펄스 마그네트론 스퍼터링법을 이용하여 Co농도 변화에 따라 유리 기판 위에 ZnJ-xcoxo 박막을 제조하였다. Co 농도의 증가에 따라 $Zn_{1-x}Co_{x}O$ 박막의 c축 결정 배향성은 향상되었다. 표면 형상 분석을 통하여 매우 치밀한 박막이 성장되었음을 찰 수 있었다. 박막의 UV-visible투과율 측정 결과, $Co^{2+}$ 이온에 의한 sp-d상호교환 작용과 d-d 천이를 확인할 수 있었다. $Zn_{1-x}Co_{x}O$ 박막의 비저항은 $10^{-2}\~10^{-3}\;\Omega{\cdot}cm$의 값을 가지며 Co농도의 증가에 따라 박막의 비저항은 증가하였고, 특히 $30\;at\%$ Co에서는 박막의 결정성 저하로 인하여 급격한 비저항 증가가 발생하였다. X-ray photoelecoon specooscopy분석을 통해 Co와 O 간의 결합 상태를 확인하였으며, alternating gradient magnetometer측정 결과 $Zn_{1-x}Co_{x}O$ 박막의 상온 강자성 치력 현상을 관찰할 수 있었다. 낮은 비저항 및 상온 강자성 이력 특성을 갖는 $Zn_{1-x}Co_{x}O$ 박막은 자성 반도체 소자로의 응용 가능성을 나타내었다 .
Zn$_{l-x}$Co$_{x}$O (x = 0.05 - 0.20) films were grown on Coming 7059 glass by sol-gel process. A homogeneous and stable Zn$_{l-x}$Co$_{x}$O sol was prepared by dissolving zinc acetate dihydrate (Zn(CH$_{3}$COO)$_{2}$$\cdot$2H$_{2}$O), cobalt acetate tetrahydrate ((CH$_{3}$)$_{2}$$\cdot$CHOH) and aluminium chloride hexahydrate (AlCl$_{3}$$\cdot$ 6H$_{2}$O) as solute in solution of isopropanol ((CH$_{3}$)$_{2}$$\cdot$CHOH) and monoethanolamine (MEA:H$_{2}$NCH$_{2}$CH$_{2}$OH). The films grown by spin coating method were postheated in air at 650°C for 1 h and annealed in the condition of vacuum (5 $\times$ 10$^{-6}$ Torr) at 300$^{\circ}C$ for 30 min and investigated the nature of c-axis preferred orientation and physical properties with different Co concentrations. Znl_xCOxO thin films with different Co concentrations were well oriented along the c-axis, but especially a highly c-axis oriented Zn$_{l-x}$Co$_{x}$O thin film was grown at 10 at$\%$ Co concentration. The transmittance spectra showed that Zn$_{l-x}$Co$_{x}$O thin films occur typical d-d transitions and sp-d exchange interaction became activated with increasing Co concentration. The electrical resistivity of the films at 10 at$\%$ Co had the lowest value due to the highest c-axis orientation. X-ray photoelectron spectroscopy and alternating gradient magnetometer analyses indicated that no Co metal cluster was formed, and the ferromagnetic properties appeared, respectively. The characteristics of the electrical resistivity and room temperature ferromagnetism of Zn$_{l-x}$Co$_{x}$O thin films suggested the possibility for the application to dilute magnetic semiconductors.
Ru-Co가 복합 치환된 M-type Ba-ferrite($BaFe_{12-2x}Ru_xCo_xO_{19}$)의 치환량 x의 변화에 따른 자기적 특성과 전파흡수 특성에 관해 조사하였다. 기존의 Ti-Co를 치환시킨 경우보다 적은 양의 치환(x=0.3)으로 면내 자기이방성을 보이는 낮은 보자력($H_c$)과 높은 포화자화($M_s$) 값을 얻을 수 있었다. 따라서 Ru-Co 치환량 조절에 의해 GHz 대역에서 자연공명주파수의 조절이 가능하였다. 소결체 및 복합체에서 흡수 주파수 대역은 보자력이 증가할수록 고주파 대역으로 이동한다. 복합체에서 페라이트 혼합량이 증가함에 따라 복소투자율과 복소유전율의 값이 증가하기 때문에 정합주파수는 저주파 대역으로 이동한다. 이러한 특성들을 이용하여 순수한 M-형 육방정 페라이트에 Ru-Co의 치환량, 복합체에서 페라이트 분말의 혼합량, 그리고 흡수체의 두께의 제어를 통하여 GHz 주파수 대역에서 양호한 전자파 흡수체, 노이즈 감쇠재의 제조가 가능함을 제시할 수 있다.
