• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.1 no.2
• /
• pp.144-153
• /
• 1991

This study was conducted to evaluate worker exposure to airborne asbestos fibers by industry, and to evaluate polarized-light microscopy for determining airborne asbestos fibers. A total of 11 plants including asbestos textile, brake-lining manufacturing, slate manufacturing, and automobile maintenance shops were investigated. Rsults of the study are summarized as follows. 1. Worker exposure levels to airborne asbestos fibers were the highest in asbestos textile industry, followed by brake-lining manufacturing, slate manufacturing, and automobile maintenance shops, in order. In asbestos textile industry, large variation of asbestos levels was found by plants. The worst plant indicated airborne fiber concentrations in excess of 10 fibers/cc, however, the best plant showed concentrations within 0.50 fibers/cc. 2. Characterization of airborne fibers by industry indicated that fibers from asbestos textile industry were the longest with the largest aspect ratio. Fibers from automobile maintenance shops were the shortest with the smallest aspect ratio. Based on characteristics of fibers and the highest levels of concentrations, it is concluded that workers in the asbestos textile industry are exposed to the highest risk of producing asbestosis, lung cancer, and mesothelioma. 3. Result s obtained using polarized-light microscopy were $43.7{\pm}12.3%$ of the results obtained using phase contrast microscopy. This may be resulted from the worse resolution of polarized-light microscopy than that of phase contrast microscopy. Based on the results, it is recommended that polarized-light microscopy be used for mainly bulk sample analyses and further study be performed to improve the method for determining airborne samples. However, polarized-light microscopy can be used for determining thick fibers.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.4
• /
• pp.328-336
• /
• 2004

This paper describes the effect of loading rate, specimen geometries and material properties for ModeⅠ and Mode Ⅱ interlaminar fracture toughness of hybrid composite by using double cantilever beam (DCB) and end notched flexure (ENF) specimen. In the range of loading rate 0.2~20mm/min, there is found to be no significant effect of loading rate with the value of critical energy release rate (Gc).The value of Gc for variation of initial crack length are nearly similar values when material properties are CF/CF and GF/GF, however, the value of Gc are highest with the increasing intial crack length at CF/GF. The SEM photographs show good fiber distribution and interfacial bonding of hybrid composites when the moulding is the CF/GF.

• Journal of architectural history
• /
• v.19 no.3
• /
• pp.89-106
• /
• 2010

Since the 1970's, UNESCO and ICOMOS have adopted or emphasized on the principles of historic preservation. One of them is what to require a repair should not be repaired beyond the limits of the features and techniques which had been adopted in those days of establishment. On the premise, this paper is to examine the materials and technique of wall plaster work in the government building constructions in the Joseon dynasty. The result of this examination shall come up with a basic conformity in the case of repairing the building established in the late of Joseon dynasty. This paper is carried out for the proper repair and restoration of architectural cultural properties. Construction reports and other documents in those days are examined for the study. Following conclusions have been reached through the study. The materials and technique which applied to wall plaster work in those days were quite different from the present. The technique that was used to wall plaster of government buildings in those days was not a lime wall plaster, but sand coat one. The kinds of material for setting of the sand coat wall plaster had been revised with the change of the times or constructions. The main kinds of material were composed of sand, white clay, paper fiber, and cereal starch. However, the present materials were composed of sand, white clay. Therefore, the present materials and technique which applied to wall plaster work for the repair and restoration of architectural cultural properties have to be revised and corrected.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.8 no.1
• /
• pp.23-29
• /
• 2010

Purpose : This study is to offer clinical primary data that examines the change of imaging structure and the quantitative evaluation of muscle activity on myofascial trigger points. This study examines neuromuscular physiological characteristic by comparing the differences in physical findings, pressure pain threshold, imaging, and electrophysiological characteristics in latent and active myofascial trigger points muscle and normal muscle through the following experimental procedures. Methods : The participants for the study were thirty-three adults in their twenties. We divided three groups into normal, latent and active myofascial trigger points groups by physical findings. We analyzed the results of measured pressure pain, threshold for pain, ultrasound imaging perform for structure characteristic of muscle, surface EMG according to type of muscle contraction for function of muscle contraction. Results : Significant differences were indicated in pressure pain threshold (p<0.05). Significant differences were discovered in the ultrasound imaging analysis. There were increases in muscle Echogenicity white area index (p<0.001). There were significant differences that decrease in %MVIC (p<0.05), increase in MDF (p<0.05). Conclusion : From these results, active rnyotascial trigger points muscle showed quality deterioration on ultrasound imaging and decreased function of muscle contraction, increased motor unit action potential of II type fiber, and electrophysiologically. Imaging structure and neuromuscular physiological characteristic can be diagnostic and quantitative analytical techniques for myofascial pain syndrome and a primary factor that reflected in physical therapy intervention.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.1
• /
• pp.27-33
• /
• 2011

Carbon board, an electromagnetic shielding new material, is expected to be applied to the art wall by combining draft designs. When environment-friendly architecture materials are used as an interior wall, they are suitable as finishing materials. According to the increasing tendency of the application of carbon board, various styles could be made by decorating the whole or a part of a wall with tiles with module structure or by patterning the wall with panel-type woodcut or pictures or sculpture. And more graphic design based on diverse variation, and reconstruction and combination between other motif is being on the rise as a new expression. In this paper, make it possible to applying in MDF board and carbon board pattern design using the woodcut technique. The structural and physical properties were compared by usability of abrasion, toughness, stability. Samples are analyzed dependent on the hardness and relative density, change of detail pattern design and trimming technique. These results have shown that the possibility of applying of carbon board can be a high rank interior materials, capable of creating value of the living system, connects with MDF board, also can express humanism in a beautiful manner.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.365-371
• /
• 2019

