• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2005.11a
• /
• pp.213-219
• /
• 2005

목재자원의 부족과 천연물 가공시 부산물의 재활용 등 다양한 이유로 적용되는 비목재 펄프류의 섬유 성상과 특성은 최종 제품의 품질과 그 가공 공정등에 지대한 영향을 끼치게 된다. 이를 위하여 본 연구에서는 화상분석을 통한 비목재 펄프의 섬유성상 분석 방법을 모색하였고, 실제 다양한 성상의 담배 부산물을 그 원료로 제조되는 종이형태의 재구성 담배인 판상엽 제품의 구성성분 분석에 적용하여 그 적용 가능성을 평가하였다.

• Advances in aircraft and spacecraft science
• /
• v.7 no.6
• /
• pp.475-493
• /
• 2020

This paper is focused on the characterization of the thermomechanical properties of semicrystalline poly-ether-ether-ketone (PEKK) and of carbon fiberreinforced thermoplastic based laminated composites (C/PEKK) below and above the glass transition temperature (T_g). Differential Scanning Calorimetry (DSC), Dynamic Mechanical Analysis (DMA) and tensile tests are carried out on both pure PEKK polymer and [(±45)₂, +45]_s C/PEKK composite samples, showing a significant similarity in behavior. The employment of a simple micromechanical model confirms that the mechanical and physical behavior of the polymer and that of the matrix in the composite are similar.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.2
• /
• pp.93-103
• /
• 2004

In trench excavation, essential factor of earth-retaining temporary work structure should be easy taking to pieces and movement, and dead weight must be less. This paper studies about the light weight material and application as earth-retaining structure to prevent the slope failure of sand soil ground caused by the variation of groundwater level in trench excavation. That is, light weight earth-retaining structural is proposed and a simulation with FEM on application of proposed structural in sandy soil is presented. The results are summarized as follows; (1) The study proposed FRP H-shaped pannel for the light weight member, and also presented estimation method about stability. (2) Mechanical property (bending moment, shear force, axial force, displacement) were changed according to groundwater level, but these values had been within enough safety rate and allowable stress. Therefore, proposed light weight pannel with FRP is available for bracing structure in trench excavation.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.649-654
• /
• 2005

This study proposes a particular approach to assess information about NDVI(Normalized Difference Vegetation Index) and LAI(Leaf Area Index) from the spectroradiometer and NOAA/AVHRR satellite data. AVHRR data were collected in twelves months over a one year period in 2004. We calculated 10-day composite NDVI using daily composite AVHRR surface reflectance products(1km spatial resolution). The 10-day composite NDVI have a great effect on the plant growth conditions. Considerably, NDVI was increased by developing muscle fiber tissue from April to May. Then the NDVI increased until the August and then decreased until February. The highest month was at August and the lower month was at December. The difference NDVI analysis using December and another months data was conducted, the results were provided information on the variation of vegetation coverage. The result suggest that a relationship established between the LAI and NDVI in 2004.

• Applied Chemistry for Engineering
• /
• v.2 no.2
• /
• pp.147-154
• /
• 1991

Thermogravimetric measurements have been carried out to investigate the stabilization and carbonization of copolymer of acrylonitrile(95 wt %) and methyl acrylate(5 wt %) at various heating rates. The cyclization and dehydrogenation during the stabilization were important factors to determine pore development in the carbonization process. The pore and the specific surface area during the carbonization began to develope at the temperature higher than $400^{\circ}C$.

• Korean journal of food and cookery science
• /
• v.9 no.2
• /
• pp.67-73
• /
• 1993

The effects of addition of brown rice flour on the Backsulgies were examined. We chose the addition ratio of brown rice flour as 0%, 50%, 100% along with the pilot study. The addition of brown rice flour did not make significant changes in water-binding capacity, swelling power and the degree of gelatinization. But the addition of brown rice flour had a delaying effect of retrogradation of Backsulgies by textural analysis. In sensory evaluation, the Backsulgi added brown rice flour 50% had the highest value in the overall quality of sensory characteristics. But there was no significant difference in the other sensory characteristics between the 50% and 0% added with. Therefore we concluded that the addition of brown rice flour on Backsulgies improve the sensory characteristics as well as delay the retrogradation and would be a good source of dietary fiber.

• Food Science and Biotechnology
• /
• v.14 no.1
• /
• pp.28-31
• /
• 2005

To extract apple pectins, apple pomace (AP) was extruded under 14 different conditions of screw speed (250-350 rpm), feed rate of 30-40 kg/hr, and 20-30% moisture content using twin-screw extrusion. Response surface methodology (RSM), based on three variables by three-level factorial design, was employed to investigate effects of screw speed, feed rate, and moisture on dependent variables of extrudates, soluble dietary fiber (SDF), yield of anhydrogalacturonic acid ($Y_{AGA}$) representing pectin, and intrinsic viscosity ([${\eta}$]). Second order models were used to generate three-dimensional response surface for dependent variables, and their coefficients of determination ($R^2$) ranged from 0.96 to 0.99. Moisture content showed highest effect on solubilization of AP.

• Fibers and Polymers
• /
• v.6 no.2
• /
• pp.113-120
• /
• 2005

Helium-oxygen plasma treatments were conducted to modify poly(trimethylene terephthalate) (PIT) and poly(ethylene terephthalate) (PET) warp knitted fabrics under atmospheric pressure. Lubricant and contamination removals by plasma etching effect were examined by weight loss $(\%)$ measurements and scanning electron microscopy (SEM) analysis. Surface oxidation by plasma treatments was revealed by x-ray photoelectron spectroscopy (XPS) analyses, resulting in formation of hydrophilic groups and moisture regain $(\%)$ enhancement. Low-stress mechanical properties (evaluated by Kawabata evaluation system) and bulk properties (air permeability and bust strength) were enhanced by plasma treatment. Increasing interfiber and interyarn frictions might play important roles in enhancing surface property changes by plasma etching effect, and then changing low-stress mechanical properties and bulk properties for both fabrics.

• Fibers and Polymers
• /
• v.3 no.3
• /
• pp.109-112
• /
• 2002

Polybutadiene(PB) was epoxidized to various extents with m-chloroperbenzoic acid (MCPBA) in homogeneous solution. The thermal properties of the epoxidized PBs were investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). As a result of epoxidation the glass transition temperature (Tg) of PB increased by approximately $0.8^{\circ}$ for each 1 mol% of epoxidation. The thermal decomposition of the epoxidised PBs occurred in two-step process, while that of PB exhibited apparent one-step degradation process.

• Fibers and Polymers
• /
• v.7 no.2
• /
• pp.105-111
• /
• 2006

Coating the fibre surface by in situ oxidative chemical polymerisation of polypyrrole (using $FeCl_3$ as oxidant) is a readily industrial applicable way to give electrical properties to wool with good ageing stability [1], although pre-treatments are required to avoid damage of the cuticle surface due to the acidic condition of the process. FT-IR and EDX analysis reveal that organic sulphonates and sulphates, used as dopants, are absorbed by wool, while chlorine ions are preferably embedded on the polypyrrole layer. The resulting electrical conductivity seems mainly due to the presence of chlorine as counter-ion of polypyrrole; nevertheless, the presence of arylsulphonate in the polymerisation bath increases the electrical conductivity of the coating layer.