• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12A
• /
• pp.1285-1290
• /
• 2004

In this paper, a new algorithm for contention resolution in optical burst switched network is proposed and simulated. The proposed algorithm is made from the all mixing of wavelength conversion, deflection routing, segmentation, and optical fiber delay line buffering. We analysis the performance of the proposed contention resolution algorithm by using ns-2. The application of the algorithm into Korea backbone network shows the superior performance of a low burst loss probability.

• Fibers and Polymers
• /
• v.2 no.2
• /
• pp.75-80
• /
• 2001

The thermal degradation of poly(ethylene terephthalate-co-isophthalate)s (PETIs) is investigated by using isothermal thermogravimetric analysis at the temperature range of 280-31$0^{\circ}C$. The degradation rate of PETIs is increased as the mole ratio of ethylene isophthaloyl (EI) units in PETIs increases. The activation energies for the thermal degradation of poly(ethylene terephthalate), PETI(5/5), and poly(ethylene isophthalate) are 33.4, 16.6, and 8.9 kcal/mole, respectively. The degradation rate of PETIs is influenced by their volatile cyclic oligomer components formed during the polymerization and the thermal degradation. It is simulated by the rotational isomeric state model that the content of cyclic dimer in PETIs, which is the most volatile cyclic oligomer component, increases with the EI units in PETIs.

• Fibers and Polymers
• /
• v.2 no.4
• /
• pp.184-189
• /
• 2001

Continuous photografting/crosslinking of polyethyleneglycol dimethacrylate oligomers onto cotton using a water-soluble benzophenone photoinitiator was investigated. Photografting increased with increasing irradiation dose, oligomer concentration and photoinitiator concentration. Maximum grafting efficiency of DM 400 and 600 were 83% and 79%, respectively. the photografting increased the wrinkle resistance of cotton implying surface crosslinking of cotton. bothsurface crosslinking and bulk crosslinking of cotton were accomplished via dual curing of a mixed formulation containing both a thermally curable component (BTCCA/SHP) and a UV-curable component. The wrinkle resistance of the crosslinked cotton was found to be higher when cured by thermal curing due to the facile post-polymerization of the UV active component. The presence of crosslinks in the dually crosslinked cotton was verified with FT-IR and thermogravimetric analysis.

• Fibers and Polymers
• /
• v.2 no.4
• /
• pp.190-195
• /
• 2001

Additives, such as sodium perborate and borax, were examined in dialdehyde wrinkle resistant finishing of cotton. Results indicated that the whiteness index(WI) of cotton treated with dialdehyde and additive showed about 90% of WI of the untreated cotton but with decrease in wrinkle recovery angle (WRA) due to inhibition effect of these additives. Effect of additive on the WRA reduction was more prominent with glutaraldehyde than with glyoxal. Reduction in WRA of cotton treated with both dialdehydes and boron compound was minimized by simultaneous addition of formic acid in the bath. Addition of formic acid was also generally beneficial in maintaining WI retentions after 8 months storage. Furthermore, boron compounds were also effective in improving retentions of mechanical properties. By FTIR analysis the residual aldehyde group was detected on the dialdehyde-finished cotton, whereas no peak was shown by addition of boron compounds. This suggested that the residual aldehyde group was a main cause of fabric yellowing on the dialdehyde-finished cotton. Dialhehyde with boron compound, therefore, can be used to replace a conventional formaldehyde-containing wrinkle resistant finishing of cotton.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.198-202
• /
• 2004

An analytical model using expanded bridging model was proposed to predict the elastic properties and behaviors of stitched multi-axial warp knitted (MWK) fabric composites, The characteristics of MWK fabric composites are the assemblage of multi-layers of fiber bundles for in-plane reinforcement and stitch yams for the through-the-thickness reinforcement. In the analysis, a representative volume of the MWK fabric composite was identified, The geometric limitations, effects of stitching yams and design parameters of MWK fabric composites were considered in the model. Then, the elastic properties and behaviors of MWK fabric composites were predicted, Finally, the results of proposed model of the composites were verified through the experiments, The predicted results were in fair agreement with the experimental results

