• /
• 2007

In this work, polyacrylonitrile (PAN) fiber was prepared by electrospinning methods from dimethyl formamide solutions with various conditions, such as 8~20 kV applied voltage, 5~15 wt% PAN concentration, and 15 cm tip-to-collector distance (TCD). The nanofibers were stabilized by oxidation at $250^{\circ}C$ for 1 h, and then subsequently carbonized at $800{\sim}1000^{\circ}C$ for 1 h. The structured characteristics of the nanofibers before and after carbonization were studied by Fourier transform infrared spectroscopy. The resulting diameter distribution and morphologies of the nanofiber were evaluated by scanning electron microscope analysis. The electrochemical behaviors of the nanofiber were observed by cyclic voltammetry tests. From the results, the diameter of electrospinning nanofibers was predominantly influenced by the concentration of polymer solution and the applied voltage. The average diameter of the fibers was decreased with increasing the polymer concentration up to 10wt%. It was also found that the nanofibers with uniform diameter distribution and fine diameter could be achieved at 15kV input voltage and 15 cm TCD.

• Journal of Sensor Science and Technology
• /
• v.6 no.1
• /
• pp.35-42
• /
• 1997

The optical biosensor using the electrically controlled release of reactive reagent is developed for the detection of peroxide. Rapid degradation of polymer complex of PEOx and PMAA occurs as the applied current increases and thus released amount of HPA increases. The degradation velocity of polymer and the amount of HPA released are linearly proportional to the applied current. Peroxide is reacted with the released reagent by peroxidase and then the product, a fluorescent dimer DBDA, is formed. The monochromic light from light source (150W Xe arc ramp) excites the DBDA and the excited light is transmitted through an optical fiber to be detected by a photodiode array. The change of fluorescence intensity is related to the change of peroxide concentration. The peroxidase is entrapped in Ca-alginate get on the inner surface. The biosensor has the linear signal range of 0.025mM-10.mM peroxide. By applying the step function of peroxide, reproducibility of biosensor has been investigated. The mathematical model is constructed by the combination of enzyme kinetics with reactor flow model. Good agreement is obtained between the experimental result and model prediction in the sensor signal.

• Journal of Animal Science and Technology
• /
• v.45 no.6
• /
• pp.891-900
• /
• 2003

Cellular FOS(c-fos) protein is a transcription factor that forms heterodimers mostly with c-jun family and stimulates the transcription of genes containing AP-1 regulatory elements. This c-fos expression can control growth and differentiation of various precursor cells including myoblasts. The controls by c-fos gene have been identified for affecting skeletal muscle fiber traits which are the key determinants of meat quality in pigs. As a first step for identifying the relationship between c-fos gene and meat quality traits in cattle, we fully sequenced 1,443 bp of Hanwoo c-fos mRNA and analyzed expression patterns from various organs and muscle tissues. The sequence identities of Hanwoo c-fos with that of human, pig and mouse showed 89.8%, 93.3% and 87%, respectively. Analyses of the northern blot showed high c-fos expressions were obtained in spleen and rib muscle from 7 organs and 9 different parts of muscles investigated. These results presented here can be used as a valuable marker for meat quality related traits in cattle with further verification.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.1A
• /
• pp.11-18
• /
• 2012

This paper deals with the numerical determination of the stress intensity factors of cracked aluminum plates under the mixed mode of $K_I$ and $K_{II}$ in glass-epoxy fiber reinforced composites. For the stress intensity factors, two different models are reviewed such as VCCT and two-step extension method. The p-convergent partial layerwise model is adopted to determine the fracture parameters in terms of energy release rates and stress intensity factors. The p-convergent approach is based on the concept of subparametric element. In assumed displacement field, strain-displacement relations and 3-D constitutive equations of a layer are obtained by combination of 2-D and 1-D higher-order shape functions. In the elements, Lobatto shape functions and Gauss-Lobatto technique are employed to interpolate displacement fields and to implement numerical quadrature. Using the models and techniques considered, effects of composite laminate configuration according to inclined angles and adhesive properties on the performance of bonded composite patch are investigated. In addition to these, the out-of-plane bending effect has been investigated across the thickness of patch repaired laminate plates due to the change of neutral axis. The present model provides accuracy and simplicity in terms of stress intensity factors, stress distribution, number of degrees of freedom, and energy release rates as compared with previous works in literatures.

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.5
• /
• pp.691-697
• /
• 2011

The purpose of this study was to determine the possibility of using Opuntia ficus-indica as a natural health food source. To accomplish this, the contents of general and antioxidative nutrient contents of Opuntia ficus-indica were measured. The carbohydrate, crude protein, crude fat and crude ash were 66.79%, 5.51%, 9.89% and 9.29%, respectively. The calorie contents of Opuntia ficusindica was 378.21 kcal. The content of total dietary fiber was 36.54%. The essential and non-essential amino acids contents were 1,635.14 mg and 3,012.68 mg, respectively. Potassium was the most abundant mineral followed by Ca, Mg, and Na, showing that Opuntia ficus-indica is an alkali material. The electron-donating activity (EDA) of Opuntia ficus-indica was 29.85~44.57%, and the activity was dependent on the sample concentration. Total phenolic content of Opuntia ficus-indica was 2.21 ${\mu}g$/mg, and total flavonoids content was estimated as 1.80 ${\mu}g$/mg. Opuntia ficus-indica extract showed the highest reducing power (OD 700=3.18) at a concentration of 6.25 mg/mL. Based on the above results, we determined that the Opuntia ficus-indica has potential antioxidant activities.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.13-18
• /
• 2020

