This study was carried out to investigate the effects of moisture content, temperature, C/N ratio and pH of the sewage sludge mixed with hulle and sawdusts for making compost under aerobic condition and to improve the defect of the structure of experimental equipment heat lose and handling method. and obtained results were as follows 1.The temperature was reached 73$^{\circ}$ C around 50 hours fermentation in the condition of 0.8 L/min. of air and 60.4% of moisture content. and favorable moisture content of initial condition ranged from 50 to 65% 2.The temperature near bottom of the batch composter was decreased due to evaporate water vapor and lose the heat produced during aeration. and it is required to be improved. 3.The temperature in the batch composter from the center to the inside wall surface was gradually decreased. the temperatures of the points located in r=9cm and the wall surface were 4$^{\circ}$ C and 6$^{\circ}$ C respectively. and therefore it is required to be insulated. 4. The maximum C02 production was obtained as 7.3% per volume in the temperature of 63$^{\circ}$C at the moisture content of 60% 5.The temperature range of active microbes growth was found to be as 20$^{\circ}$C to 40$^{\circ}$C in the case of mesophiles and 50$^{\circ}$C to 65$^{\circ}$C in the case of thermophiles due to increase and decrease C02 production. 6.C/N ratio after decomposition was 1.3 to 2.6 smaller than that of initial one due to increase the amount of nitrogen. The more C/N ratio increased. the less the reaction velocity decresed. The optimum of it as found to be 30. 7.pH values after decomposition were slightly increased than that of initial ones. The reaction velocity was decreased at acid and alkall condition. Therefore it is neseseary to neutralize the medium to improve the reaction.
Among various pretreatment processes for bioethanol production, extrusion pretreatment, one of cheap and simple process was investigated to efficiently produce fermentable sugars from micro alga, Chlorella sp. The biomass was pretreated in a single screw extruder at five different barrel temperatures of 45, 50, 55, 60 and $65^{\circ}C$, respectively with five screw rotation speed of 10, 50, 100, 150 and 200 rpm. The pretreated biomass was reacted with two different hydrolyzing enzymes of cellulase and amyloglucosidase since the biomass contained different types of carbohydrates, compared to cellulose of agricultural by-products such wheat and corn stovers, etc. In general, higher glucose conversion yield was obtained as 13.24 (%, w/w) at $55^{\circ}C$ of barrel temperature and 100 rpm of screw speed conditions. In treating 5 FPU/glucan of cellulase and 150 Unit/mL of amyloglucosidase, ca. 64% of cellulose and 40% of polysaccharides in the micro alga were converted into glucose, which was higher yields than those from other reported data without applying an extrusion process. 84% of the fermentable sugars obtained from the hyrolyzing processes were fermented into ethanol in considering 50% of theoretical maximum fermentation yield of the yeast. These results implied that high speed extrusion could be suitable as a pretreatment process for the production of bioethanol from Chlorella sp.
Pretreatment of cellulosic biomass is necessary before enzymatic saccharification and fermentation. Extrusion is a well established process in food industries and it can be used as a physicochemical treatment method for cellulosic biomass. Aqueous ammonia soaking treatment at mild temperatures ranging from 60 to $80^{\circ}C$ for longer reaction times has been used to preserve most of the cellulose and hemicellulose in the biomass. The objective of this study was to evaluate the effect of extrusion treatment on aqueous ammonia soaking method. Extrusion was performed with miscanthus sample conditioned to 2mm of particle size and 20% of moisture content at $200^{\circ}C$ of barrel temperature and 175rpm of screw speed. And then aqueous ammonia soaking was performed with 15%(w/w) ammonia solution at $60^{\circ}C$ for 1, 2, 4, 8, 12 hours on the extruded and raw miscanthus samples respectively. In the combined extrusion-soaking treatment, most compositions removal occurred within 1~2 hours and on a basis of 1 hour soaking treatment values, cellulose was recovered about 85% and other compositions, including hemicellulose, are removed about 50% from extruded miscanthus sample. The combined extrusion-soaking treated and soaking only treated samples were subjected to enzymatic hydrolysis using cellulase and ${\beta}$-glucosidase. The enzymatic digestibility value of combined extrusion-2 hours soaking treated sample was comparable to 12 hours soaking only treated sample. It means that extrusion treatment can shorten the conventional long reaction time of aqueous ammonia soaking. The findings suggest that the combination of extrusion and soaking is a promising pretreatment method to solve both problems for no lignin removal of extrusion and long reaction time of aqueous ammonia soaking.
