• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권1호
• /
• pp.62-73
• /
• 2020

PAHs commonly found in industrial sites such as manufactured gas plants (MGP) are potentially toxic, mutagenic and carcinogenic, and thus require immediate remediation. In-situ chemical oxidation (ISCO) is known as a highly efficient technology for soil and groundwater remediation. Among the several types of oxidants utilized in ISCO, persulfate has gained significant attention in recent years. Peroxydisulfate ion (S₂O₈^2-) is a strong oxidant with very high redox potential (E⁰ = 2.01 V). When mixed with Fe²⁺, it is capable of forming the sulfate radical (SO₄^-·) that has an even higher redox potential (E⁰ = 2.6 V). In this study, the influence of various iron activators on the persulfate oxidation of PAHs in contaminated soils was investigated. Several iron sources such as ferrous sulfate (FeSO₄), ferrous sulfide (FeS) and zero-valent iron (Fe(0)) were tested as a persulfate activator. Acenaphthene (ANE), dibenzofuran (DBF) and fluorene (FLE) were selected as model compounds because they were the dominant PAHs found in the field-contaminated soil collected from a MGP site. Oxidation kinetics of these PAHs in an artificially contaminated soil and the PAH-contaminated field soil were investigated. For all soils, Fe(0) was the most effective iron activator. The maximum PAHs removal rate in Fe(0)-mediated reactions was 92.7% for ANE, 83.0% for FLE, and 59.3% for DBF in the artificially contaminated soil, while the removal rate of total PAHs was 72.7% in the field-contaminated soil. To promote the iron activator effect, the effects of hydroxylamine as a reducing agent on reduction of Fe³⁺ to Fe²⁺, and EDTA and pyrophosphate as chelating agents on iron stabilization in persulfate oxidation were also investigated. As hydroxylamine and chelating agents (EDTA, pyrophosphate) dosage increased, the individual PAH removal rate in the artificially contaminated soil and the total PAHs removal rate in the field-contaminated soil increased.

• 자원리싸이클링
• /
• 제16권6호
• /
• pp.3-9
• /
• 2007

생활 폐기물은 대부분 유리류와 자기류뿐만 아니라 많은 양의 iron을 함유하고 있으며 약 $3{\sim}11%$에 달한다. 대부분의 iron은 Ni-Fe와 Ni-Cr-Fe 같은 합금으로 존재하거나, 부식방지와 광택을 위해 Ni와 Cr로 도금된 iron으로 존재하고 있기 때문에 소각로에서 소각될 경우 철 재품 표면에 심하게 파손된 $Fe_3O_4$층과 함께 $NiFe_2O_4$와 FeCr_2O_4$을 형성하게 되어 바닥재에 존재하게 되어 중금속산화물 층을 형성시킬 수 있다. iron은 자력이 매우 강해 자력선별에 의해 쉽게 선별되며 이러한 효과로 인해 중금속 산화물의 선별까지 얻을 수 있다. 또한 바닥재는 다양한 Ni와 Cr 산화물들을 함유하고 있으며, Ni와 Cr은 강자성을 띈 물질이기 때문에 자력선별에 의해 큰 영향을 받을 수 있다. 따라서 자력선별에 따른 Ni와 Cr의 거동에 대해 조사하였으며 그 밖의 다른 중금속(Cu, Pb, Cd, As)들의 거동 또한 확인해 보았다. 그 결과 Ni와 Cr은 약 $45{\sim}50%$의 선별율을 보였으며, Cu와 Pb는 $15{\sim}20%$을 나타냈다. 또한 자력선별 전과 후의 바닥재에 대해 Ni와 Cr의 용출량을 확인해본 결과 자력선별 후 바닥재의 용출량이 더 낮음을 확인할 수 있었다.