Using high magnetic flux from a 60 Hz high-current cable, a 2 W wireless-powered energy harvesting receiver for sensor operation, internet of things (IoT) devices, and LED lights inside electrical cable tunnels is proposed. The proposed receiver comprises a copper coil with a high number of turns, a ring-shaped ferromagnetic core, a capacitor for compensating for the impedance of the coil in series, and a rectifier with various types of loads, such as sensors, IoT devices, and LEDs. To achieve safe and easy installation around the power cable, the proposed ring-shaped receiver is designed to easily open or close using a clothespin-shaped handle, which is made of highly-insulated plastic. Laminated silicon steel plates are assembled and used as the core because of their mechanical robustness and high saturation flux density characteristic, in which the thickness of each isolated plate is 0.3 mm. The series-connected resonant capacitor, which is appropriate for low-voltage applications, is used together with the proposed receiver coil. The concept of the figure of merit, which is the product weight and cost of both the silicon steel plate and the copper wire, is used for an optimized design; therefore, the weight of the fabricated receiver and the price of raw material is 750 gf and USD $2 each, respectively. The 2.2 W powering capability of the fabricated receiver was experimentally verified with a power cable current of $100A_{rms}$ at 60Hz.
강자성체를 정밀해석하기 위해서는 포화자화 현상과 히스테리시스 현상을 모두 고려해 주어야만 한다. Preisach 모델링은 변화율이 심한 히스테리시스 현상을 매우 잘 표현해 낼 수 있는 수치모사 방법이다. 하지만 정자기 유한요소법과 Preisach 모델링을 사용한 자화해석 반복 과정에서 수렴성이 떨어진다는 큰 문제점을 가지고 있다. 특히 자화율의 기울기가 급격히 변화할 경우 수렴에 많은 문제점을 가지고 있다. 이러한 문제점은 일반적인 M-H 변수를 사용하지 않고, M-B 변수를 사용하면 해결할 수 있다. 본 논문에서는 일반적인 M-H를 이용한 Preisach 모델링의 평면 분포로부터 M-H 변수를 M-B 변수화 시키는 방법을 제안하고 있고, 2차원 정자기 유한요소법과 M-H, M-B 변수를 이용한 Preisach 모델링을 비교 분석하여 Preisach 모델링의 수렴성 문제를 해결하는 방법에 대해 기술하였다.
스파터링법으로 Si(001) 기판 위에 증착된 Fe(1000 $\AA$)/Al2O3(t$\AA$)/Co(1000$\AA$) 자기 삼층 접합들의 터널링 자기저항 성질을 연구하였다. 두께 t=50~200$\AA$의 Al2O3층을 반응성 rf 스파터링법으로 바닥 자성층위에 직접 증착하였다. 비교응 위해, Pt/Al2O3/Pt 터널링 접합을 제조하여 상온에서 전류.전압(I.V)특성을 측정한 결과, 확인한 비선형 nonmhic 거동을 나타내었다. 이로부터 반응성 스파터링된 Al2O3가 상온에서도 phnhole이 없는 휼룔한 절연 터널링 장벽을 형성함을 확인할 수 있었다. Fe/Al2O3/Co 자기 터널링 접합즐은 Pt/Al2O3/Pt 접합들에 비해 상당한 접합저항의 열화를 보였으며, 상온에서 대략 0.1%의 터널링 자기저항비를 나타내었다. Fe를 꼭대기 전극으로 하는 전극으로 하는 접합들에 비해, Co을 꼭대기 전극으로 하는 대부분의 자기 터널링 접합들이 보다 안정된 I.V 및 터널링 자기저항 특성을 보였다. 이러한 실험결과들을 자기 터널링 접합들의 계면구조와 관련지어,Pt/Al2O3/Ptwjq합과 비교하여 논의하였다.
