• Journal of Biosystems Engineering
• /
• v.33 no.4
• /
• pp.276-281
• /
• 2008

A flow injection analysis method (FIA), which analyzes sample conditions after injecting a sample and reagents into a continuous stream, are recognized as the most adequate analyzing method according to the increase of sampling frequency, the decrease of measuring time and the diversity of measuring targets. Specially, the FIA is considered to be used effectively for the control of a fermentation process to produce fermentation food and useful microbial production by activation of a fermentation industry for development of biological materials. In this study, a flow injection analysis sensor unit was developed for on-line monitoring of the fermentation process. The performance was verified by on-line measuring the concentration of glucose of the fermentation process of wine. The glucose concentrations of the samples were measured every 12 hours during the whole fermentation process and compared with those by a HPLC. The concentration relative errors of glucose on the fermentation process of wine showed below 30% within 72 hours and over 50% after the 72 hours. The sensor unit had potential to on-line monitoring of the fermentation process but some problems to overcome for an commercial application.

• Korean Journal of Food Science and Technology
• /
• v.22 no.6
• /
• pp.686-689
• /
• 1990

For the monitoring of kimchi fermentation states, pressure detecting sensor and monitoring device were designed and fabricated. The system was consisted of an air tight fermenting tube(31.5 ml), strain gauge type pressure sensor and signal processing device built with operational amplifier and A/D converter, and interfaced to personal computer. Chiness cabbage kimchi was fermented in the plastic container($150{\times}220{\times}160mm$) at $25^{\circ}C\;and\;30^{\circ}C$. The fermentation was monitored with fermenting tubes containing kimchi. The pressure based kimchi fermentation curve was constructed and showed a typical kimchi curing curve having 2 stepwise pressure increasing pattern.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.9
• /
• pp.141-146
• /
• 2015

Recently, people are consuming more fermented food for its health benefits. When we think of fermented food, skate comes to mind. However, there are different preferences depending on the degree of fermentation. Thus, if there is a system that shows the degree of the fermentation on skate, people can eat according to their taste. This paper proposes a design of skate fermentation monitoring system for consumer taste using the smart RFID tag. The proposed system consists of the RFID tag, $NH_3$ sensor, reader, and server. In order to confirm the usefulness of the proposed system, we performed experiments on the skate fermentation. The proposed monitoring system can show the skate fermentation at 4 grades: None, Low, Medium, and Strong. With the smart RFID tag, we successfully estimated the skate fermentation.

• KSBB Journal
• /
• v.13 no.4
• /
• pp.461-467
• /
• 1998

A fermentation system was supplemented with a device for the measurement of the durations of alkali pump feeding for automatic pH control and an A/D convertor for precise monitoring of pH value by computer. A software program was developed to measure buffer capacities from the pH signal and the pH control signal during fermentation. By measuring the buffer capacity on-line, levels of acetic acid were estimated by a software sensor using pH signal in a fermentation process of E.coli growing in a minimal medium. The measured values of acetic acid showed correlation to those of estimated by the software sensor. Lacitic acid production was also successfully estimated by the values of buffer capacities measured on-line.

• Korean Journal of Food Science and Technology
• /
• v.34 no.1
• /
• pp.30-36
• /
• 2002

To use overproduction muskmelon effectively, muskmelon vinegar was prepared by two stage fermentations of alcohol and acetic acid. In the alcohol fermentation using muskmelon, alcohol content showed maximum value (7.47%) in $17.83^{\circ}Brix$ of initial sugar concentration and 82.65 h of fermentation time. Acetic acid content in alcohol fermentation revealed minimum value (0.46%) in $12.17^{\circ}Brix$ of initial sugar concentration and 60.56 h of fermentation time. The fermentation conditions for minimum residual sugar were $10.02^{\circ}Brix$ of initial sugar concentration and 105.61 h of fermentation time. The optimum conditions predicted for each corresponding physical properties of acetic acid fermentation were 200 rpm (agitation rate), 250 h (fermentation time) in acetic content and 200 rpm, 150 h in residual alcohol content.

