• Composites Research
• /
• v.25 no.5
• /
• pp.136-140
• /
• 2012

This paper describes the bone healing process of fractured long bones such as a tibia applied by composite IM rods using finite element analysis. To simulated tissue differentiation process mechano-regulation theory with a deviatoric strain was implemented and a user's subroutine programmed by a Python code for an iterative calculation was used. To broadly find the appropriate rod modulus for healing bone fractures, composite IM rods were analyzed considering the stacking sequence. To compare mechanical stimulation at fracture gap, two kinds of initial loading conditions were applied. As a result, it was found that the initial loading condition was the most sensitive factor for the healing performance. In case a composite IM rod made of a plain weave carbon fiber/epoxy (WSN3k) had a stacking sequence of $[{\pm}45]_{nT}$, the healing efficiency was the most effective under a initial load of 10%BW.

• Structural Engineering and Mechanics
• /
• v.22 no.6
• /
• pp.665-683
• /
• 2006

The strength behaviors of Fiber Reinforced Plastics (FRP) Composites can be greatly influenced by the properties of constitutive materials, the laminate structures, and load conditions etc, accompanied by many uncertainty factors. So the reliability study on FRP is an important subject of research. Many achievements have been made in reliability studies based on the probability theory, but little has been done on the roles played by fuzzy variables. In this paper, a fuzzy reliability model for FRP laminates is established first, in which the loads are considered as random variables and the strengths as fuzzy variables. Then a numerical model is developed to assess the fuzzy reliability. The Monte Carlo simulation method is utilized to compute the reliability of laminas under the maximum stress criterion. In the second part of this paper, a generalized fuzzy reliability model (GFRM) is proposed. By virtue of the fact that there may exist a series of states between the failure state and the function state, a fuzzy assumption for the structure state together with the probabilistic assumption for strength parameters is adopted to construct the GFRM of composite materials. By defining a generalized limit state function, the problem is converted to the conventional reliability formula that enables the first-order reliability method (FORM) applicable in calculating the reliability index. Several examples are worked out to show the validity of the models and the efficiency of the methods proposed in this paper. The parameter sensitivity analysis shows that some of the mean values of the strength parameters have great influence on the laminated composites' reliability. The differences resulting from the application of different failure criteria and different fuzzy assumptions are also discussed. It is concluded that the GFRM is feasible to use, and can provide an effective and synthetic method to evaluate the reliability of a system with different types of uncertainty factors.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.2 s.23
• /
• pp.77-82
• /
• 2005

Previously sailing yachts or leisure yachts were mainly made from FRP(Fiber glass reinforced plastic) in the small shipbuilding, but recently there is a trend to replace it for steel or aluminum to substitute FRP for environmental friendly materials. Although It have to need a many checked item in case of hull girder strength and transverse strength normally evaluate base on calculation of class guideline so called direct calculation method. Otherwise. this method of initial structural design considered enough for safety margin on the structure. But, case of small craft must consider for evaluating local strength through rational method. In this paper, check the bow structure members for satisfying results base on allowable stress criterion of damaged bow structure by dynamic load due to slamming and bottom impact load due to pitching motion through finite element analysis. and investigate engine bed structure considering engine weight load and transverse wave load.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.3
• /
• pp.261-268
• /
• 2001

An investigation on nondestructive evaluation of thermal stress-nduced damage in the composite laminates (3mm in thickness and $[+45_6/-45_6]_s$ lay-up angles) has been performed using the thermo-acoustic emission technique. Reduction of thermo-AE events due to repetitive thermal load cycles showed a Kaiser effect. An analysis of the thermo-AE behavior determined the stress free temperature of composite laminates. Fiber fracture and matrix cracks were observed using the optical microscopy, scanning electron microscopy and ultrasonic C-sean. Short-Time Fourier Transform of thermo-AE signals offered the time-frequency characteristics which might classily the thermo-AE as three different types to estimate the damage processes of the composites.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.3
• /
• pp.233-239
• /
• 2004

Smart material is used in various applications such as for glass frame, for medical instruments and for a part of sensors. Smart composite materials ran be applied to a part of aircraft and to the on-line monitoring system for industrial structures, using the shape memory effect. However, it is very difficult to simulate and analyze the shape memory effect in smart composites. In this paper, a two dimensional axisymmetric model was proposed to analyze the smart composite of one fiber and matrix using the finite element method(FEM). The finite element analysis was carried out in two renditions of the room temperature(293K) and a higher temperature (363K). The results we.e compared with the experimental results to confirm the validity of the analysis. In addition, the acoustic emission(AE) technique was used to study the microscopic damage behavior and the effect of pre-strains on TiNi/A16061 shape memory alloy composite.

• Journal of Korean Society on Water Environment
• /
• v.24 no.6
• /
• pp.801-805
• /
• 2008

A fibrous material (p-phenylene-2,5-benzobisoxazole, PBO) was used as an adsorbent for solid phase extraction in order to simplify the extraction procedure. The extraction performance for di-(2-ethylhexyl) phthalate (DEHP) was examined with two types of PBO fibers (HM (High modulus) and AS (Regular type) types) by batch type sorption/desorption experiments. When 100 mg of the HM fibers were applied to 20 mL of the aqueous DEHP solution (less than $50{\mu}g/L$), more than 95% of DEHP was adsorbed on the fibers, however, the AS type fibers adsorbed alkyl phthalate up to 80%. In the case of $50{\mu}g/L$ of the initial concentration of DEHP, the adsorbed DEHP was extracted effectively with methanol and the maximum overall recovery ratio was 92.3%. The results indicated that the PBO fibers could be used as an adsorbent for alkyl phthalate analysis, and that the extraction procedure was not affected by suspended solids in a water sample.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.4
• /
• pp.909-918
• /
• 2013