This study examined Jeung-pyun(JP) Retrogradation in samples containing 3% whole protein, 7S protein, or 11S protein(w/w) that were stored at $4^{\circ}C$ for 6, 12, 24 and 72 hr. Rheometery and differential scanning calorimetry(DSC) were used in the analysis. The pH of the dough decreased during the fermentation process, but it increased after steaming. The JP prepared with soybean protein isolate(SPI) had higher pH than the control group. During storage the textural characteristics of the JP showed effects according to the additions of SPI. After 6 hr of storage, the JP samples containing soybean flour, whole protein, 7S protein, and 11S protein had lower hardness valuse. From 4 hr to 12 hr, higher springiness values were found in the samples containing whole protein, 7S protein and 11S protein. At 0 hr, the control group had the highest cohesiveness value, but after 24 hr it presented the lowest value. For gumminess, after 6 hr of storage, the control group offered the lowest value. Whereas after 12 hr of storage the whole protein group showed the highest value, and at 24 hr, the whole protein, 7S protein, and 11S protein groups had higher values. According to the DSC results, the 11S protein group had lower enthalpy values(${\bigtriangleup}H$) suggesting that adding 11S protein to JP might improve starch retrogradation. After 72 hr of storage, the control group had the highest onset temperature($T_{o}$) and peak temperature($T_{p}$) whereas the 7S and 11S protein JP samples had higher conclusion temperatures($T_{c}$). Therefore, based on the different analysis result between the control and treatment groups, the addition of SPI to Jp had effects on retrogradation.
비동결 파운드 케이크의 배합비를 반응표면분석법에 의해 여러 가지 동결방지제의 함량을 조절하여 결정하였다. 수분함량만이 동결방지제 함량과 선형관계를 나타내었으나, 다른 반응변수들은 quadratic모형으로 나타났다. 비동결 파운드 케이크에 제조시 함유되는 당류의 최적 배합비는 7736 : 0.0 : 20.4, 60.0 : 32.8 : 16.4, 70.8 : 11.2 : 19.6와 같이 3가지로 제시되었다. 최적배합비로 제조한 파운드 케이크의 냉동 시간은 기준 배합비로 만든 케이크보다 $45{\sim}27%$가 단축되었으며, 동결점은 $-20^{\circ}C$이하에서 나타났다. 동결방지제의 적절한 배합율을 적용하면 빙점강하에 의해 가공식품 냉동에 필요한 냉동 에너지 감소 효과를 얻으며 기존제품과 유사한 품질 특성을 구할 수 있음을 알았다.
저염상태에서 속성 발효를 통한 멸치 어간장의 대량 생산을 위하여 시중 어간장에서 단백질 분해효소 생산이 우수한 균주를 분리 동정하여, B. amyloliquefaciens HTP-8로 명명하였다. 효소생산을 위한 배양 최적온도, 초기 pH, 그리고 배양시간은 각각 $30^{\circ}C$, pH 7.0과 3일이었다. Jar fermenter 배양시 pH를 7.0으로. 조절한 경우가 조절하지 않은 경우에 비해 효소활성이 최대에 이르는 시간이 단축되었다. 효소의 부분정제는 조효소액을 80% ammonium sulfate에 의한 염석과 CM-Sephadex C-50을 이용하여 정제한 결과, 수율이 0.4%, 정제배수가 43.0배였다. 정제효소의 최적 pH와 온도는 pH 10.0과 $50^{\circ}C$였으며, pH 7.0~l2.0의 pH 범위와 $40^{\circ}$ 이하에서 안정하였다. 금속이온 중 $Ag^{+}$ /, $Ba^{2+}$ /에 의하여 효소활성이 저해되었다. 한편, 본 효소는 PMSF에 의하여 선택적으로 활성이 억제됨으로써 활성부위에 serine을 가진 serine protease에 속하는 것으로 판단되었다.
Poly-${\beta}$-hydroxybutyrates(PEB)는 토양에서 완전히 이산화탄소와 물로 분해되는 세포 내에 생성되는 고분자 물질로 잘 알려져 있다. Alcaligenes eutrophus의 세포 성장과 PHB의 생산성을 증가시키기 위해서 가압배양법이 사용되었다. 실험 데이타를 다양한 가압과 온도하에서 탄소 공급원과 기체성분의 영향에 관해서 분석한 결과 0.0075vvm의 기체수소를 공급한 배양이 수소를 공급하지 않은 배양에 비해 더 나은 PEB 생산성을 나타내었고, 6atm, $30^{\circ}C$에서 산소의 성분비를 2%에서 8%로 변화시켰을 때 더 높은 수율과 PEB의 생산성을 얻을 수 있었다.
