• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.3_4
• /
• pp.403-413
• /
• 2004

The purpose of this study was to investigate to wearing practices and consumer needs for stockings. 503 subjects were surveyed in 2002. Data were analyzed by frequency, $\chi$$^2$, ANONA(LSD) and factor analysis. The results were as follows; 1) Many subjects considered the colors, but a very few of them considered the components and handling signs when purchase their stockings. These tendencies show meaningful differences according to their ages, jobs and the status of whether they are married or single. The wearing rates of stockings show differences according to their physical characteristics and social demographical variables. 2) They demand that the exact fiber contents and the mixture ratios which the stockings have should be indicated, and also want the sizes of the stockings to be indicated by three steps according to their body sizes, and they ask that the stockings have more various colors. They required that the stockings should have good ventilation, durability, warmth-keeping, hygroscopicity and elasticity in leg parts, and anti static electricity or bacteria.

• Textile Coloration and Finishing
• /
• v.14 no.2
• /
• pp.77-77
• /
• 2002

Cotton fabrics dipped in cationic agent(3-chloro-2-hydroxypropyl trimethyl ammonium chloride) were irradiated with deep Ultra Violet Rays(UV), in the region of UV-C using the low pressure mercury lamp. The chemical changes of cationized cotton fabric surfaces were investigated by FT-IR analysis. The dyeabilities of the irradiated portions were investigated by dyeing with acid dyes. Deep UV(UV-C) irradiation broke O-H bonds in cotton fiber and oxidized the fibers. The dyeability of the UV irradiated portion were different from that of the portion not irradiated. Various pattern were gained from one bath dig dyeing by pattern mask. The tensile strengths of cotton fabrics were decreased in the UV irradiated portion. Washing fastness of cotton dyeings were good about 3∼4 grade and light fastness were fair about 2∼3 grade.

• Textile Coloration and Finishing
• /
• v.14 no.2
• /
• pp.1-8
• /
• 2002

Cotton fabrics dipped in cationic agent(3-chloro-2-hydroxypropyl trimethyl ammonium chloride) were irradiated with deep Ultra Violet Rays(UV), in the region of UV-C using the low pressure mercury lamp. The chemical changes of cationized cotton fabric surfaces were investigated by FT-IR analysis. The dyeabilities of the irradiated portions were investigated by dyeing with acid dyes. Deep UV(UV-C) irradiation broke O-H bonds in cotton fiber and oxidized the fibers. The dyeability of the UV irradiated portion were different from that of the portion not irradiated. Various pattern were gained from one bath dig dyeing by pattern mask. The tensile strengths of cotton fabrics were decreased in the UV irradiated portion. Washing fastness of cotton dyeings were good about 3∼4 grade and light fastness were fair about 2∼3 grade.

• Textile Coloration and Finishing
• /
• v.7 no.2
• /
• pp.55-62
• /
• 1995

Plasma polymerization of Perfiuoropropene(PFP) and n-Hexane was carried out in a tubular type reactor by means of 13.56MHz radio frequency generator at the fixed RF discharge power of 25W and at the pressures of 100mTorr, 140mTorr and 200mTorr. The thin films were deposited on PAN fabrics in order to improve the dimemsional stability of woven states in hot water laundry. IR spectroscopy was used for the analysis of the structures of the thin films deposited and SEM for examination of surfaces of the fabrics. the PAN fabrics, which were coated by thin films at several experimental conditions, were immersed in boiling water for 2 hours and then the dimension stability of woven states were evaluated. In spite of very thin films, the results of surface modification were satisfactory. In general the performace of thin films by PFP was superior to that of n-Hexane.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.7 no.3
• /
• pp.83-94
• /
• 2005

This paper is to analyze patterns for Indonesian traditional textiles. Ikat is the resist-dyeing process in which designs are reserved in warp or weft yams by tying off small bundles of threads with fiber resists to prevent the penetration of dye. Batik is the technique applying a wax resist before dyeing to form a pattern in negative. Ikat and batik are the most renowned textile arts of Indonesia. Patterns are classified as geometric pattern, plant pattern, animal pattern. Also this paper discusses the origins of ikat and batik. Therefore this Paper proposes the classification and feature extraction of ikat and batik patterns. The results of this study can be effectively applied to develop competitive pattern design for Indonesian textile market.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.3
• /
• pp.274-281
• /
• 2009

