• 자원환경지질
• /
• 제21권4호
• /
• pp.381-387
• /
• 1988

Maewol Feldspar Mine produces feldspar ore from pegmatites. K-Rb Age of muscovite is 137.7Ma. Fluid inclusions in quartz crystal of the pegmatite show bimodal distribution of homogenization temperatures. The high homogenization temperatures range from 290 to $302^{\circ}C$ while low homogenization temperatures range from 157 to $195^{\circ}C$. Three phases liquid $CO_2$ bearing inclusions indicate $CO_2$ gases were abundantly mixed with granitic melt until the pegmatic magma melt cooled to $290^{\circ}C$. Low density of the magmatic melt relative to the same volume of granitic magma is due to mixture of volatiles(mainly $CO_2$ gases) with the melt and larger space and slow cooling allowed to grow crystals of the pegmatic magma.

• 한국세라믹학회지
• /
• 제32권1호
• /
• pp.71-82
• /
• 1995

The weathered two-mica granite is widely distributed in Korea and called a kind of ground rock for kaolin. The major minerla compositions are consist of this quartz, feldspar, mica and clay mineral. At present, only a small portion of this granite is used as the material for the low-grade tile industry due to the low S.K. value and the high contents of impurities such as Fe2O3 and FeO. The low S.K. value is caused by feldspars not weathered to clay minerals. The refinement of this thus has been required for the recent shortage of the resources of high-grade one. This paper concerns an optimum hydrothermal treatment condition to refine the low-grade weathered two-mica granite of which impurities are feldspar mineral and Fe2O3. FeO components in using for the main material of ceramic industry. And then, from this result, we tried to fine out the basic formation mechanism of clay mineral from feldspar etc and develope the effectual utilization method of this.

• 한국세라믹학회지
• /
• 제19권3호
• /
• pp.241-249
• /
• 1982

Two dinnerware porcelain bodies involving partial replacement of feldspar and kaoline by about 35wt% domestic GYUNGJU-pottery stone were developed and their properties such as shrinkage, porosity, firing range, linear thermal expansion, pyroplastic deformation, degree of whiteness and mechanical strength were compared with those of a traditional clay-flint-feldspar body. The experimental results showed that one of the clay-flint-feldspar-pottery stone body with 1% ZnO addition had the firing range of 115$0^{\circ}C$~121$0^{\circ}C$, whereas the traditional body had the firing range of 12$25^{\circ}C$~129$0^{\circ}C$. The linear drying shrinkage and linear dry-to-fired shrinkage of all bodies were 2.5~4.5% and 15~18%, respectively. And the major crystalline phases of sintered bodies were $\alpha$-quartz and secondary mullite surrounded by glassy phases. The modulus of rutpture of sintered bodies was ranged from 860 to 870kg/$\textrm{cm}^2$, and the microhardness of sintered bodies was 680 kg/$\textrm{cm}^2$.

• 한국세라믹학회지
• /
• 제19권3호
• /
• pp.215-222
• /
• 1982

This study is to investigate the effect of a domestic pottery stone as a batch inclusion on the synthesis of porcelain bodies and their physical properties. The basic composition of porcelain bodies studied was consisted of 50wt% kaolin, 25wt% feldspar and 25wt% quartz. The inclusion of pottery stone was performed by partial substitution for either quartz or feldspar up to 25% of the total weight of batches. Sixteen porcelain bodied different in batch composition were prepared by firing them in the temperature range from 110$0^{\circ}C$ to 135$0^{\circ}C$ and their physical properties and microstructures were carefully examined. It was found that the inclusion of pottery stone could reudce the firing temperature for vitrification up to 5$0^{\circ}C$ but appreciably decreased the mechanical strength of sintered bodies. The most faborable result could obtain with partial substitution for both quartz and feldspar at same time up to 25% of the total batch weight.