Leuconostoc citreum HJ-P4 is a strain isolated for kimchi fermentation with its low temperature-adapted growth feature and its high dextransucrase activity. The detailed characteristics of cell growth and dextran sucrase activities were investigated at various environmental conditions such as temperatures, pHs, salts, and raw ingredients. This strain showed almost 2-fold higher maximal cell concentration ($X_{max}$) than that of the type culture Leuconostoc mesenteroides B-512F at $10^{\circ}C$. The $X_{max}$ of the strain was maximum at pH 7 and the cell growth was inhibited by salts in a dose-dependent mode up to 7%. Addition of pepper (<6%), garlic (<10%), and ginger (<2%) in kimchi gave no inhibition effect on the growth of HJ-P4. Dextransucrase synthesized by this strain retained over 80% of its maximum activity at $10^{\circ}C$ showing a comparable cold-adapted feature to its host microbe. This culture can be used as a starter culture in the industrial kimchi production giving desirable functions and predominance at low temperature.
Objective: To evaluate the effect of lactic acid bacteria and storage temperature on the microbial, chemical and mycotoxin composition of corn silage. Methods: Corn was harvested at 32.8% dry matter, and chopped to 1 to 2 cm. The chopped material was subjected to three treatments: i) control (distilled water); ii) $1{\times}10^6$ colony forming units (cfu)/g of Lactobacillus plantarum; iii) $1{\times}10^6cfu/g$ of Pediococcus pentosaceus. Treatments in triplicate were ensiled for 55 d at $20^{\circ}C$, $28^{\circ}C$, and $37^{\circ}C$ in 1-L polythene jars following packing to a density of approximately $800kg/m^3$ of fresh matter, respectively. At silo opening, microbial populations, fermentation characteristics, nutritive value and mycotoxins of corn silage were determined. Results: L. plantarum significantly increased yeast number, water soluble carbohydrates, nitrate and deoxynivalenol content, and significantly decreased the ammonia N value in corn silage compared with the control (p<0.05). P. pentosaceus significantly increased lactic acid bacteria and yeast number and content of deoxynivalenol, nivalenol, T-2 toxin and zearalenone, while decreasing mold population and content of nitrate and 3-acetyl-deoxynivalneol in corn silage when stored at $20^{\circ}C$ compared to the control (p<0.05). Storage temperature had a significant effect on deoxynivalenol, nivalenol, ochratoxin A, and zearalenone level in corn silage (p<0.05). Conclusion: Lactobacillus plantarum and Pediococcus pentosaceus did not decrease the contents of mycotoxins or nitrate in corn silage stored at three temperatures.
양돈농가에서 설치되어 운영되고 있는 퇴비화시설에 대한 수분 증발량에 대한 조사결과를 요약하면 다음과 같다. 1. 돼지사육 두수는 단순 퇴비사 1,433두/호, 기계교반 퇴비화 시설 설치농가는 3,500두/호 이었다. 2. 퇴비화시설의 용적은 단순 퇴비사 $0.33m^3$/두, 기계교반 퇴비화시설 설치농가는 $0.25m^3$/두로 퇴비화시설 용적이 약 24.2% 정도 적은 것으로 조사되었다. 3. 조사농가의 수거돈분의 평균 수분 함량은 단순퇴비사 86.8%, 기계교반 85.7%로 기계교반 퇴비화시설 설치농가의 돈분의 수분 함량이 약 1.3% 정도 낮은 것으로 조사되었다. 4. 1일 투입되는 수분량은 단순 퇴비사 $4.1kg/m^3$/일, 기계교반 퇴비화시설 설치농가는 $6.5kg/m^3$/일로 기계교반 설치농가에서 약 36.9% 정도 단위면적당 수분량이 높게 투입되는 것으로 조사되었다. 5. 퇴비화기간동안의 발효온도는 단순퇴비화 시설에서 최고온도가 $45^{\circ}C$ 정도 상승하였으나, 기계교반 퇴비화시설 설치농가에서의 최고 발효온도는 $70^{\circ}C$까지 상승하는 것으로 조사되었다. 6. 수분 감소량은 퇴비화 시설 $1m^3$당 단순퇴비사 3.7 kg, 기계교반 5.2 kg으로 기계교반 퇴비화 시설이 약 28.8% 높은 것으로 조사되었는데 이는 퇴비더미내 발효온도 차이에 의한 원인인 것으로 판단되어졌다. 7. 퇴비화후 비료성분 함량은 질소 함량은 각각 0.84% 및 0.86%로 비슷한 경향으로 조사되었으며, ${P_2}{O_5}$(%) 성분도 0.78% 및 0.74%로 단순퇴비화시설에서 약간 높은 경향을 보였다. 그러나 OM 및 OM/N은 처리간에 큰 차이가 없는 것으로 조사되었다. 8. 따라서 양돈농가에서의 기계교반 및 단순퇴비화 시설을 이용하여 돈분뇨를 퇴비화하는 경우 돈분의 수분함량과 발효온도 및 수분 증발가능량 등을 고려하여 퇴비화 효율을 향상시키는 노력이 필요할 것으로 생각된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.