The objective of this study is to investigate the effects of dietary nutrient intakes for markers of blood glucose and inflammation which is important to the progress of type 2 diabetes and the development of its complications. For this study, 76 adults with diabetes (42 males, 34 females) were recruited from a group of patients who had visited the department of endocrine medicine. Data on anthropometric characteristics, clinical indices such as hemoglobin A1c (HbA1c) and C-reactive protein (CRP), and dietary nutrient intakes were collected. Our results have shown that 66% of subjects were either overweight or obese. Serum analysis indicates that levels of C-peptide, glucose, HbA1c, CRP, triglyceride, LDL-cholesterol were higher than normal range. Results from the dietary nutrient intake survey displayed that intakes of cholesterol and sodium were higher than Dietary Reference Intakes for Koreans. On the contrary, folate intake was lower than the guideline. Within the females, energy contribution from carbohydrate was higher than Korean Diabetes Association guideline. Statistical analysis has revealed a negative correlation between serum HbA1c level and dietary intakes of polyunsaturated fatty acid (PUFA), n-3 PUFA, ${\beta}$-carotene and vitamin E after adjustments for age, BMI, smoking habits, alcohol consumption, exercise and ingestion of diabetes mellitus medication (p<0.05). Serum CRP level was inversely associated with dietary intakes of carbohydrate, protein, vitamin C and fiber (p<0.05). Our results suggest that dietary nutrient intakes may influence the levels of HbA1c and CRP, and subsequently, it may help in the management/treatment of type 2 diabetes.

• Food Science of Animal Resources
• /
• v.37 no.6
• /
• pp.840-846
• /
• 2017

We investigated the physicochemical and sensorial properties of hamburger patties made with three different defatted soybean flour (DSF) preparations which differed in particle size. Coarse ($Dv_{50}=259.3{\pm}0.6{\mu}m$), fine ($Dv_{50}=91.5{\pm}0.5{\mu}m$), and superfine ($Dv_{50}=3.7{\pm}0.2{\mu}m$) DSF were prepared by conventional milling and sifting, followed by jet milling at 7 bars. Hamburger patties containing 5% of each DSF were prepared for a property analysis. The hamburger patties made with 5% superfine DSF showed the lowest cooking loss among the treatment groups (p<0.05). The patties with superfine DSF also retained the texture profile values of the control patties in terms of hardness, gumminess, springiness, and chewiness, while the addition of coarse and fine DSF increased the hardness and chewiness significantly (p<0.05). The sensorial results of quantitative descriptive analysis (QDA) indicate that the patties containing superfine DSF were softer and tenderer than the controls (p<0.05). Although the overall acceptability of the patties made with coarse and fine DSF was poor, the overall acceptability of the superfine DSF patty was the same as that of the control patty. These results suggest that superfine DSF is an excellent food material that can supply dietary fiber, while maintaining the physical characteristics and texture of hamburger patty.

• Journal of Environmental Health Sciences
• /
• v.35 no.4
• /
• pp.322-333
• /
• 2009

In this study, a measurement method was evaluated for the determination of polycyclic aromatic hydrocarbons (PAHs) in the ambient atmosphere. PAHs were sampled by high-volume samplers, and were then analysed with a GC/MS system. Particulate PAHs were collected on $8"{\times}10"$ quartz fiber filter, while vapor phase PAHs were adsorbed on polyurethane foam (PUF). Target compounds included a total of 36 PAHs, which are known to be frequently detected in the urban atmosphere. It was not necessary to clean-up samples before samples were analyzed using GC/MS, and the overall performance of the method was tested by a variety of quality control and quality assurance schemes. It is generally known that the clean-up procedure can negatively affect the recovery of samples. Precision and accuracy was evaluated using SRM provided by US NIST, and the results were generally satisfactory and reliable. However, the GC/MS method appeared not to be adequate for 6-rings PAHs, such as coronene, due to its lower sensitivity. In addition, collection efficiencies for low molecular compounds, such as 2-rings PAHs, were poor because of the lower retention volume of the PUF adsorbent. As a result, it was concluded that the method based on high-volume sampling and GC/MS analysis can give very reliable data by simultaneous sampling of both particulate and vapor phases for 3-rings to 5-rings PAHs of environmental concern.

• Journal of computational fluids engineering
• /
• v.20 no.4
• /
• pp.63-69
• /
• 2015

The thermal balance test in vacuum chamber for satellite structures is an essential step in the process of satellite development. However, it is technically and economically difficult to fully replicate the space environment by using the vacuum chamber. To overcome these limitations, the thermal analysis through a computer simulation technique has been conducted. The CFRP composite material has attracted attention as satellite structures since it has advantages of excellent mechanical properties and light weight. However, the nonuniform nature of the thermal conductivity of the CFRP structure should be noted at the step of thermal analysis of the satellite. Two different approaches are studied for the thermal analyses; a detailed numerical modeling and a simplified model expressed by an effective thermal conductivity. In this paper, the effective thermal conductivities of the CFRP composite structures are extracted from the detailed numerical results to provide a practical thermal design data for the satellite fabricated with the CFRP composite structure. Calculation results of the surface temperature and the thermal conductivities along x, y, z directions show fairly good agreements between the detailed modeling and the simplified model for all the cases studied here.