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.179-182
• /
• 2003

This research aims to establish an optimal design method of filament wound structures. So far, most design and manufacturing of filament wound structures have been based on manufacturing experiences, and there is no established design rule. In this research, possible winding patterns considering the windability and the slippage between fiber and mandrel surface were calculated using the semi-geodesic path algorithm. In addition, finite element analyses using a commercial code, ABAQUS, were performed to predict the behavior of filament wound structures. On the basis of the semi-geodesic path algorithm and the finite element analysis method, filament wound structures were designed using the genetic algorithm.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.252-256
• /
• 2002

본 연구에서는 유리섬유/나일론 6 복합재료의 계면특성에 미치는 실란계 사이징제의 영향을 조사하기 위하여 microbonding test, short-beam shear test 그리고 dynamic mechanical analysis 방법을 사용하였다. 전자의 미시적인 방법과 후자의 두 가지 거시적인 접근 방법으로부터 얻은 유리섬유/나일론 6 복합재료의 계면특성에 대한 결과가 서로 일치하였다. 상업적으로 사이징 처리된 경우와 비교할 때, 본 연구에 적용된 네 종류의 실란계 사이징제는 유리섬유-나일론 6 수지의 계면결합력을 크게 향상시켰다. 특히, 3-chloropropyltrimethoxysilane (Z-6076)의 사용은 유리섬유/나일론 6 복합재료의 계면전단강도와 층간전단강도를 가장 두드러지게 증가시켰다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.11
• /
• pp.1767-1776
• /
• 2001

For the stable operation of high speed air spindle, the low rotational inertia and high damping ratio of spindle shafts as well as high fundamental natural frequency are indispensable. Conventional steel spindles are net appropriate for very high speed operation because of their high rotational inertia and low damping ratio. In this study, a high speed spindle composed of carbon fiber epoxy composite shaft and steel flange was designed for maximum critical speed considering minimum static deflection and radial expansion due to bending load and centrifugal force during high speed relation. The stacking angle and the stacking thickness of the composite shaft and the adhesive bonding length of the 7teel flange were selected through vibrational analysis considering static and thermal loads due to temperature rise.

• Journal of the Korean Society of Costume
• /
• v.21
• /
• pp.87-99
• /
• 1993

The fiber morphologies of the textiles from the burials of the Seip group of Ohio Hopewell (ca. 100 B.C. to A.D. 500)mounds were examined using light and scanning electron microscopy. A theoretical model was proposed which delineates the rate of morphological change in fibers through time and the cultural activities which occur during the life of a textile element. The Seip textiles were categorized according to their visual and structural characteristics. The microscopic examination of the Seip textiles yielded the evidence of animal hair fibers and bast fibers. The animal hair fibers of the seip textiles were identified as the hair of rabbit or hare. The bast fibers of the Seip textiles exhibited variation in morphological features such as the degree of bundle separation and the presence of transverse striations, fibrillations, or trans-verse cracks.

• Advanced Composite Materials
• /
• v.18 no.2
• /
• pp.105-119
• /
• 2009

In this work, the structural response of thin-walled composite beams with pretwist angle is investigated by using a mixed beam approach that combines the stiffness and flexibility methods in a unified manner. The Reissner's semi-complimentary energy functional is used to derive the stiffness matrix that approximates the beam in an Euler-Bernoulli level for extension and bending and Vlasov level for torsion. The bending and torsion-related warpings induced by the pretwist effects are derived in a closed form. The developed theory is validated with available literature and detailed finite element structural analysis results using the MSC/NASTRAN. Pretwisted composite beams with rectangular solid and thin-walled box sections are illustrated to validate the current approach. Acceptable correlation has been achieved for cases considered in this study. The effects of pretwist and fiber orientation angles on the static behavior of pretwisted composite beams are also studied.