• 자원환경지질
• /
• 제24권4호
• /
• pp.379-391
• /
• 1991

The studied Cretaceous granties are widely distributed at the southern Mungyeong area in the southwestern part of Ogcheon Fold Belt. From the mineralogical and geochemical compositions, it is suggested that they show the characteristics of I-type and magnetite-series and formed under the conditions of high oxygen fugacity. The mineral chemistry of plagioclase, alkali feldspar and biotite in the granites by EMPA, was revealed as albite to oligoclase, microcline to microcline perthite and orthoclase perthite, and annite compositions, respectively. The granites have the distribution patterns of enriched LREE and depleted HREE, and show Eu negative anomalies suggesting mainly due to the feldspar fractionation in the residual magma. The geochemical data of Eu, EU/$^*Eu$, Sm and Gd suggest that the granites of the area have more abundant alkali feldspar crystallization than plagioclase. From the geochemical characteristics of Sr/Ba, La/Sm vs. Ce/Yb and other trace element evidences, the granites were the late stage products of differentiation and fractionated from a homogeneous parental granitic magma.

• 암석학회지
• /
• 제6권3호
• /
• pp.226-243
• /
• 1997

오대산편마암복합체는 미그마타이트질편마암과 반상변정질편마암이 주를 이루며, 소규모의 규암, 앰피볼라이트, 대리암 및 우백질편마암 등이 렌즈상으로 협재되어있다. 이 지역은 최소 2회의 공역변성작용을 받았다. 1차 변성작용시 변성정도는 흑운모-백운모-사장석-석영, 석류석-흑운모-백운모-K-장석-사장석-석영의 광물조합 등을 보이는 동부 및 서남부지역의 K-장석-백운모분대로부터 석류석-흑운모-K-장석-사장석-석영, 흑운모-K-장석-사장석-석영, 석류석-흑운모-K-장석-사장석-규선석-스피넬-석영의 광물조합을 보이는 북서부지역의 K-장석-석류석분대로 증가한다. 사장석 내부에 남정석이 잔류물로 나타난다. 2차 변성작용은 근청석의 생성이 특징적이다. 2차 변성작용시의 변성정도는 근청석-석류석-규선석-흑운모-백운모-석영, 근청석-석류석-스피넬-규선석-흑운모-백운모-석영의 광물조합을 보여주는 개인산을 중심으로하는 석류석-근청석 분대로부터 방사상으로 감소한다. 그 결과 근청석-규선석-흑운모-사장석-석영, 근청석-흑운모-백운모-사장석-석영, 규선석-흑운모-백운모-사장석의 광물 조합을 가지는 규선석-근청석분대가 석류석-근청석분대를 둘러싸며 나타난다. 석류석-흑운모-규선석-K-장석-사장석-스피넬의 광물조합으로부터 계산된 1차 변성작용시의 최대 변성압력-온도조건은 5.4~7.4kb, $776~789^{\circ}C$이나 상평형관계를 고려할 때 실제 변성압력-온도조건은 계산된 조건보다 높았을 가능성이 있다. 사장석내에 잔존하는 석류석-흑운모-사장석에 대한 변성압력-온도조건은 12.5kb, $650^{\circ}C$로 1차 변성작용이 매우 높은 압력경로를 거친후 최대변성 온도조건에 도달했음을 지시한다. 2차 변성작용에서 석류석-흑운모-근청석-스피넬-석영의 광물조합에서 계산된 2차 변성작용시의 압력-온도조건은 6 kb 이하, $680~750^{\circ}C$이다. 오대산편마암복합체에서는 고압의 변성작용과 급격한 지각의 상승을 거친후 중압고온의 1차 변성작용이 일어났으며 구룡층군의 퇴적이후 저압고온의 2차 변성작용이 일어났다.