• 소성∙가공
• /
• 제26권6호
• /
• pp.365-371
• /
• 2017

During sling wear of a ferrous metal, a surface layer is formed. Its microstructure, constituting phases, and mechanical property are different from those of the original wearing material. Since wear occurs at the layer, it is important to characterize the layer and understand how wear rate changes with different layers. Various layers are formed depending on external wear conditions such as load, sliding speed, counterpart material, and environmental conditions. In this research, sliding wear tests of pure iron were carried out against two different counterparts (AISI 52100 bearing steel and $Al_2O_3$) in the air and in an inert Ar gas atmosphere. Pure iron was employed to exclude other effects from secondary phases in steel on the wear. Wear tests were performed at room temperature. Worn surfaces, wear debris, and cross-sections were analyzed after the test. It was found that these two different counterparts and environments produced diverse layers, resulting in significant changes in wear rate. Against the bearing steel, pure iron showed higher wear rate in an Ar atmosphere due to severe adhesion than that in the air. On the contrary, the iron showed much higher wear rate in the air against $Al_2O_3$. Different layers and wear rates were analyzed and discussed by oxidation, severe plastic deformation, and adhesion at wearing surfaces.

• Journal of Nutrition and Health
• /
• 제31권8호
• /
• pp.1270-1282
• /
• 1998

The purpose of this research is to compare the effdct of the new weekly iron supplementation on maternal iron and zinc nutritional status with the effect of the present daily iron supplementation. To assess the iron ad zinc status of rpegant women visiting public health center in Ulsan, interview for dietary survey and general aspect of each subject was given and biochemical analysis of blood and urine was performed. The study subjects were divided to two groups randomly, but the subjects whose Hgb level was very low were allocated in daily group ethically because theeffect of weekly supplementation was not yet established as safety. Daily group received 80mg elemental Fe(250mg Fe as ferrous sulfate) per day for 100days, while weekly group received 160mg elemental Fe once a week for 15 weeks. After treatement, Hgb(p<0.01), Hct(p<0.01) , serum iron(p<0.05) and serum ferritin(p<0.001) in weekly group but RBC, Hgb , Hct , serum iron and serum iron and serum ferritin increased slightly. After correction for the initial Hgb by including it in the MANIVA, the difference in treatment effects of Hgb and TIBC between groups was statistically significant. The effect of weekly vs, daily iron supplementation program on zinc status was also studied. The difference in treatment effect between two groups was, however, not sifnificant. It is concluded that once weekly rion supplementation program in pregnant women was less effectgive to improve the iron status than daily iron supplementation program. However, because the weekly dose prevented a decline in Hgb as well as in ferritin, itw effect was positive , given the fact that non-supplemented women almost always exhibit a sifnificant drop in Hgb values. It seems that it will improve the iron status well if the amount or frequency of supplements is to be adjusted . Biweekly supplementation of a different dose or antother type of iron supplement, such as through a gastric delivery system, might be better.

• 자원리싸이클링
• /
• 제27권5호
• /
• pp.54-60
• /
• 2018

철 스크랩으로부터 제조되는 철강재의 품질은 재활용 스크랩 중의 미량원소에 의해 악영향을 받는다. 특히 철 스크랩 중의 Cu는 소량이라도 그 영향이 크기 때문에 주의하여야 하는 원소이다. 본 연구에서는 철 스크랩 중의 Cu를 염소가스에 의해 선택적으로 제거할 수 있는 가능성에 대해서 실험실적으로 검토하였다. Cu를 함유하는 모의 철 스크랩을 여러 가지 분위기의 염소가스와 반응시켰다. 실험결과 Cu는 염화되어 증발되었으나, Fe는 염소와 산소의 혼합가스 분위기에서는 표면만 산화되고 염화되지 않았다.

• Tribology and Lubricants
• /
• 제32권6호
• /
• pp.189-194
• /
• 2016

Wear debris in lubricating oil can be indicative of potential damage to mechanical parts in rotating and reciprocating machinery. Therefore, on-line or in-line monitoring of lubricating components in machinery is of great importance. This work presents a device based on inductive measurement of lubricating oil to detect magnetic wear particles in a tested volume. The circuit in the device consists of Maxwell Bridge and LVDT to measure inductance differences between pure and contaminated oil. The device detects the passage of ferrous particles by monitoring inductance change in a coil. The sensing principle is initially demonstrated at the microscale using a solenoid. The device is then tested using iron particles ranging from $50{\mu}m$ to $100{\mu}m$, which are often found in severely worn mechanical components. The test results show that the device is capable of detecting and distinguishing ferrous particles in lubricating oil. The design concept demonstrated here can be extended to an in-line monitoring device for real-time monitoring of ferrous debris particles. A simulation using the CST code is performed to better understand the inductive response in the presence of magnetic bodies in the oil. The CST simulation further verifies the effectiveness of inductance measurement for monitoring magnetic particles within a tube.

