• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1261-1261
• /
• 2001

Mixed feeds and their components are a very diverse matrix compared to other agricultural products worked on with NIRS classically. On a database of mixed feeds and their components (n=2.500) universal PLS calibrations and “local” calibrations were compared. The results from validation (n=600) show the potential of the calibrations and their limitations. Crude protein, crude fiber, crude fat, sugar and starch are predicted with SEPs of 0.6%, 1%, 0.3%, 1% and 1.5%, respectively. Ash content of 15% and more in several mixed feeds or components as well as rare components limit the use of NIRS for routine analyses.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.9
• /
• pp.56-61
• /
• 2011

The temperature of power transformers is very important factor for power system operation in substation because load capacity and limited lifetime of power transformers are determined by winding temperature. Also, The temperature of power transformers varies with the structure, capacity, operation condition and manufacturers. Thus, it is necessary for temperature distribution to be exactly investigated because of efficient load management and prediction of limited lifetime. Nevertheless, there was no case of analysis as well as measurement of the temperature of power transformers. In this paper, we manufactured the 154kV standard power transformer for the test. And we measured the temperature by the heat run test and analyzed the temperature distribution of transformer.

• The Korean Journal of Food And Nutrition
• /
• v.14 no.3
• /
• pp.222-227
• /
• 2001

The production results of the oriental functional beverage, which is aimed at reducing the alcohol concentration in blood, are as follows. Different kinds of herb medicine ingredients were combined to achieve the balance between Yin And Yang. They were grouped according to their respective characteristics and extracted by heat, Then they were combined and produced following the most effective mixture ratio. The drink produced by this way consisted mainly of water, Sugar, mineral, protein and fiber were partially contained. Among the minerals, the proportion of calcium, potassium, magnesium was high and iron was also contained. This drink turned out to be effective in reducing the alcohol concentration in blood within a very short time when it was taken once after drinking and taken aging 30 minutes later, which would double the dosage. This result shows that development of such a functional beverage using the herbal medicine, At the same time it will play an important part in reducing the alcohol concentrate in blood after drinking liquors.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.5
• /
• pp.425-433
• /
• 2000

This study was conducted to estimate the prevalence of ametropias such as myopia and hyperopia from the community based population study. Another purpose of this study was to determine the association between ametropia and nutrient intake. The study subjects was 492 residents over 20 years of age residing in Kuri City. Ametropia was tested based on re(rector error using auto referactor. Nutrient intake was estimated from the dietary survey using 24 hour recall method. As a result of data analysis, the prevalence of myopia was 57% and that of hyperopia was 11%. Such a high rate of ametropia prevalence may suggest the increasing risk of eye health in a Korean society. Nutrient intake of myopia group was 5∼15% higher than that of normal group in most of the nutrients. Whereas intake of most nutrient except calcium, retinal, fiber for the hyperopia group was lower than that of normal group. The result may suggest that inbalance of nutrient intake has been related with ametropia.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.159-164
• /
• 2001

In this study, a polymer mortar sandwich panel (PMSP) was developed : Core was made with the polymer mortar whose compressive strength was about 840 kgf/$\textrm{cm}^2$, and both facings were made with the glass fiber reinforced plastics (GFRP). The results showed that the strain energies and the ductility indices increased 16-340 times and 2-8 times, respectively, as the thicknesses of facings increased from 0.6 to 3.0mm with fixing the core thickness to constants (12-36mm). On the other hand, these values showed a tendency of decrease as the core thickness increased regardless of thickness of facings. A set of basic data for the structural analysis could be provided by investigating the correlations, within the scope of this research, between the resisting moment and the thicknesses of core and facings.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.105-110
• /
• 2002