• 한국세라믹학회지
• /
• 제14권1호
• /
• pp.7-11
• /
• 1977

Domestic Anyang feldspar was treated in autoclave with 1N sodium hydroxide solution for 1-6 hrs at 100-20$0^{\circ}C$ By X-ray diffraction patterns and cation exchange capacity, the products were examined. The following concecutive reaction was valid. AlbitelongrightarrowAmorphous aluminosilicatelongrightarrowAnalcime The reaction rate constants, k1 and k2, were 0.20 and 0.15(1/hr) at 20$0^{\circ}C$ respectively. The activiation energy from albite to amorphous aluminosilicate was 10 kcal/mol, and from amorphous aluminosilicate to analcine 13 kcal/mol. The analcime obtained was excellent in cation exchange capacity, amounting to 210meq./100g.

• 자원환경지질
• /
• 제28권2호
• /
• pp.123-137
• /
• 1995

The Mesozoic Geumsan granitic rocks of various composition are distributed in the Geumsan district, the central part of the Ogcheon Fold Belt. About 40 ore deposits of $CaF_2{\pm}Au{\pm}Ag{\pm}Cu{\pm}Pb{\pm}Zn$ are widely distributed in this district and are believed to be genetically related to the granitic rocks. Based on their petrography and geochemistry, the granitic rocks in this district can be classified into two groups ; the Group I( equigranular leucocratic granite, porphyritic biotite granite, porphyritic pink-feldspar granite, seriate leucocratic granite) and the Group II(seriate pinkfeldspar granite, equigranular alkali-feldspar granite, equigranular pink-feldspar granite, miarolitic pink-feldspar granite, equigranular biotite granite). Interpreted from their isotopic dating data and geochemical characteristics, the Group I and the Group II are inferred to be emplaced during the Jurassic(~184Ma), and the Cretaceous to the early Tertiary period(~59Ma), respectively. Both Group I and Group II generally belong to magnetite-series granitoids. The Cretaceous granitic rocks of Group II are more highly evolved than those of the Jurassic Group I. The Rb-Sr variation diagram suggests that the granitic rocks of the Jurassic Group I and of the Cretaceous Group II be evolved mainly during the processes of fractional crystallization and partial melting, respectively.

• 복합신소재구조학회 논문집
• /
• 제6권4호
• /
• pp.8-15
• /
• 2015

The demand for environmental consideration is on the increase in civil engineering. This study focuses on the development of technology to reduce the use of carbonate cement and improve its performance by using a silicate mineral and hardening agents, and presents the test results for the demonstrative evaluation of the properties of the raw material. Highly active feldspar was used as a binder to augment the bonding of the carbonate cement, and their change in strength was observed after test piece construction with the addition of soluble hardening agent. The uniaxial compression strength of the test piece of the general Portland cement with the addition of 0.5% soluble hardening agent, showed an increase by 33% and that of the test piece of cement with the addition of 70% substituted with feldspar increased by 28%. The strength of viscous soil; classified as soft ground, showed an increase of a maximum of 1.7 times when it was mixed with cement and solidifier depending on the curing period. These tests confirmed that a soluble solidifier is effective for improving the strength of a cement binder and that the highly active feldspar can be used as a binder.

• 자원리싸이클링
• /
• 제10권4호
• /
• pp.42-47
• /
• 2001

알루미늄 드로스와 장석을 이용하여 무기발포재의 제조 가능성을 검토하여 폐기물인 알루미늄 드로스의 재활용 및 자원화의 다양성을 제시하기 위한 실험을 행하였다. 소성한 발포재의 경우 장석은 소성온도에서 용해되어 비정질상으로 전이하고 드로스 중의 성분들이 Spinel($MgA1_2$$O_4$)을 형성한다. 장석 55 wt%, 드로스 40 wt%, 벤토나이트 5 wt% 시료의 경우 소성온도 $1220^{\circ}C$에서 소성시간이 증가할수록 밀도는 0.91에서 0.65까지 감소하고, 흡수율은 약 2.5에서 1.7%의 범위의 값을 나타냈다. $1220^{\circ}C$에서 30분 소성할 경우 굽힘강도는 10.8 MPa이며, 열전도도는 0.34 W/m.K로서 최대치를 나타냈다.