• Bulletin of the Korean Chemical Society
• /
• 제18권6호
• /
• pp.644-648
• /
• 1997

Introduction of an alkyl substituent at the $C_{4\beta}$ position of antimalarial trioxanes has caused them to become more active in their antimalarial activity. We have designed a structurally simple 4β-phenyl substituted trioxane (3) as an active antimalarial since it can form a more stable carbon radical when reacting with ferrous bromide. The trioxane 3 has been prepared along with the corresponding isomer 4 according to the previously reported procedure. The synthesized trioxanes 3 and 4 were finally separated by using HPLC and assigned their stereochemistry by spectroscopy and X-ray crystallography. Their antimalarial activities were surprisingly low. The low activity was then rationalized based on the product distribution of the ferrous ion induced reaction of these trioxanes. These trioxanes with ferrous bromide did not produce any detectable amount of the corresponding $C_4$-hydroxylated product, consistent with the fact that neither $C_{4\beta}$-phenyl substituted nor $C_{4\alpha}$-phenyl substituted trioxane has any antimalarial activity. It implies that a $C_4$ substituent of antimalarial trioxanes has to stabilize an adjacent carbon-centered radical in a specific stability range in order to show a good antimalarial activity. This study, combined with related studies, could help develop more potent antimalarial trioxanes.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.951-954
• /
• 2000

This paper presents a new cutting method, i.e. diamond cutting, aided by electrolysis, in order to cut ferrous materials with diamond tools. Diamond cutting is widely applied in manufacturing ultraprecision parts such as magnetic disk, polygon mirror, spherical/non-spherical mirror and copier drum, etc. because of the diamond tool edge sharpness. In general, however, diamond cutting cannot be applied to cutting steels, because diamond tools wear excessively in cutting iron based materials like steel due to their high chemical interaction with iron in high temperature. In order to suppress the diffusion of carbon from the diamond tool and to reduce increase of cutting force due to size effect, we attempt to change chemically the compositions of iron based materials using electrolysis in a limited part which will be soon cut. Through experiments under several micro-machining and electrolysis conditions, cutting using electrolysis, compared to conventional cutting, was found to result in a great decrease of the cutting force, a better surface and much less wear tool.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.688-691
• /
• 2000

Ferritin, an iron-storage protein, is found in bacteria and some animal tissues such as liver, spleen, and bone marrow. It is more effective and causes less side reactions than the traditional ferrous sulfate, and thus has been used primarily to treat iron deficiency in pregnancy anaemia. Currently, the ferritin extracted from the bovine and equine spleens are sold as a commercial product. Its market is estimated as several hundreds of million US dollars. However, because of the recent warnings against the viral diseases of animal origins such as mad cow disease, a safer ferritin is sought after. Our research team has successfully developed a production process for recombinant human ferritin. Its expression titer from yeast is high enough to be economically viable, and its particle formation characteristics are as effective as well.

• 한국전기전자재료학회논문지
• /
• 제19권1호
• /
• pp.58-63
• /
• 2006

In this Paper, ZnO films mixed with iron oxide were prepared by an ultrasonic spray pyrolysis method. The chemical composition and structural properties as a function of the Fe atomic ratio in the deposition solution were studied. Zinc acetate and ferrous chloride were used as precursors of Zn and Fe, respectively. Fe atomic ratio to Zn varied from 0.15 to 10.0. Substrate temperature was fixed at $250^{\circ}C$. The crystallographic properties and surface morphologies of the films were studied by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. Electron probe X-ray microanalysis (EPMA) and X-ray photoelectron spectroscopy (XPS) were carried out to analyse the chemical composition and state of Zn and Fe atoms.