사회적 관심이 되고 있는 전력선과 휴대폰의 전자파 영향에 의한 인체 유해성 문제에 대한 상대적 개념으로 암 치료에 있어서 보조요법의 일환으로 제시될 수 있는 전자파를 이용한 온열치료법 개발을 위한 기초연구로서 고분자계의 젤리팬텀을 제작하였다. 폴리에틸렌을 비롯한 다양한 구성비를 가지는 팬텀 재료의 조합을 통해 CDMA와 PCS 대역에 적용되는 인체 두뇌의 젤리팬텀을 제작한 후 전기적 특성을 분석하였다. 본 연구는 향후 제조된 젤리팬텀을 비롯한 각종 장기의 모의인체에 대한 전기적 특성 값을 분석한 다음, 자성유체를 젤리팬텀에 주입시킨 후 실제 온도상승을 온도감지 적외선 카메라로 촬영하여 확인, 젤리팬텀의 전자기적 특성 분석을 통한 암 치료에 있어서의 새로운 방법론을 제시할 수 있을 것으로 기대된다.
Molecular-Beam Epitaxy 방법으로 합성된 MnAs 박막의 물리적 특성을 기판의 종류와 증착 온도에 따라 조사하였으며 더불어 이들 시료의 증착 후 열처리 효과를 조사하였다. 증착 온도가 $600^{\circ}C$일 경우에는 기판의 종류에 관계없이 type-B의 결정 방향성을 보였으나 $200^{\circ}C$ 이하에서 합성한 시료에 대하여는 type-A로 합성되었다. $600^{\circ}C$에서 GaAs(001) 기판에 성장시킨 시료에서는 자기화 용이축 내에서도 특히 한쪽 방향으로 자화가 되어 있음을 확인하였다. 강자성을 보이지 않던 $120^{\circ}C$에서 증착한 MnAs/Si(001)와 실온에서 강자성과 상자성이 공존하였던 $200^{\circ}C$에서 증착한 MnAs/GaAs(001) 시료의 경우 $600^{\circ}C$에서 열처리 하였을때 자기적 특성이 크게 향상되었다.
본 연구에서는 대표적인 강자성 금속인 Fe에 비자성 원소가 치환된 비교적 단순한 B2 구조의 FeX(X = Al, Si, Ni, Ga, Ge, Sn) 합금의 자기변형계수를 제일원리계산으로 수행하여 Fe 기반 합금이 희토류 원소 기반 자기변형 물질인 Terfenol을 대체할 수 있는 가능성을 탐색하였다. 계산방법으로 자성 연구에 가장 적합한 것으로 알려져 있는 총퍼텐셜 선형보강 평면파(Full-potential Linearized Augmented Plane Wave; FLAPW) 방법을 사용하였으며 일반화 물매근사(generalized gradient approximation: GGA)을 도입하여 전자 상호간의 교환-상관 퍼텐셜을 기술하였다. B2 구조의 FeX(X = Al, Si, Ni, Ga, Ge, Sn)의 합금들 중에 FeSi와 FeGe은 비자성 상태가, 그 외 나머지 합금은 강자성 상태가 안정된 것으로 계산되었다. FeAl, FeNi, FeGa, FeSn의 자기변형계수 는 각각 -5, +6, -84, -522ppm으로 계산되어 FeSn은 큰 자기변형을 가질 수도 있음을 예측하였다.
Magnetic fluid, a new type of magnetic material, is a colloidal liquid constituted of nano-scale ferromagnetic particles suspended in carrier fluid. Magnetic fluid sealing is one of the most successful applications of magnetic fluid. As a new type of seal offering the advantages of no leakage, long life and high reliability, the magnetic fluid seal has been widely utilized under vacuum- and low-pressure-differential conditions. In practical applications, for improved pressure capacity, a multistage sealing structure is always used. However, in engineering applications, a uniform distribution of magnetic fluid under each tooth often cannot be achieved, which problem weakens the overall pressure capacity of the seals. In order to improve the pressure capacity of magnetic fluid seals and broaden their applications, the present study theoretically and experimentally analyzed the degree of non-uniform distribution of multistage magnetic fluid seals. A mathematical model reflecting the relationship between the pressure capacity and the distribution of magnetic fluid under a single tooth was constructed, and a formula showing the relationship between the volume of magnetic fluid and its contact width with the shaft was derived. Furthermore, the relationship of magnetic fluid volume to capacity was analyzed. Thereby, the causes of non-uniform distribution could be verified: injection of magnetic fluid; the assembly of magnetic fluid seals; the change of magnetic fluid silhouette under pressure loading; the magnetic fluid sealing mechanism of pressure transmission, and seal failure. In consideration of these causes, methods to improve the pressure capacity of magnetic fluid seals was devised (and is herein proposed).
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.