The carbon fiber epoxy composite material and aluminum have many advantages over other materials because of their high specific stiffness and good fatigue characteristics. Basically, the propeller shaft of automobile requires bending frequency of higher than 2,700 Nm and high natural frequency of higher than 9,200 rpm occurred by fast revolution. For this reason, natural frequency and torsion torque characteristics of hybrid shaft was studied in variation of its outer-diameter and thickness. Vibration and torque characteristics of hybrid shaft were compared by torsion tester, natural frequency experiments and FE analysis. Designed hybrid shaft satisfied its vibration and torque characteristics when its outer-diameter was 60 mm and thickness was 5 mm. Therefore, hybrid material enables to manufacture one piece structure hybrid propeller shaft rather than current two piece structure.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.6
• /
• pp.654-663
• /
• 2012

Damage induced by low velocity impact loading in aircraft composite is the form of failure which is frequently occurred in aircraft. As the consequences of impact loading in composite laminates, matrix cracking, delamination and eventually fiber breakage for higher impact energies can be occurred. Even when no visible impact damage is observed, damage can exist inside of composite laminates and carrying load of the composite laminates is considerably reduced. The objective of this study is to evaluate and predict residual strength behavior of composite laminates by impact loading and for this, tensile test after impact was carried out on composite laminates made of woven CFRP.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.1
• /
• pp.83-89
• /
• 2020

Personal air vehicle (PAV) is considered by aviation engineers as a solution to provide fast urban mobility. The purpose of designing a optionally piloted PAV (OPPAV) is to provide an individual air vehicle. The airframe structure is designed with high strength carbon fiber composite to reduce the aircraft weight. This paper presents an overview of sizing process for OPPAV at the conceptual design level. It consists of load analysis, structural sizing and development of efficient design allowable values for composite material. The weight is estimated based on sizing process, including strength and stiffness requirements. The objective of this study is to present a overview of structural sizing procedure and fast tool for preliminary design phases.

• The Korean Journal of Rheology
• /
• v.6 no.2
• /
• pp.104-118
• /
• 1994

단섬유 보강 플래스틱 재료의 사출성형 충전공정에서 금형재의 유동장이 섬유 배향 상태를 형성하는데 중요한 역할을 할 뿐만 아니라 섬유의 배향상태가 역으로 유동장에 영향 을 미친다. 충전유동과 섬유 배향의 연계해석을 위하여 단섬유에 의한 추가적인 응력을 포 함하는 Dinh과 Armstrong의 이방성 구성방정식을 충전유동의 해석에 도입하였다. 평명방향 으로의 속도구배에 의한 응력을 고려하여 새롭게 유도된 압력 지배방정식과 에너지방정식을 유한요소법과 유한차분법을 이용하여 풀고 동시에 2차배향텐서의 변화방정식을 4차 Runge-kutta 방법을 이용하여 풀었다. 절점 게이트 주변의 확장유동영역과 라인게이트를 통한 수축유동영역에서 평면방향으로의 속도구배에 의한 응력이 유동장에 미치는 영향을 고 찰하였다. 확장유동영역에서는 평면방향으로의 속도구배에 의한 영향이 추가적인 유량으로 나타나면서 주어진 유량조건하에서 평면방향으로의 속도구배에 의한 응력을 고려하지 않은 경우보다 작은 압력구배를 나타냈다. 수축유동영역에서는 위와 반대의 결과를 보였다. 이러 한 경향은 섬유의 부피분율이증가하거나 모양비가 커짐에 따라 증가한다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.195-198
• /
• 2005

A solid-phase microextraction and gas chromatography-mass spectrometry for the extraction and analysis of methyl-tert-butyl ether has been described. methyl-tert-butyl ether was extracted from aqueous solution using SPME fiber coated polydimethylsiloxane and analysed by GC-MS with capillary column. Extraction parameters and chromatographic separation conditions were optimized. The applied method represented good analytical performance in terms of precision (3-8%, RSD) and accuracy(93-102%, mean recovery) with a method detection limit of 0.03 ppb.