• Title/Summary/Keyword: ferrous ion

Search Result 169, Processing Time 0.029 seconds

Studies on the Polarographic Kinetic Currents for the First Order Reactions at the Droping Mercury Electrode (水銀滴下電極에서 一次反應에 對한 포라로그라프電流에 關한 硏究)

  • Kim, Hwang-Am;Chin, Chang-Hee
    • Journal of the Korean Chemical Society
    • /
    • v.6 no.1
    • /
    • pp.14-18
    • /
    • 1962
  • Solution to the diffusion layer for the first order reaction at a droping mercury electrode (D.M.E.) is presented. Equations are derived for polarographic currents for the reactions at the D.M.E. A factor which is applicable to the D.M.E. is derived, when we use the equations of the polarographic currents for the reactions at a plane electrode(P.E.), and the rate constants of the backward reactions are negligibly small. Polarographic currents from a combination of diffusions and reactions are obtained at the D.M.E. with special approximation. Rate constant for the reaction of ferrous ion with hydrogen-peroxide is determined at the D.M.E.,using the data of Kolthoff and Perry. The agreement of the equation with the data of Kolthoff and Perry for the kinetic current of ferric ion in the presence of hydrogen-peroxide is good. Ratios of diffusion layer at the D.M.E. to the diffusion layer at the P.E. are discussed and show that, when the rate constants of the backward reactions for the first order reactions are larger than 1/0.05 sec-1. and drop-time about 3 sec., these ratioes are about one.

  • PDF

Spectral Characteristics of Hydrothermal Alteration in Zuru, NW Nigeria

  • Aisabokhae, Joseph;Tampul, Hamman
    • Korean Journal of Remote Sensing
    • /
    • v.35 no.4
    • /
    • pp.535-544
    • /
    • 2019
  • This study demonstrated the ability of a Landsat-8 OLI multispectral data to identify and delineate hydrothermal alteration zones around auriferous prospects within the crystalline basement, North-western Nigeria. Remote sensing techniques have been widely used in lithological, structural discrimination and alteration rock delineation, and in general geological studies. Several artisanal mining activities for gold deposit occur in the surrounding areas within the basement complex and the search for new possible mineralized zones have heightened in recent times. Systematic Landsat-8 OLI data processing methods such as colour composite, band ratio and minimum noise fraction were used in this study. Colour composite of band 4, 3 and 2 was displayed in Red-Green-Blue colour image to distinguish lithologies. Band ratio ${\frac{4}{2}}$ image displayed in red was used to highlight ferric-ion bearing minerals(hematite, goethite, jarosite) associated with hydrothermal alteration, band ratio ${\frac{5}{6}}$ image displayed in green was used to highlight ferrous-ion bearing minerals such as olivine, amphibole and pyroxenes, while ratio ${\frac{6}{7}}$ image displayed in blue was used to highlight clay minerals, micas, talc-carbonates, etc. Band rationing helped to reduce the topographic illumination effect within images. The result of this study showed the distribution of the lithological units and the hydrothermal alteration zone which can be further prospected for mineral reserves.

Removal of Methyl tert-Butyl Ether (MTBE) by Modified Fenton Process for in-situ Remediation (Methyl tert-Butyl Ether(MTBE)의 in-situ Remediation을 위한 Modified Fenton Process에 관한 연구)

  • Chung, Young-Wook;Seo, Seung-Won;Kim, Min-Kyoung;Lee, Jong-Yeol;Kong, Sung-Ho
    • Journal of Soil and Groundwater Environment
    • /
    • v.12 no.2
    • /
    • pp.27-36
    • /
    • 2007
  • A recent study showed that MTBE can be degraded by Fenton's Reagent (FR). The treatment of MTBE with FR, however, has a definite limitation of extremely low pH requirement (optimum pH $3{\sim}4$) that makes the process impracticable under neutral pH condition on which the ferrous ion precipitate forming salt with hydroxyl anion, which result in the diminishment of the Fenton reaction and incompatible with biological treatment. Consequently, this process using only FR is not suitable for in-situ remediation of MTBE. In order to overcome this limitation, modified Fenton process using NTA, oxalate, and acetate as chelating reagents was introduced into this study. Modified Fenton reaction, available at near neutral pH, has been researched for the purpose of obtaining high performance of oxidation efficiency with stabilized ferrous or ferric ion by chelating agent. In the MTBE degradation experiment with modified Fenton reaction, it was observed that this reaction was influenced by some factors such as concentrations of ferric ion, hydrogen peroxide, and each chelating agent and pH. Six potential chelators including oxalate, succinate, acetate, citrate, NTA, and EDTA were tested to identify an appropriate chelator. Among them, oxalate, acetate, and NTA were selected based on their remediation efficiency and biodegradability of each chelator. Using NTA, the best result was obtained, showing more than 99.9% of MTBE degradation after 30 min at pH 7; the initial concentration of hydrogen peroxide, NTA, and ferric ion were 1470 mM, 6 mM, and 2 mM, respectively. Under the same experimental condition, the removal of MTBE using oxalate and acetate were 91.3% and 75.8%, respectively. Optimum concentration of iron ion were 3 mM using oxalate which showed the greatest removal efficiency. In case of acetate, $[MTBE]_0$ decreased gradually when concentration of iron ion increased above 5 mM. In this research, it was showed that modified Fenton reaction is proper for in-situ remediation of MTBE with great efficiency and the application of chelatimg agents, such as NTA, was able to make the ferric ion stable even at near neutral pH. In consequence, the outcomes of this study clearly showed that the modified Fenton process successfully coped with the limitation of the low pH requirement. Furthermore, the introduction of low molecular weight organic acids makes the process more available since these compounds have distinguishable biodegradability and it may be able to use natural iron mineral as catalyst for in situ remediation, so as to produce hydroxyl radical without the additional injection of ferric ion.