In this study, the flame temperature distribution of the diffusion flame burner for SiO₂ deposition was analyzed by the computational fluid analysis. This corresponds to the previous step for simulating the SiO₂ preform deposition process for manufacturing optical fibers using environmentally friendly raw materials. In order to model premixed combustion, heat flow, convection, and chemical reactions were considered, and Reynolds-averaged Navier-Stokes equations and k-ω models were used. As a result, the temperature distribution of the flame showed a tendency to increase the distance from the nozzle surface to the maximum temperature when the flow rate of the auxiliary oxygen increased. In addition, it was confirmed that the temperature distribution due to incomplete combustion was large in the combustion reaction with a large equivalence ratio of the mixed gas.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.5
• /
• pp.33-39
• /
• 2008

We have experimentally demonstrated the transmission performance of a feedforward optical transmitter using an external light injection technique. The feedforward compensation method shows 31 dB intermodulation distortion suppression and 2.2 dB noise reduction. A high side-mode suppression ratio exceeding 35 dB of the wavelength of the locked Fabry-Perot laser diode was obtained over 12 nm ranges. The suppression characteristics of the intermodulation distortion for various wavelength differences and transmission lengths were measured and analyzed as the evaluation criteria for the system performance in WDM/SCM based radio-over-fiber systems.

• Progress in Superconductivity and Cryogenics
• /
• v.18 no.1
• /
• pp.46-49
• /
• 2016

The wireless power transfer (WPT) system using a magnetic resonance was based on magnetic resonance coupling of the transmission and the receiver coils. In these system, it is important to maintain a high quality-factor (Q-factor) to increase the transmission efficiency of WPT system. Our research team used a superconducting coil to increase the Q-factor of the magnetic resonance coil in WPT system. When the superconductor is applied in these system, we confirmed that transmission efficiency of WPT system was higher than normal conductor coil through a preceding study. The efficiency of the transmission and the receiver coil is affected by the magnetic shielding effect of materials around the coils. The magnetic shielding effect is dependent on the type, thickness, frequency, distance, shape of materials. Therefore, it is necessary to study the WPT system on the basis of these conditions. In this paper, the magnetic shield properties of the cooling system were analyzed using the High-Frequency Structure Simulation (HFSS, Ansys) program. We have used the shielding materials such as plastic, aluminum and iron, etc. As a result, when we applied the fiber reinforced polymer (FRP), the transmission efficiency of WPT was not affected because electromagnetic waves went through the FRP. On the other hand, in case of a iron and aluminum, transmission efficiency was decreased because of their electromagnetic shielding effect. Based on these results, the research to improve the transmission efficiency and reliability of WPT system is continuously necessary.

• Journal of the Korean Society of Safety
• /
• v.28 no.4
• /
• pp.1-7
• /
• 2013

Train accidents can be directly connected to fatal accidents-collision, derailment, Fire, railway crossing accidents-resulting in tremendous human casualties. First of all, the railway derailment is not only related to most of railway accidents but also it can lead to much more catastrophic accompanying train overtured than other factors. Therefore, it is most important factor to ensure railway safety. some foreign countries have applied to the detector machines(e.g., ultrasonic detector car, sleep mode, current detector, optical sensing, optical fiber). Since it was developed in order to prevent train from being derailed. In korea, the existing track method has been used to monitor rail condition using track circuit. However, we found out it impossible for Communication Based Train Control system(CBTC), recent technology to detect rail condition using balise(data transmission devices) without no track circuit. For this reason, it is needed instantly to develop real-time monitoring system used to detect broken rails. Firstly, this paper presents domestic and international statues analysis of rail breaks technology. Secondly, the composition and the characteristics of the real-time monitoring system. Finally, the evidence that this system could assumed the location and type of broken rails was proved by the experiment of prototype and operation line tests. We concluded that this system can detect rail break section in which error span exist within${\pm}1m$.

• Preventive Nutrition and Food Science
• /
• v.15 no.2
• /
• pp.113-119
• /
• 2010

The aim of this study was to investigate changes in 7 nutritional components (fatty acid, protein, fat, ash, total dietary fiber (TDF), $\gamma$-aminobutyric acid (GABA), and $\gamma$-oryzanol) of paddy rice (PR) and brown rice (BR) throughout the germination process, as measured at different shoot lengths (10 mm, 20 mm, and 30 mm). With the increase of shoot length, the nutritional components' concentrations increased, as compared to the concentrations measured before germination. Moreover, BR exhibited higher GABA, $\gamma$-oryzanol, and protein than PR. Among the components, TDF, GABA, and $\gamma$-oryzanol showed significant concentration differences throughout germination, while the others exhibited only slight variations. In particular, GABA and $\gamma$-oryzanol were predominantly increased in grains of 10 mm shoot length. These compounds might prove to be important factors from germinated rice. Additionally, the germinated cultivar 'Keunnun' might also prove to be a very important food source, owing to its high GABA and $\gamma$-oryzanol contents. These results suggest that variations in nutritional components related to the increase of shoot length may prove to be important when considering the beneficial aspects of rice on human health.