Iron oxide nanoparticles were microencapsulated using fibroin, a protein polymer of silk fiber, for theragnostic applications. The content of iron oxide was determined to be 4.28% by thermogravimetric analysis and 5.11% by magnetometer. A suspension of murine fibroblast 3T3 cells grown in medium supplemented with iron oxide-microcapsules turned clear in response to the magnetic force and the cells aggregated to the magnet direction. Neodymium magnets placed on the top of the culture dish, and attracted cells to the center of the culture surface. The cells collected on the culture surface aggregated to form a rough spheroid of 2 mm in a diameter after 72 h. In the outer layer of the cell aggregate, cells were relatively large and gathered together to form a dense tissue, but the central part was observed to undergo cell death due to the mass transfer restriction. In the outer layer, iron oxide-microcapsules were lined up like chains in the direction of magnetic force. Using microCT, it was demonstrated that the iron oxides inside the cell aggregate were not evenly distributed but biased to the magnetic direction.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.11
• /
• pp.1588-1596
• /
• 2006

An experiment was conducted to study the effect of different dietary protein levels on the performance, nutrient balances, blood biochemical parameters and thyroid hormones of crossbred calves. Thirty crossbred (Bos taurus${\times}$Bos indicus) calves aged 3-5 months were divided into 3 equal groups of 10 each and fed graded levels of crude protein, namely 100 (NP), 75 (LP) and 125 (HP) percent of the Kearl recommendations for 105 d. The calves had access to ad libitum oat hay as the basal roughage. A metabolism trial of 6 d duration was conducted at 90 d of the study. Blood collection and its analysis for various hematological and biochemical parameters as well as thyroid hormones was done both during the pre- and post-experimental periods. The fortnightly body weight changes and the net gain did not differ significantly due to dietary variation. The average daily gain was $367{\pm}21.6$, $347{\pm}22.9$ and $337{\pm}26.4g$ in calves fed NP, LP and HP diets, respectively. Averaged across the feeding trial, oat hay intake was higher (p<0.05) in NP animals than HP or LP fed groups. The dry matter (DM) intake showed no significant difference between the 3 groups but the DM digestibility was higher (p<0.05) in the HP fed animals. The digestibility of crude protein, organic matter, crude fiber and nitrogen-free extract was significantly higher (p<0.05) on HP diets compared to LP or NP diets. The calves on all 3 diets were in positive nitrogen (N) balance, however the N retention was higher (p<0.05) in HP than in LP fed calves. The intake and retention of calcium and phosphorus were similar between the treatments. The blood biochemical profile revealed no significant influence of the dietary treatments on hemoglobin, packed cell volume as well as serum levels of glucose, total protein, albumin, globulin, Ca, P, and alkaline phosphatase. Serum levels of the circulating thyroid hormones ($T_3$ and $T_4$) tended to be lower (p>0.05) on feeding of the LP diet besides showing an increasing trend with the advancement of age. Considering the similar performance and metabolic profile, it could be concluded that crossbred calves can be satisfactorily reared on 25% lower protein level as recommended by Kearl for developing countries, which would not only economize the cost of production but also help to reduce environmental pollution attributable to livestock production.

• The Korean Journal of Food And Nutrition
• /
• v.28 no.3
• /
• pp.428-435
• /
• 2015

This study was conducted to investigate the quality characteristics of instant gruel containing ear mushroom and black rice with the goal of improving the added value and increasing the consumption of ear mushroom. To make ear mushroom instant gruel using the puffing technique, the proportion of white rice to black rice and the amounts of dried ear mushroom added ranged from 75~100% : 25~0% and 0~4%, respectively. Based on rapid visco analysis (RVA) of gruel powder, peak viscosity, holding strength, final viscosity and set back increased as we increased the proportion of dried ear mushroom and decreased that of black rice. The gruel made of 80% white rice : 20% black rice and 3% dried ear mushroom contained $18.53{\mu}g/100g$ vitamin $D_2$, 3.73 g/100 g dietary fiber and is therefore expected to improve bone health and bowel movement. Also, the DPPH free radical scavenging activity for this gruel was 56.7%, which indicates high antioxidant activity. In contrast, using 100% white rice or 75% white rice : 25% black rice adversely affected the taste and flavor of the gruel.

• Conservation Science in Museum
• /
• v.15
• /
• pp.96-121
• /
• 2014

Portrait of Sim Huisu is a seventeenth-century Joseon portrait of a meritorious vassal. The National Museum of Korea currently owns two portraits of Sim Huisu, which are the eldest son's family and by the eldest grandson of the family's second eldest son. Both were donated in 1980. Portraits were still in its original mounting, but the supporting silk had been damaged and stained in a flood. Conservation treatment was undertaken to restore the original style, and scientific analysis, such as, X-ray, XRD, XRF and Graff "C" stain, was conducted to study the materials and painting techniques. The support silk was found to be refined fibroin and a plain weave consisting of two weft threads and one warp thread. The lining papers were found to be bamboo fiber paper of first layer in China and Korean traditional mulberry paper in second. Various pigments were identified in the painting, including white lead, cinnabar, atacamite, ink stick, azurite, silver, and gold. The study also confirmed the use of the back painting, with colors such as white ^{White Lead}, green ^Atacamite, orange ^Minium, black ^{Ink Stick}, and yellow ^Dye. Also, it was found that stick ink or dye was used with white lead.