Studies on the Production of Enzymes by Thermophilic Actinomycetes (PART II) Some Properties of $\alpha$-Amylase from Thermophilic Actinomycetes (고온성 방선균에 의한 순소생산에 관한 연구 (제2보) $\alpha$-Amylase의 효소학적 성질)

  • Yang, Han-Chul;Park, Yong-Jin;Cho, Hong-Yeon
    • Microbiology and Biotechnology Letters
    • /
    • v.4 no.3
    • /
    • pp.91-97
    • /
    • 1976
  • During the course of studies on the production and utilization of thermostable ${\alpha}$-amylase from a thormophilic actinomycete species isolated from soil, partial characterization of the ${\alpha}$-amylase has been (arried out. The optimum pH for the dextrinogenic activity of the enzyme was found to be 6.5 and the maximum reaction rate was achieved at a temperature range of 55$^{\circ}$ to 65$^{\circ}C$. Calcium ion was recognized to have a slight effect in activating the enzyme, while heavy metal salts especially ferrous and cupric ions showed a remarkable inhibition effect. The enzyme was best protected iron thermal denaturation at pH 8.0 with tris-HCI buffer;inactivation was rapid at higher or lower pH values. Furthermore, its thermal stability was greatly increased by calcium ion, particulary at the final concentration of 1${\times}$10$\^$-2/ mole in the reaction mixture. The Km value for the ${\alpha}$-amylase was calculated to be 2.17${\times}$10$\^$-4/g per $m\ell$ and the energy of activation for the dextrinogenic reaction to be 12,000${\pm}$580 ㎈ per mole.

  • PDF

Degraded Paddy Soils. I. Theoretical Analysis on the Sultide Formation and the Effect of Iron Hydroxide Upon Removal of Sulfide from Solution

  • Cho, Chai-Moo
    • Applied Biological Chemistry
    • /
    • v.2
    • /
    • pp.9-14
    • /
    • 1961
  • The formation of sulfide from sulfate has been discussed from the thermodynamic principles. No mechanism of the reaction has been presented. From the stoichiometric and Nernst equations for the conversion of sulfate into sulfide, it was concluded that the formation of sulfide from sulfate can take place more readily if pH of a medium is low. The difficulty of this conversion increases with increasing pH. As pH of a medium increases, the degree of dissociation of H₂S into S= increases and this, in turn, renders the chance of precipitation of sulfide as FeS easier. Higher the pH of a soil or medium, greater is the S= concentration. The concentration of ferrous ion required to remove dissolved sulfide in a medium by forming insoluble FeS decreases with increasing pH. From the theory it was pointed out that an application of lime and iron rich foreign substances to a soil may be effective in causing the removal of dissolved sulfide from solution.

  • PDF

Effects of Iron-Reducing Bacteria on Carbon Steel Corrosion Induced by Thermophilic Sulfate-Reducing Consortia

  • Valencia-Cantero, Eduardo;Pena-Cabriales, Juan Jose
    • Journal of Microbiology and Biotechnology
    • /
    • v.24 no.2
    • /
    • pp.280-286
    • /
    • 2014
  • Four thermophilic bacterial species, including the iron-reducing bacterium Geobacillus sp. G2 and the sulfate-reducing bacterium Desulfotomaculum sp. SRB-M, were employed to integrate a bacterial consortium. A second consortium was integrated with the same bacteria, except for Geobacillus sp. G2. Carbon steel coupons were subjected to batch cultures of both consortia. The corrosion induced by the complete consortium was 10 times higher than that induced by the second consortium, and the ferrous ion concentration was consistently higher in iron-reducing consortia. Scanning electronic microscopy analysis of the carbon steel surface showed mineral films colonized by bacteria. The complete consortium caused profuse fracturing of the mineral film, whereas the non-iron-reducing consortium did not generate fractures. These data show that the iron-reducing activity of Geobacillus sp. G2 promotes fracturing of mineral films, thereby increasing steel corrosion.