• Journal of the East Asian Society of Dietary Life
• /
• v.8 no.1
• /
• pp.57-65
• /
• 1998

To utilize deteriorated sweet persimmon effectively, response surface methodology(RSM) was used to determine the optimal vinegar fermentation conditions and monitored by a divided two stage fermentation. The optimum conditions for maximum alcohol content were obtained when the first stage (alcohol fermentation) was carried out with an initial sugar concentration of 18.5$^{\circ}$Brix, agitation rate of 140.8 rpm, fermentation time of 127.6 hr. When sugar concentration was 14$^{\circ}$Brix maximum alcohol content(7.1%) was predicted at fermentation conditions of 160 rpm in agitation rate, 140hr in fermentation time. The optimum conditions for maximum acidity were obtaiend when second stage(vinegar fermentation)was carried out 249.5 rpm in agitation rate, 148.8 hr in fermentation time. Predicted values at the optimum conditions were similar to experimental values.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.5
• /
• pp.432-441
• /
• 2006

2D fluorescence sensors produce a great deal of spectral data during fermentation processes, which can be analyzed using a variety of statistical techniques. Principal component analysis (PCA) and a self-organizing map (SOM) were used to analyze these 2D fluorescence spectra and to extract useful information from them. PCA resulted in scores and loadings that were visualized in the score-loading plots and used to monitor various fermentation processes with recombinant Escherichia coli and Saccharomyces cerevisiae. The SOM was found to be a useful and interpretative method of classifying the entire gamut of 2D fluorescence spectra and of selecting some significant combinations of excitation and emission wavelengths. The results, including the normalized weights and variances, indicated that the SOM network is capable of being used to interpret the fermentation processes monitored by a 2D fluorescence sensor.

• Food Science and Biotechnology
• /
• v.15 no.4
• /
• pp.595-598
• /
• 2006

Semi-quantitative monitoring of Lactobacillus sake and Lactobacillus plantarum, major and minor microorganisms in kimchi, respectively, and Lactobacillus paraplantarum, recently shown to be present in kimchi, was carried out by real-time polymerase chain reaction (PCR). Changes in the 3 species during kimchi fermentation were monitored by the threshold cycle ($C_T$) of real-time PCR. As fermentation proceeded at $15^{\circ}C$, the number of L. sake increased dramatically compared to those of L. plantarum and L. paraplantarum. During fermentation at $4^{\circ}C$, the growth rates of the 3 species decreased, but the proportions of L. plantarum and L. paraplantarum in the microbial ecosystem were almost constant. Considering the $C_T$ values of the first samples and the change in the $C_T$ value, the number of L. sake is no doubt greater than those of L. plantarum and L. paraplantarum in the kimchi ecosystem. L. sake seems to be one of the major microorganisms involved in kimchi fermentation, but there is insufficient evidence to suggest that L. plantarum is the primary acidifying bacterium.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.4
• /
• pp.699-709
• /
• 2023

This study is to establish optimizing condition of alcohol fermentation in vinegar production with aronia, to confirm whether this can be industrially used, and to compare and analyze a change in anti-oxidative activity and quality characteristic according to alcohol fermentation of aronia. The optimized conditions for alcohol fermentation were as follows: Saccharomyces cerevisiae 5645 of yeast strain, a 5% inoculum size, aronia juice with a brix value of 14, and a glucose content of 7%. As a result to conduct scale up with optimizing conditions of alcohol fermentation of aronia, 8 days (192 hrs) of total alcohol fermentation time and 7.4% of the final alcohol content. The harvest volume accounted for approximately 90.2% with a loss of about 2.8%. As a result of antioxidant test, anti-oxidative activity of alcohol fermented liquor is lower than anti-oxidative activity of aronia extract, because of the decrease of antioxidant by oxidation of the fermentation process. However, the decrease of tannin by the fermentation process reduces acerbity of aronia, so increases overall preference

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.5
• /
• pp.679-683
• /
• 2003

Strawberries were fermented for their effective value added product. In alcohol fermentation of strawberries, alcohol content was maximum value (9.22% ) under the condition of 16.32$^{\circ}$Brix of initial sugar concentration, 53.03 hr of fermentation time and 28.8$^{\circ}C$ of fermentation temperature. Acetic acid content revealed minimum value (0.49%) under the condition of 13.18$^{\circ}$Brix of initial sugar concentration, 50.99 hr of fermentation time and 24.96$^{\circ}C$ of fermentation temperature. Residual sugar content revealed minimum value (3.97$^{\circ}$Brix) under the condition of 15.00$^{\circ}$Brix, 52.00 hr and 26.0$0^{\circ}C$. The optimum conditions for each alcohol fermentation were 14$^{\circ}$Brix, 50 hr and 28$^{\circ}C$.