In this study, a MMA modified polymer mortal sandwich panels was developed : Core was made with the MMA modified polymer mortar whose compressive strength was about 1020 kgf/cm$^2$, and both facings were made with the glass fiber reinforced plastics (GFRP). The results showed that the strain energies increased 20-33 times, respectively, as the thicknesses of facings increased from 1.50 to 2.76 mm with fixing the core thickness to constants (30-50 mm). On the other hand, these values showed a tendency of decrease as the core thickness increased regardless of thickness of facings. A set of basic data for the structural analysis could be provided by investigating the correlations, within the scope of this research, between the resisting moment and the thicknesses of core and facings.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.787-792
• /
• 2002

The voided slab have many advantages, light weight, high load-distribution capacity, low cost and beautiful appearance, etc. But they have also many cracks due to difficulties in designs and construction, analysis, shrinkage, installation and rising force of voided tube. This paper presents the retrofit effects with steel plate(SP)/carbon fiber sheet(CFS) of RC voided slab. As a results of this study, it proved that the strip pattern has to be profitable than full-face pattern in performance such as crack, ultimate loads, stiffness. Retrofit length has many influence on retrofit effects, as the length increases, performance and stability of end blocks higher. Also, it proved that the retrofit on full-section has to be profitable than voided-section in performance, and the overlay length of CFS is desirable to extent approximately and welding(V-cut) has to be efficient than anchors in SP connection. But the kinds of end block and anchor has not influence on retrofit effects.

• KCI Concrete Journal
• /
• v.14 no.1
• /
• pp.30-35
• /
• 2002

The fractal geometry is a non-Euclidean geometry which describes the naturally irregular or fragmented shapes, so that it can be applied to fracture behavior of materials to investigate the fracture process. Fractal curves have a characteristic that represents a self-similarity as an invariant based on the fractal dimension. This fractal geometry was applied to the crack growth of cementitious composites in order to correlate the fracture behavior to microstructures of cementitious composites. The purpose of this study was to find relationships between fractal dimensions and fracture energy. Fracture test was carried out in order to investigate the fracture behavior of plain and fiber reinforced cement composites. The load-CMOD curve and fracture energy of the beams were observed under the three point loading system. The crack profiles were obtained by the image processing system. Box counting method was used to determine the fractal dimension, D$_{f}$. It was known that the linear correlation exists between fractal dimension and fracture energy of the cement composites. The implications of the fractal nature for the crack growth behavior on the fracture energy, G$_{f}$ is apparent.ent.

• Journal of Nutrition and Health
• /
• v.30 no.1
• /
• pp.12-18
• /
• 1997

The effects of Artemisia princeps var orientalis(mugwort), Circium japonicum var ussuriense(Unggungqui) on serum lipid componets in rats was evaluated. Thirty rats divided into 5 experimental groups were fed with the diet containing 1% cholesterol, 0.25% sodium cholate, 10% coconut oil and 5% lard(control diet), supplemetned with 5% plant powder or its water soluble extract(experimental diet) for 4 weeks. Proximate analysis data and compositions of ash, dietary fiber and fatty acids in plants were presented. The concentrations of the total cholesterol was significantly lower in Ungungqui powder, Ungungqui extract and mugwort powder diet groups than the control. Serum HDL-cholesterol level was significantly higher in Unggunqui powder and Unggunqui extract diet group than the control. The concentration of LDL was significantly lower in Unggungqui power or extract diet group compared to the control. The values of VLDL and chylomicron were comparatively lower in Unggungqui power and mugwort powder diet group than in the other diet groups. The concentration of seum triglyceride and phospholipid was lower in Unggungqui powder diet group than in the control.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.10
• /
• pp.811-819
• /
• 2009

In the present study, deposition of discrete and small particles on a filter fiber was simulated by stochastic method. Trajectory of each particle was numerically solved by Langevin equation. And Lattice Boltzmann method (LBM) was used to solve flow field around the filter collector for considering complex shape of deposit layer. Interaction between the flow field and the deposit layer was obtained from a converged solution from an inner-loop calculation. Simulation method is properly validated with filtration theory and collection efficiency due to different filtration parameters are examined and discussed. Morphology of deposit layer and its evolution was visualized in terms of the particle size. The particle loaded effect on collection efficiency was also discussed.