Investigation of n-Butanol and Ethyl Acetate Extracts from Thermal Treatment Yam (Dioscorea batatas DECNE.) for their Antioxidant Activities

  • Duan, Yishan;Kim, Gyeong-Hwuii;Kim, Han-Soo
    • Journal of the Korean Applied Science and Technology
    • /
    • v.32 no.3
    • /
    • pp.363-371
    • /
    • 2015
  • n-Butanol and ethyl acetate extracts of thermal treatment yam (Dioscorea batatas $D_{ECNE.}$) belonging to the family Dioscoreaceae were measured for their radical scavenging activity and lipid peroxidation inhibition ability. In this study, ethyl acetate extract showed the most potent antioxidant activity evaluated by ferrous ion chelating activity and NO radical scavenging activity. Nevertheless, n-butanol extract was more effective in inhibiting linoleic acid peroxidation. A significant difference between n-butanol extract and ethyl acetate extract in nitrite scavenging activity ${\beta}$-carotene bleaching assays could not be found. Also, the results of this study showed that thermal treatment yam could be used as easily accessible source of natural antioxidants and as a possible food supplement.

Kinetics of $Fe^{2+}$ Oxidation by Acidithiobacillus ferrooxidans Using Total Organic Carbon Measurement

  • Lom, In-Soo;Jang, Hyun-Young;Lee, Jong-Un
    • Journal of Microbiology and Biotechnology
    • /
    • v.12 no.2
    • /
    • pp.268-272
    • /
    • 2002
  • Kinetic experiments on the biological oxidation of $Fe^{2+}$ by Acidithiobacillus ferrooxidans were conducted by measuring the total organic carbon content. The total organic carbon in the solution was determined with different initial concentrations of $Fe^{2+}$(4, 9, 15, and 20 mg/ml). The growth of At. ferrooxidans and substrate utilization were described by the Monod expression. The total organic carbon was found to be an indicator of the biomass concentration and thus may be effectively utilized for estimating cell growth rates in kinetic model development.

Recovery of Pure Electrolytic Iron from Wasted Hydrochloric Pickling Solution of Steel (철강의 염산산세 폐액으로부터 전해철의 제조에 관한 연구)

  • 김기호;권오익;홍성규
    • Journal of Surface Science and Engineering
    • /
    • v.26 no.1
    • /
    • pp.23-30
    • /
    • 1993
  • Iron component in wasted hydrochloric etching solutions from steel works were recovered by electrolysis. The electric conductances of the solutions, as the function of the bath temperature and the ferrousion concen-tration, were measured and the result of the original solution was K=(0.0012+0.0005$\times$10-3T-0.1160$\times$10-6T2)$\times$102S.m-1(T in $^{\circ}C$) The current efficiency was better for the bath using a soluble steel plate anode than for the bath using an insoluble platinized titanium one. Densed electrolytic iron having the purity of higher than 99.99% was ob-tained at the electrolysis conditions of the cathodic current density of 15A/dm2, the bath temperature of $70\pm$$5^{\circ}C$ and the ferrous ion concentration of about 100g/l. The morphologies of the deposited iron were observed by SEM.

  • PDF

Influence of pH on the Antioxidant Activity of Melanoidins Formed from Different Model Systems of Sugar/Lysine Enantiomers

  • Kim, Ji-Sang;Lee, Young-Soon
    • Food Science and Biotechnology
    • /
    • v.17 no.6
    • /
    • pp.1310-1315
    • /
    • 2008
  • This study was to investigate the influence of pH on the antioxidant activity of melanoidins formed from glucose (Glc) and fructose (Fru) with lysine enantiomers in the Maillard reaction. Melanoidins formed from D-isomers were found to be effective antioxidants in different in vitro assays with regard to the ferrous ion chelating activity, 1, l-diphenyl-2-picryl-hydrazil (DPPH) radical scavenging activities, ferric reducing/antioxidant power (FRAP), and 2,2'-azinobis(3-ethylbenothiazoline-6-sulfonic acid) diammonium salt (ABTS) radical scavenging activity. In particular, the chelating activity of these melanoidins at a pH of 7.0 was greater than those with pH of 4.0 and 10.0. The chelating activity and DPPH radical scavenging activity of the melanoidins formed from the Glc systems were higher than those of the melanoidins formed from the Fru systems. However, the FRAP and ABTS radical scavenging activity of these melanoidins were not different according to pH level, with exceptions being the Fru systems.